Category:
Series:
IDI-WM01-PW
NEXO IDI-WM01-PW- Wall mount for a single ID24i - install model, in
- Horizontal position. The bracket allows up to
- 30deg of downtilt. White version
Series: ID Series Accessories
INV#197903
IDS210-E
NEXO IDS210-E- Dual 10" low pro le subwoofer, 11.25" H, 41.3"
- W 21.7" D. Nominal 2 impedance producing 131dB
- Peak output when powered w/up to 1,300W. No
Series: ID Series Subwoofers
INV#197896
ID24-L12040-PW
NEXO ID24-l12040PW- Install version w/a rotatable 120deg x 40deg HF
- Horn, white paint.
Series: ID Series
INV#197916
ID24-T12060
NEXO ID24-T12060- Tour version w/a rotatable 120deg x 60deg HF horn.
Series: ID Series
INV#197911
IDT-GSTK
NEXO IDT-GSTK- Ground stack or lip ll bracket w/adjustable
- Tilt of approximately +/- 10deg.
Series: ID Series Accessories
INV#197902
VNI-WS15-PW
NEXO VNI-WS15-PW- Wall mounted hanging bracket for PS15-R2, white
- Painted finish
Series: PS R2 Series Accessories
INV#75185
VNI-LBRK
NEXO VNI-LBRK- Fixed install L bracket for GEO S12, PS10-R2,
- PS15-R2, or LS600
Series: PS R2 Series Accessories
INV#75261
GMT-LBUMP-PW
NEXO GMT-LBUMP-PW- Production/installation light bumper for up to 3
- GEO M6 cabinets, white painted nish
Series: GEO M6 Series Accessories
INV#197925
DTD-IN
NEXO DTD-IN- Install version w/Euroblock connectors. Built-in
- Two-channel Dante network interface
Series: PS R2 SERIES
INV#197893
ID24-I12040
NEXO ID24-I12040- Install version w/a rotatable 120deg x 4deg HF
- Horn.
Series: ID Series
INV#197920
LS18
NEXO LS18- High power sub-bass with a 4" voice coil 18"
- Driver. Operational from 40Hz-120Hz +-3dB, peak
- SPL 140dB. For use with PS15 R2 and GEOS12, flyabl
Series: LS18 Series
INV#163126
NXDT104
NEXO NXDT104- Optional digital input card using DANTE network
- Connection, configurable for daisy chain or
- Redundant network configurations, 3 x RJ45 ports;
Series: NXAMP Series
INV#163100
NXDPU
NEXO NXDPU- Digital output patching unit for NXAMP, 4 x NL4
- And 2 x NL8 connectors, communicates with NXAMP
- And configures connectors based on NXAMP setup
Series: NEXO POWER AMPLIFIERS
INV#163104
NXDMU
NEXO NXDMU- Digital input/metering unit for NXAMP, 4 x XLR
- Inputs with metering and loop-thrus, 3 x RJ45
- Network inputs with network activity LED's and
Series: NEXO POWER AMPLIFIERS
INV#163105
NXAMP4X4
4 x 4000W Powered TDcontroller- Cost-effective integration of command and control, protection and amplification of all NEXO loudspeaker systems
- Lighter, requiring less rack space than conventional amplifier-processor systems
- Eliminates unnecessary A/D conversion
- Optional EtherSound Networking
Series: NXAMP Series
INV#58578
NXAMP4X1
4 x 1200W Powered TDcontroller- Cost-effective integration of command and control, protection and amplification of all NEXO loudspeaker systems
- Lighter, requiring less rack space than conventional amplifier-processor systems
- Eliminates unnecessary A/D conversion
- Optional EtherSound Networking
Series: NXAMP Series
INV#58580
NXAE104
NEXO NXAE104- Optional digital input card using AES-3 format. 2
- X XLR-F inputs and 1 x XLR-M for AES
- Pass-through. 2 x RJ45 ports for monitoring and
Series: NEXO POWER AMPLIFIERS
INV#197894
NX242-ES4
NEXO NX242-ES4- Precision proprietary digital system controller
- For all Nexo systems that maintains exceptional 6
- Performance and reliability by providing
Series: NEXO SIGNAL PROCESSORS
INV#58577
NAT-UNI
NEXO NAT-UNI- 14U rack with wheel board, flyable with optional
- Bumper, pocket doors, front and rear rails
Series: NEXO POWER AMPLIFIERS
INV#163106
NAT-NBUMPER
NEXO NAT-NBUMPER- Single point bumper for ying NUAR racks. For
- Use w/up to three NUAR racks maximum
Series: STM Rigging Accessories
INV#197866
NAT-HAND4X4
NEXO NAT-HAND4X4- Optional handle set for the NXAMP4X4
Series: NXAMP Series Accessories
INV#75223
NAT-HAND4X1
NEXO NAT-HAND4X1- Optional handle set for the NXAMP4X1
Series: NXAMP Series Accessories
INV#75222
NAI48-ES
YAMAHA NAI48-ES- Audio network interface: Converts 48 channels of
- AES3 to EtherSound and vice versa for convenient
- Stagebox connection. 1U Rackspace, 9-pin port for
Series: Ethersound Interfaces
INV#75098
LST-XBOW18
NEXO LST-XBOW18- Rigging plates for LS18 touring applications (pair
Series: LS18 Accessories
INV#163121
LS600-SUB-PW
NEXO LS600-SUB-PW- Same as above with white painted finish
Series: PS R2 SERIES
INV#102596
- High-power system (138dB Peak SPL @ 1m) with 15in VLF long excursion driver.
- VLF extension (to 38Hz) of PS10-R2 Loudspeakers
- Sophisticated control electronics ensure reliable, linear operation
- Integral pole mount that supports one or two PS10-R2 Loudspeakers
Series: PS R2 SERIES
INV#57096
LS400-SUB-PW
NEXO LS400-SUB-PW- Same as above with white painted finish
Series: PS R2 SERIES
INV#102595
- High-power system (131dB Peak SPL @ 1m) with 12in VLF low magnetic emission Neodymium driver for light weight (14.6kg, 32lbs) and negligible magnetic leakage.
- VLF extension (to 40Hz) of PS8 Loudspeakers. Sophisticated control electronics ensure reliable, linear operation.
- Integral pole mount that supports one or two PS8 Loudspeakers.
Series: PS R2 SERIES
INV#49605
LS18-E
NEXO LS18-E- 18" sub-bass for PS15 R2 and GEOS12. E version is
- Non-flyable, no handle, no pole stand
Series: LS18 Series
INV#163124
VXT-PLSTD
NEXO VXT-PLSTD- Mounting accessory for RS15, PS, and PS R2
- Series; mast pole
Series: RS15 Accessories
INV#75180
VXT-LIK-M
NEXO VXT-LIK-M- Laser/remote inclinometer kit. Includes two
- Laser/sender units, one meter unit, and a
- Carrying case
Series: STM Accessories
INV#197887
VXT-CHBAG
NEXO VXT-CHBAG- GEOSUB chain bag for levalift chain hoists
Series: GEOSUB Accessories
INV#75240
VXT-BRIDLE23
NEXO VXT-BRIDLE23- For single point rigging of STM clusters. 2-leg
- Bridle, 3-ton rating. Requires two STT PTILTs
- Connected to STT-MBEAM or STT-XBOW
Series: STM Accessories
INV#197888
VXT-BRIDLE2
NEXO VXT-BRIDLE2- Two leg chain bridle for Single Point Rigging
- Mode (one adjustable leg)
Series: GEO S8 Series Accessories
INV#75292
VXT-BLTRAP
NEXO VXT-BLTRAP- T-RAP (Lanyard) for VXT-BL1020 quick release pin
Series: GEOSUB Accessories
INV#75287