Category:
Series:
- Dual, direct radiating long excursion 18" (460mm) drivers
- High temperature 4" (100mm) voice coils
- High power – 138dB continuous, 144dB peak
- Fitted with handles and castors
Series: Subwoofers
INV#142960
- Direct radiating, long excursion 18” (460mm) driver
- High temperature 4” (100mm) voice coil
- High power 132dB continuous, 138dB peak
- Fitted with integral handles and castors
Series: Subwoofers
INV#142961
- Single 18" (460mm) ultra-long excursion high power drive unit
- Frequency response 35Hz-150Hz ± 3dB (-10dB @ 28Hz)
- 104dB 1W/1m
- Fast integral rigging system
- Compatable with W8LM and W8LMD line array elements
- Can be ground stacked or flown
- Socket for pole mounted W8LMD
Series: Line Array Systems
INV#142987
- Single 18" ultra-long excursion high power bass driver
- Sensitivity 106dB 1W@1M
- Maximum SPL 142dB peak
- Frequency response 35Hz-150Hz ±3dB, -10dB @ 28Hz
- 8 ohm nominal impedance
- Fast, integral rigging system with variable splay angles
Series: Line Array Systems
INV#143018
- Hybrid® quad 8” (200mm) LF + MF configuration
- LF + MF - 102dB @ 2.83V, 1m (single cabinet)
- Quad 1” (25mm) HF, all horn loaded - 106dB @ 2.83V, 1m
- Max 131dB continuous, 137dB peak output
- Consistent 100° long throw, 120° short throw (-6dB) horizontal mid and HF pattern control
- 30° vertical differential directivity, VDQ
- Passive or bi-amp operation
- Optional yoke/spigot mount adaptor
- Compatible with WMX, WS18X and WS218X sub-woofers
Series: Differential Dispersion Series
INV#142963
- Mini, three-way line array element
- Hybrid™ dual 8”(200mm) LF+MF configuration
(-3dB @ 60Hz) - LF+MF – 100dB @ 1W, 1m (single cabinet)
- Twin 1” (25mm) HF horn – 106dB @ 1W, 1m (single cabinet)
- Consistent 100° (-6dB) horizontal mid and HF pattern control
- Passive or bi-amp operation
- 12 ohm system impedance, up to 4 cabinets on one amplifier channel
- Integral rigging system with variable splay angles
- 7:1 safety factor with arrays of up to 12 cabinets
- Compatible with W8LM flying frame and lifting bar
- Display™ array optimisation software
- Loudspeaker management preset files for a wide variety of configurations
Series: Install Line Array Systems
INV#142990
- Stand alone vertically arrayable enclosure
- Line array downfill element
- Consistent 120° (-6dB) horizontal mid and HF pattern control
- 20° (-6dB) Vertical dispersion
- Tripod mountable singularly or in pairs
- Amplitude shading switch
- Passive or Bi-Amp format
- Compatible with WMX, WLX, WSX, WS2A & WS218X
Series: Install Line Array Systems
INV#142989
- Compact, high performance three-way line array enclosure
- High power – maximum SPL 129dB continuous, 135dB peak (single unit)
- Superior bass impact – all horn design
- Wide bandwidth – 60Hz – 18kHz ± 3dB (single unit)
Very smooth off-axis response – useable out to 120° (-10dB)- ViewPoint™ array optimisation software
- Loudspeaker management preset files for a wide variety of configurations
- Compatible with WLX, WSX and WS218X
Series: Install Line Array Systems
INV#143022
- Stand-alone vertically arrayable enclosure
- Line array downfill element
- Consistent 120° (-6dB) horizontal mid and HF pattern control
- 20° (-6dB) vertical dispersion
- Amplitude shading switch
- 7:1 safety factor with arrays of up to 6 cabinets
- ViewPoint™ array optimisation software
- Loudspeaker management preset files for a wide variety of configurations
- Compatible with WLX, WSX and WS218
Series: Install Line Array Systems
INV#143021