Compare:
- 4 XLR Inputs with Level controls & Sig/OL indicators
- Select Mic, Mic with 48V phantom, or Line level.
- Two Aux Inputs: dual RCA & 3.5 mm, independently monoed
- USB Audio Input (16-bit, 48 kHz)
- USB Charge Port for iPod or other USB-powered devices
- Power, Locate, USB, Fault, and RAD status indicators
- Dual RCA Record out's
- Pre-Output Headphone ¼" and 3.5 mm with Level control
- USB Audio Output (16-bit, 48 kHz)
- Rane RAD and Cascade In RJ-45 Ports
- Cascade In Port connects up to seven Rane AM2 Automixers
- RAD Port sends Output to either HAL (DSP/control) or Mongoose (CobraNet)
Compare:
- 8 XLR Inputs with Level controls & Sig/OL indicators
- Select Mic, Mic with 48V phantom, or Line level
- XLR Main outputs with Mic/Line switch, Level control & Sig/OL
- Rane RAD and Cascade IN RJ-45 Ports
- Cascade In Port connects up to seven Rane AM2 Automixers
- RAD Port sends Output to either HAL (DSP/control) or Mongoose (CobraNet)
Compare:
SCM820-DAN-DB25 - 8-Channel Digital IntelliMix Automatic Mixer with DB25 Connectors and Dante Digital Audio
- Delivers seamless automatic mixing and reduced background noise through dynamic channel gating and attenuation
- Multi-channel audio networking over Ethernet
- Dante virtual soundcard license included to connect a computer to a Dante network for recording, playback, and internet calling between Dante-equipped devices
- Link Dante-equipped SCM820 mixers to form large automixes of up to 12 units (96 channels of audio)
- Control system compatible (AMX, Crestron)
- NAT (Noise Adaptive Threshold) continuously adjusts the activation threshold for opening a channel
- Number of Open Microphones Attenuation (NOMA) determines the amount of gain attenuation for a mix output when the number of active microphones changes
- Last Mic Lock-On (LMLO) keeps the most recently activated microphone open until another microphone is activated
- MaxBus ensures that only one channel is opened per sound source, reducing comb filtering for clear and intelligible speech
- IntelliMix Modes offer five different mixer mode presets of reliable automixing styles (Classic, Smooth, Extreme, Custom, or Manual) to quickly tailor the mix for a particular application
- Per-channel direct outputs allow the SCM820 to be used as an insert processor
- Mix A and B outputs with selectable mic or line level connect to a sound reinforcement system, mixing console, or recording device
- Dual mixer operation enables routing of independent automixes to the mix A and B outputs, allowing two entirely different mixes to result from the same set of inputs
- Aux inputs on both the front and back panel easily connect to media players
- ¼" (6.35 mm) stereo headphone output for channel solo and mix monitoring
- Channel control knobs allow quick adjustment of gain, limiter, and EQ settings, and solo/mute functions on input channels
- Output mix controls and meters enable front-panel master gain and limiter control as well as signal monitoring
- LED meter rings display input audio or IntelliMix gain levels for each channel
- Browser-based control software delivers comprehensive software control, monitoring, routing, and configuration of all signals and settings and adds a parametric 8-band EQ
Compare:
- Delivers seamless automatic mixing and reduced background noise through dynamic channel gating and attenuation
- Control system compatible (AMX, Crestron)
- NAT (Noise Adaptive Threshold) continuously adjusts the activation threshold for opening a channel
- Number of Open Microphones Attenuation (NOMA) determines the amount of gain attenuation for a mix output when the number of active microphones changes
- Last Mic Lock-On (LMLO) keeps the most recently activated microphone open until another microphone is activated
- MaxBus ensures that only one channel is opened per sound source, reducing comb filtering for clear and intelligible speech
- IntelliMix Modes offer five different mixer mode presets of reliable automixing styles (Classic, Smooth, Extreme, Custom, or Manual) to quickly tailor the mix for a particular application
- Per-channel direct outputs allow the SCM820 to be used as an insert processor
- Mix A and B outputs with selectable mic or line level connect to a sound reinforcement system, mixing console, or recording device
- Dual mixer operation enables routing of independent automixes to the mix A and B outputs, allowing two entirely different mixes to result from the same set of inputs
- Aux inputs on both the front and back panel easily connect to media players
- ¼" (6.35 mm) stereo headphone output for channel solo and mix monitoring
- Channel control knobs allow quick adjustment of gain, limiter, and EQ settings, and solo/mute functions on input channels
- Output mix controls and meters enable front-panel master gain and limiter control as well as signal monitoring
- LED meter rings display input audio or IntelliMix gain levels for each channel
- Browser-based control software delivers comprehensive software control, monitoring, routing, and configuration of all signals and settings and adds a parametric 8-band EQ
Compare:
- Delivers seamless automatic mixing and reduced background noise through dynamic channel gating and attenuation
- Control system compatible (AMX, Crestron)
- NAT (Noise Adaptive Threshold) continuously adjusts the activation threshold for opening a channel
- Number of Open Microphones Attenuation (NOMA) determines the amount of gain attenuation for a mix output when the number of active microphones changes
- Last Mic Lock-On (LMLO) keeps the most recently activated microphone open until another microphone is activated
- MaxBus ensures that only one channel is opened per sound source, reducing comb filtering for clear and intelligible speech
- IntelliMix Modes offer five different mixer mode presets of reliable automixing styles (Classic, Smooth, Extreme, Custom, or Manual) to quickly tailor the mix for a particular application
- Per-channel direct outputs allow the SCM820 to be used as an insert processor
- Mix A and B outputs with selectable mic or line level connect to a sound reinforcement system, mixing console, or recording device
- Dual mixer operation enables routing of independent automixes to the mix A and B outputs, allowing two entirely different mixes to result from the same set of inputs
- Aux inputs on both the front and back panel easily connect to media players
- ¼" (6.35 mm) stereo headphone output for channel solo and mix monitoring
- Channel control knobs allow quick adjustment of gain, limiter, and EQ settings, and solo/mute functions on input channels
- Output mix controls and meters enable front-panel master gain and limiter control as well as signal monitoring
- LED meter rings display input audio or IntelliMix gain levels for each channel
- Browser-based control software delivers comprehensive software control, monitoring, routing, and configuration of all signals and settings and adds a parametric 8-band EQ
Compare:
- Delivers seamless automatic mixing and reduced background noise through dynamic channel gating and attenuation
- Multi-channel audio networking over Ethernet
- Dante virtual soundcard license included to connect a computer to a Dante network for recording, playback, and internet calling between Dante-equipped devices
- Link Dante-equipped SCM820 mixers to form large automixes of up to 12 units (96 channels of audio)
- Control system compatible (AMX, Crestron)
- NAT (Noise Adaptive Threshold) continuously adjusts the activation threshold for opening a channel
- Number of Open Microphones Attenuation (NOMA) determines the amount of gain attenuation for a mix output when the number of active microphones changes
- Last Mic Lock-On (LMLO) keeps the most recently activated microphone open until another microphone is activated
- MaxBus ensures that only one channel is opened per sound source, reducing comb filtering for clear and intelligible speech
- IntelliMix Modes offer five different mixer mode presets of reliable automixing styles (Classic, Smooth, Extreme, Custom, or Manual) to quickly tailor the mix for a particular application
- Per-channel direct outputs allow the SCM820 to be used as an insert processor
- Mix A and B outputs with selectable mic or line level connect to a sound reinforcement system, mixing console, or recording device
- Dual mixer operation enables routing of independent automixes to the mix A and B outputs, allowing two entirely different mixes to result from the same set of inputs
- Aux inputs on both the front and back panel easily connect to media players
- ¼" (6.35 mm) stereo headphone output for channel solo and mix monitoring
- Channel control knobs allow quick adjustment of gain, limiter, and EQ settings, and solo/mute functions on input channels
- Output mix controls and meters enable front-panel master gain and limiter control as well as signal monitoring
- LED meter rings display input audio or IntelliMix gain levels for each channel
- Browser-based control software delivers comprehensive software control, monitoring, routing, and configuration of all signals and settings and adds a parametric 8-band EQ
