Category:
TB8
BOGEN TB8- Tile Bridge for 8'' (S86/S810) Recessed Speakers
- And AS1 Ceiling Speaker
Series: Bogen All Items
INV#36478
- 4W capacity
- 8" cone speaker for excellent audio quality
- 6 power taps (4W, 2W, 1W, 1/2W, 1/4W, 1/8W)
- Pre-assembled for faster installation
- Steel grille
Series: Bogen All Items
INV#49272
- 6-3/4" mounting depth for installations into a variety of ceiling environments including suspended and hard surface ceilings
- Low-profile housing allows greater range of installation depths
- Computer-matched venting system for full bass output
- Wide dispersion coaxial driver provides broad, even coverage
- For 16-ohm, 70V, & 100V systems
- Off-white finish
- Complies with UL-2043
Series: Bogen All Items
INV#48394
S86T725PG8UVK
BOGEN S86T725PG8UVK- S86T725PG8u, Bright white, w/ Volume Control Knob
Series: Bogen All Items
INV#93903
- Installs into a variety of ceiling environments including suspended and hard surface ceilings
- Large heavy-gauge plated steel back can for deep bass response
- Computer-matched dual venting system for full bass output
- Wide dispersion coaxial driver provides broad, even coverage
- Good off-axis response with smooth contouring
- For 16-ohm, 70V, & 100V systems
- Off-white finish
- Complies with UL-2043
Series: Bogen All Items
INV#36762
TBCR
BOGEN TBCR- Tile Bridge & C-Ring combingation for OCS1,
- HFCS1, and HFCS1LP
Series: Bogen All Items
INV#36763
- 8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules
- Four priority levels
- 4-ohm, 8-ohm, 25V, & 70V outputs
- Rack mountable w/ kit (sold separately)
Series: Bogen All Items
INV#52037
- Fast, easy, clean installation
- Direct and reflected sound paths create wide dispersion angle
- Lightweight and durable plastic shell with a paintable off-white finish
- Complies with NFPA National Code 160b and UL-2043
- For 25V and 70V systems
Series: Bogen All Items
INV#53364
LMM1S
BOGEN LMM1S- Line/Mic Input, Activeley Balanced, Screw Terminal
Series: Bogen All Items
INV#52254
S86T725PG8WVR
BOGEN S86T725PG8WVR- S86T725PG8W, Off-white, w/ Recessed Volume Control
Series: Bogen All Items
INV#52446
DST1
Digital Stereo Tuner- PLL-synthesized tuning with digital readout
- FM Frequency range: 87.00 to 108.05 MHz
- AM Frequency range: 530 to 1710 kHz
- 60 Presets total (FM and AM), with scan feature
- Stereo and Mono outputs (1V minimum) via RCA jacks
- Alphanumeric, fluorescent display panel
- Connectors for 75-ohm FM, 300-ohm FM, and AM loop antennas
- FM dipole and AM loop antennas included
- Volume Control (rear panel-mounted)
- Included accessories: Handheld Remote Control and Stereo Output Cable
- Shelf- or rack-mounted installation, one rack space high (removable rack ears included)
Series: Bogen All Items
INV#57025
S86T725PG8W
8" Ceiling Speaker Assembly (Off-White)- 4W capacity
- 8" cone speaker for excellent audio quality
- 6 power taps (4W, 2W, 1W, 1/2W, 1/4W, 1/8W)
- Pre-assembled for faster installation
- Steel grille
Series: Bogen All Items
INV#36367
DDU250
BOGEN DDU250- Desktop, Dynamic, Uni-directional, Push-Talk/Lock
Series: Bogen All Items
INV#48265
VAR1
BOGEN VAR1- Voice-Activated Relay (req. 12V - 24V Power
- Supply, 100mA)
Series: Bogen All Items
INV#38772
- 30 Watts max. @ 70 volts
- Weatherproof polycarbonate and aluminum construction
- Driver enclosed in weatherproof housing
- 70° × 95° dispersion with rotatable horn flare
- All-purpose mounting bracket provides precise positioning in the vertical and horizontal planes with a single adjustment
- Seven-position, weather-sealed tap selector switch
- Tap settings for 70V: 30, 15, 7.5, 3.7, 1.8 watts
- Self-aligning, field-replaceable diaphragm
- High-intelligibility and efficiency
- Screw terminals for easy audio line connection
- Textured mocha enamel finish on aluminum, matching polycarbonate horn flare
- Limited lifetime warranty
Series: Bogen All Items
INV#48556
- 8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules
- Four priority levels
- Rack mountable w/ kit (sold separately)
- 11-segment LED output level meter monitors the output level of the mixer with A vg./Peak switch
Series: Bogen All Items
INV#48698
- Fast, easy, clean installation
- Direct and reflected sound paths create wide dispersion angle
- Lightweight and durable plastic shell with a paintable off-white finish
- Complies with NFPA National Code 160b and UL-2043
- For 25V and 70V systems
Series: Bogen All Items
INV#52033
- Transformer isolated 4 , 8 , 16 , 25V and 70V taps
- Rear panel auxiliary receptacle
- One dedicated MIC 1 input — Lo-Z balanced
- One switchable MIC 2/Aux 1 input
- Contact muting of Aux input
- Transformer-isolated 600 telephone paging input
- Separate rear panel-mounted TEL volume con- trol
- Voice activated muting of Aux input by Tel input
- Variable trigger threshold for voice activation
Series: Bogen All Items
INV#37849
TEL1S
BOGEN TEL1S- Tel Interface, Loop/Ground Start, Dry Loop, Screw
- Term.
Series: Bogen All Items
INV#34964
- 4-watt capacity
- 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts)
- Works with both 70V and 25V amplifier outputs
- Simulated walnut finish
- 8" cone speaker for excellent audio quality
- 6 oz. magnet weight
- Pre-assembled for faster installation
- Easy wall-mount installation
- Mounting hardware included
Series: Bogen All Items
INV#36366
- 4 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL, plus 1 selectable MIC or AUX
- Each input controlled by an independent volume control
- Treble and bass controls
- AUX muting by external contact closure for push-to-talk microphones
- TEL input for telephone paging applications
- TEL input voice-activated (VOX) mute over AUX input
- Variable threshold for TEL input voice-activated mute
- Output jack to connect a recording device or booster amplifier
- Thermal protection and electronic shutdown
- Rack mountable with accessory mounting kit (model RPK50)
- Listed to UL Standard 60065 for U.S. and Canada
Series: Bogen All Items
INV#10093
TPU100B
100W Telephone Paging Amplifier- Specially designed for telephone paging systems
- 3 inputs: 1 TEL, 1 MIC (Lo-Z), 1 AUX (Hi-Z)
- Built-in night ringer
Series: Bogen All Items
INV#28858
- High intelligibility and efficiency; ideal for both one-way and talk back applications
- Weatherproof, all-metal construction
- Tilt and swivel base for easy positioning
- Screw terminals make installation fast and easy
- All-purpose mounting bracket
- Self-aligning, field replaceable diaphragm
- Textured mocha enamel finish
- Limited lifetime warranty
- Mountable to I-beam flange using Bogen’s BC1 Beam Clamp (sold separately)
- Mountable to electrical box using Bogen’s HSES10 mounting strap (sold separately)
Series: Bogen All Items
INV#56988