Category:

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#80314

- Convection cooling
- Extremely low noise
- Internally Mounted Constant Voltage Transformers
- Switchable 120V/240V power supply (internal)
- Extensive protection circuitry
- Rear panel level attenuators for each channel
- 6-Step Signal Level and Clip LEDs
- Euroblock inputs/outputs
- Selectable input sensitivity
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#55608

- Convection cooling
- Extremely low noise
- Internally Mounted Constant Voltage Transformers
- Switchable 120V/240V power supply (internal)
- Extensive protection circuitry
- Rear panel level attenuators for each channel
- 6-Step Signal Level and Clip LEDs
- Euroblock inputs/outputs
- Selectable input sensitivity
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#50304

- Six Balanced 1/4” - XLR Inputs
- Low-Noise Mic Preamp Circuitry
- High Gain (92dB Channel Input to Program Output) Ensures Full Output with Low Level or Distant Mics
- Two-Band EQ on Each Input
- Input Level and Pan Controls on Each Input
- Clip LED’s on Each Input
- Eleven-Step LED Output Level Metering
- 48V Phantom Power for Condenser Mics
- Six Channel Inserts
- Aux Send Controls
- Balanced 1/4” Stereo Outputs
- Transformer Balanced XLR Mono Outputs
- Stereo Headphone Jack with Level Control
- Auxiliary Line Inputs and Outputs
- Three Position Input Gain Switch
- 20dB Microphone Pad Switch
- Stereo Line Input Control
- Front Panel 3.5mm Stereo Line Input
- Aux Master Output Control
- Internal Power Supply
- Safety/Compliance: cTUVus/CE, RoHS, FCC
INV#38792

- 10/100 Ethernet and RS-232 computer interface Is standard
- Extensive DSP Available
- Easy and intuitive user interface
- Mic/Line inputs
- 24-bit A/D-D/A audio resolution
- 24-bit/150 MHz DSPs
- Up to 24 channels of audio processing
- 4x4 base unit configuration
- Expand inputs or outputs 4 channels per module
- Modules easily field installable
- Euroblock connectors for audio, preset recall, DC remote level and data
- 31 preset locations
- Four dedicated remote controls for Level, Preset Recall and Programmable Functions
- Third Party Control Friendly
- Input and output metering viewable in dBu
- Multi-level Security
- Five year warranty
- Safety/Compliance: FCC, CE, RoHS
INV#71930

- One Rack Space
- Three Inputs - Six Outputs
- Extremely Intuitive User Interface
- Crossover, EQ, Delay and Limiter Functions
- Outputs Assignable to Any Input
- Superior Sonic Quality
- Front Panel Or PC Programming and Control
- USB and RS-232 Interface
- Third Party Control Friendly
- XLR Audio Connections
- Balanced Inputs and Outputs
- Parametric Filters and Comp/Limiter to Control Feedback Problems
- Linkwitz-Riley, Bessel and Butterworth Filters 12, 18, 24 and 48dB/Octave Slopes
- Parametric EQ: 1/64th to 4 Octave Range
- 682ms Input and Output Delay
- Limiter on Each Output
- Individual Input and Output Metering
- Four Levels of Security
INV#58205

- Remote Control for your system
- Visual indication verifies changes
- Preset Recall
- Preset Scroll
- Input Gain Control
- Matrix Mix Gain Control
- Output Gain Control
- Zone Source Select
- Channel Mute
- Logic High/Low
- Lock-Out Feature
INV#88326

- Balanced Inputs and Outputs
- Eight Stereo or Sixteen Mono Inputs
- Individual Left, Right and Mono Outputs
- Channel 1 & 2 Selectable Mic or Line Inputs
- Unity Gain Signal Path Throughout When all Level Controls are Set at Twelve O’ Clock
- L & R Level Meters w/Clip Indicators Monitor all Internal Amplifiers
- Pre-Master Sub Inputs & Outputs for Linking Multiple Mixers
- Front Panel 3.5mm Stereo Line In Jack
- Individual Channel Mute Switches
- Stereo Output Mute Switch
- Stereo Headphone Output with Level Control
- Safety/Compliance: cTUVus/CE, RoHS, FCC
INV#37572

- Precision Alps motorized 100mm fader Responsive, 7" color LCD touchscreen for graphical viewing, assign, and setup
- FREE iPad App for wireless remote control
- EZ-Mode for secure, simplified touchscreen or iPad control with EZ-Mode mixer
- Ships as desktop console, rack rails included
- 16 low noise microphone preamps with dedicated trim controls, +48V phantom power, phase invert
- Gain-sharing automixer
- Assignable cross fader
- Stereo AUX sends for stereo monitors
- 2 dedicated line-level inputs
- TRS inserts on channels 1-8
- 8 AUX sends, 6 DCA for fader or mute groups
- 2 internal stereo FX with fully editable reverbs, delay with tap tempo, tremolo, flange, and chorus
- Pan control
- High resolution delay (0.2mS) on every input, AUX, or FX
- Expander/noise gate on every input and FX channel
- Comp/limiter on every input, output, and FX channel
- 4-band parametric/shelving EQ filters plus HPF/LPF on every input, output, and FX channel
- 31-band Graphic EQ on main and AUX outputs
- Stereo link for adjacent inputs and AUX outputs
- Solo/PFL on every input, output, AUX, or FX
- Stereo main outputs on XLR and phone jack with dedicated level control
- Headphone and control room outputs with dedicated level controls
- User presets for Scene, DSP channel, FX or GEQ settings, plus channel copy function
- 24-bit A/D and D/A converters, 32-bit DSP processing, 48kHz sampling rate
- Password security
- Software control using Windows®, Mac®, or iPad®
- Internal 100-240VAC universal power supply
- Dante® Network Audio Interface (optional)
- USB Multi-track Audio Interface (optional)
- Safety/compliance: cTUVus, FCC, RoHS
INV#226662

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#80313

- 3-Band Channel EQ w/ Sweepable Mid Frequency Center
- +48V Phantom Power
- High Gain (84dB Channel Input to Program Output) Ensures Full Output with Low Level or Distant Mics
- Transformer Isolated Outputs +24dBm 600 ohm
- Balanced XLR Stereo Program Outputs w/Left and Right Master Controls and Mute Switching
- Insert Jacks on Each Channel
- Independent Mono Output w/Level Control
- Front Panel 3.5mm Stereo Line Input
- 2 Aux Sends per Channel
- 2 Master Aux Sends
- 2 Master Aux Returns
- (1-Stereo & 1-Mono, both Panable)
- Five Year Worry-Free Warranty
- Safety/Compliance: cTUVus/CE, RoHS, FCC
INV#29282

- Set of 2 Aluminum Security Locking Knobs for KLR
- Front Panel Volume Controls
INV#192380

- Convection cooling
- Extremely low noise
- Extensive protection circuitry
- Level attenuators for each channel
- Signal present and clip alert status L.E.D.'s
- Stereo headphone jack
- Euroblock inputs/outputs
- Selectable input sensitivity and HPF
- Normal or bridged mode switch on each channel
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#42161

- 70V model
- Eight Channel Amplifier
- Ethernet control is standard
- Extensive DSP Available
- Easy and intuitive user interface
- Extensive protection circuitry
- Safety/Compliance: CE, FCC, RoHS
INV#52985

- 24dB/Octave Slope
- Mode switch for stereo 2-way or mono 3-way operation
- Ashly Exclusive Variable Filter Response Control
- Low Frequency Summed Mono Output
- Divide by 10 range switch on both channels
- XLR and 1/4" Inputs and Outputs
- 20Hz Third Order Hi-Pass Filter
- Peak Overload Warning Lights
- Individual Level Control and Mute Switch on All Outputs
- Active Balanced Inputs
- Servo-Balanced Outputs
- XLR and TRS 1/4" Connectors
- Universal 100-240VAC Internal Power Supply
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#36108

- High Gain (84dB Channel Input to Program Output) Ensures Full Output with Low Level or Distant Mics
- Transformer Isolated +24dBm 600 ohm Balanced XLR Mono Output
- Pan Control on Each Channel
- Auxillary Tape/CD Inputs and Outputs
- +48V Phantom Power for Condenser Mics
- Front Panel 3.5mm Stereo Line In Jack
- Stereo Headphone Jack with Level Control
- Safety/Compliance: cTUVus/CE, RoHS, FCC
INV#9913

- One Rack Space
- Four Inputs - Eight Outputs
- Extremely Intuitive User Interface
- Crossover, EQ, Delay and Limiter Functions
- Outputs Assignable to Any Input
- Superior Sonic Quality
- Front Panel Or PC Programming and Control
- USB and RS-232 Interface
- Third Party Control Friendly
- XLR Audio Connections
- Balanced Inputs and Outputs
- Parametric Filters and Comp/Limiter to Control Feedback Problems
- Linkwitz-Riley, Bessel and Butterworth Filters 12, 18, 24 and 48dB/Octave Slopes
- Parametric EQ: 1/64th to 4 Octave Range
- 682ms Input and Output Delay
- Limiter on Each Output
- Individual Input and Output Metering
- Four Levels of Security
INV#58212

- 125W per channel
- 8-in x 8-out sophisticated matrix mixing
- 8 built-in mic pre's
- Gain sharing automatic microphone mixing (Automixer)
- Automatic feedback suppression
- Ambient noise compensation
- Dedicated telephone/PBX input
- Dual RCA and balanced euroblock inputs
- Post DSP AUX line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Built-in pink/white noise & sine wave generator
- Extensive signal processing: Full suite of Ashly NE Series DSP
- Hot-plug DSP placement, 96kHz or 48kHz sample rate
- 32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
- 15V phantom power
- Full control using Ashly software over 10/100 baseT Ethernet
- Easy and intuitive user interface
- Automatic DHCP network IP configuration
- Euroblock connectors for preset recall, DC remote level control and data in/out
- External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
- Level control via variable DC control voltage
- Stand-By mode activation via contact closure
- Multi-level Security
- Five year worry-free warranty
INV#80317

- Remote Control for your system
- Visual indication verifies changes
- Preset Recall
- Preset Scroll
- Input Gain Control
- Matrix Mix Gain Control
- Output Gain Control
- Zone Source Select
- Channel Mute
- Logic High/Low
INV#48805

- Convection cooling
- Extremely low noise
- Internally Mounted Constant Voltage Transformers
- Switchable 120V/240V power supply (internal)
- Extensive protection circuitry
- Rear panel level attenuators for each channel
- 6-Step Signal Level and Clip LEDs
- Euroblock inputs/outputs
- Selectable input sensitivity
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#52692

- 125W per channel
- 8-in x 8-out sophisticated matrix mixing
- 8 built-in mic pre's
- Gain sharing automatic microphone mixing (Automixer)
- Automatic feedback suppression
- Ambient noise compensation
- Dedicated telephone/PBX input
- Dual RCA and balanced euroblock inputs
- Post DSP AUX line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Built-in pink/white noise & sine wave generator
- Extensive signal processing: Full suite of Ashly NE Series DSP
- Hot-plug DSP placement, 96kHz or 48kHz sample rate
- 32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
- 15V phantom power
- Full control using Ashly software over 10/100 baseT Ethernet
- Easy and intuitive user interface
- Automatic DHCP network IP configuration
- Euroblock connectors for preset recall, DC remote level control and data in/out
- External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
- Level control via variable DC control voltage
- Stand-By mode activation via contact closure
- Multi-level Security
- Five year worry-free warranty
INV#80318

- 25V model
- Eight Channel Amplifier
- Ethernet control is standard
- Extensive DSP Available
- Easy and intuitive user interface
- Extensive protection circuitry
- Safety/Compliance: CE, FCC, RoHS
INV#52984

- Convection cooling
- Extremely low noise
- Extensive protection circuitry
- Level attenuators for each channel
- Signal present and clip alert status L.E.D.'s
- Stereo headphone jack
- Euroblock inputs/outputs
- Selectable input sensitivity and HPF
- Normal or bridged mode switch on each channel
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#40999

- Convection cooling
- Extremely low noise
- Internally Mounted Constant Voltage Transformers
- Switchable 120V/240V power supply (internal)
- Extensive protection circuitry
- Rear panel level attenuators for each channel
- 6-Step Signal Level and Clip LEDs
- Euroblock inputs/outputs
- Selectable input sensitivity
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#50840

- Adds 4 inputs to Ashly ne24.24m DSP mainframe
INV#54363

- 125W per channel
- 8-in x 8-out sophisticated matrix mixing
- 8 built-in mic pre's
- Gain sharing automatic microphone mixing (Automixer)
- Automatic feedback suppression
- Ambient noise compensation
- Dedicated telephone/PBX input
- Dual RCA and balanced euroblock inputs
- Post DSP AUX line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Built-in pink/white noise & sine wave generator
- Extensive signal processing: Full suite of Ashly NE Series DSP
- Hot-plug DSP placement, 96kHz or 48kHz sample rate
- 32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
- 15V phantom power
- Full control using Ashly software over 10/100 baseT Ethernet
- Easy and intuitive user interface
- Automatic DHCP network IP configuration
- Euroblock connectors for preset recall, DC remote level control and data in/out
- External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
- Level control via variable DC control voltage
- Stand-By mode activation via contact closure
- Multi-level Security
- Five year worry-free warranty
INV#80319

- 3 Inputs
- Independent Input Gain
- Priority Mute
- Signal Presence LEDs
- Zone 2 Output for Selected inputs
- Bass & Treble Controls
- Selectable 400Hz low-cut filter
- Power Saving Mode
- Optional Rack Kit
- Safety / Compliance cCSAus, CE, FCC, RoHS
- 5 Year Warranty
INV#104050

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#100333

- 125W per channel
- 8-in x 8-out sophisticated matrix mixing
- 8 built-in mic pre's
- Gain sharing automatic microphone mixing (Automixer)
- Automatic feedback suppression
- Ambient noise compensation
- Dedicated telephone/PBX input
- Dual RCA and balanced euroblock inputs
- Post DSP AUX line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Built-in pink/white noise & sine wave generator
- Extensive signal processing: Full suite of Ashly NE Series DSP
- Hot-plug DSP placement, 96kHz or 48kHz sample rate
- 32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
- 15V phantom power
- Full control using Ashly software over 10/100 baseT Ethernet
- Easy and intuitive user interface
- Automatic DHCP network IP configuration
- Euroblock connectors for preset recall, DC remote level control and data in/out
- External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
- Level control via variable DC control voltage
- Stand-By mode activation via contact closure
- Multi-level Security
- Five year worry-free warranty
INV#80321

- Convection cooling
- Extremely low noise
- Extensive protection circuitry
- Level attenuators for each channel
- Signal present and clip alert status L.E.D.'s
- Stereo headphone jack
- Euroblock inputs/outputs
- Selectable input sensitivity and HPF
- Normal or bridged mode switch on each channel
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#40858

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#80315

- Pema Network Power Amp 8 x 250W @ 4 Ohms with 8 x
- 8 DSP Processor
INV#149965

- Adds 4 outputs to Ashly ne24.24m DSP mainframe
INV#52681

- Adds logic output to Ashly ne24.24m DSP mainframe to trigger remote devices
INV#58213