Compare:
- Dual 31-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12dB
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inpts and Outputs
- Frequency Repsonse of <10Hz to >50kHz
- Dynamic range of greater than 108dB
Compare:
- Single 31-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12dB
- 12dB per octave, 3dB down @ 50Hz low-cut filter
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inputs and Outputs
- Frequency Repsonse of <10Hz to >50kHz
- Dynamic range of greater than 108dB
Compare:
- Dual 15-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12dB
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inpts and Outputs
- Frequency Repsonse of <10Hz to >50kHz
- Dynamic range of greater than 108dB
Compare:
- Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
- Patent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
- Four segment LED bargraph for BOTH Gain Reduction AND Output Level
- Status LEDs offer visual feedback for all settings on the front panel
Compare:
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced outputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
Compare:
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
Compare:
- 1% Tolerance Components for Precise Filter Accuracy
- Precision Wein-bridge filters
- Constant "Q" design
- Switchable Boost/Cut Range of ±6 or ±15 dB
- 25mm, Detented Metal Shaft Faders
- 18dB/Octave High Pass Filters
- Balanced Inputs
- Servo-balanced Outputs
- XLR, TRS and Euroblock Connections
- Universal 100-240VAC Internal Power Supply
- Rider friendly
- Safety/Compliance: cTUVus, FCC, CE, RoHS
Compare:
GQX-3102 - 2-Channel 31-Band Equalizer
- 1% Tolerance Components for Precise Filter Accuracy
- Precision Wein-bridge filters
- Constant "Q" design
- Switchable Boost/Cut Range of ±6 or ±15 dB
- 45mm, Detented Metal Shaft Faders
- 12dB/Octave, 40Hz High Pass Filter
- 10 position, 2-color LED level meter
- Peak LED indicators
- Balanced Inputs
- Servo-balanced Outputs
- XLR, TRS and Euroblock Connections
- Universal 100-240VAC Internal Power Supply
- Rider friendly
- Safety/Compliance: cTUVus, FCC, CE, RoHS
Compare:
- Advanced Feedback Suppression (AFS™)
- Type V™ Noise Reduction
- PeakStopPlus® Limiting
- 2/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of +6 or +15dB
- 18 dB per octave 40Hz low-cut filter
- +12dB input gain range
- XLR, TRS and Euroblock Inputs and Outputs
- Internal Toroidal Transformer
- Frequency Response of 10Hz to 22kHz
- Dynamic range of greater than 113dB
- User Power Up Features
- Relay Bypass for Power Failure System Protection
Compare:
- Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
- Patent-pending PeakPlus® Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
- An extremely high quality EQ, patent-pending Type III Noise Reduciton, and the elegant new PeakPlus Limiter all in one great sounding box
- Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
- Status LEDs offer visual feedback for all settings on the front panel
Compare:
- Advanced Feedback Suppression (AFS™)
- Type V™ Noise Reduction
- PeakStopPlus® Limiting
- 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of +6 or +15dB
- 18 dB per octave 40Hz low-cut filter
- +12dB input gain range
- XLR, TRS and Euroblock Inputs and Outputs
- Internal Toroidal Transformer
- Frequency Response of 10Hz to 22kHz
- Dynamic range of greater than 113dB
- User Power Up Features
- Relay Bypass for Power Failure System Protection
Compare:
- Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
- Patent-pending PeakPlus® Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
- An extremely high quality EQ, patent-pending Type III Noise Reduciton, and the elegant new PeakPlus Limiter all in one great sounding box
- Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
- Status LEDs offer visual feedback for all settings on the front panel
Compare:
- 45mm faders with integral dust guards
- Signal present & Clip LEDs
- Universal Power Supply
- Fully balanced inputs & Outputs
- Relay activated bypass
- Roadworthy 3U steel chassis
- PROportional Q filters
- High Pass Filters
- Low Pass Filters
Compare:
- Two x thirty 30mm oil damped precision faders graphically positioned at 1/3 octave ISO frequencies between 25Hz-20kHz
- Proprietary circuit designs utilising "MELT" filters giving unbeatable performance
- Comprehensive standard specifications include electronically balanced inputs and LED overload indicators
- Earth lift switch enables signal and chassis grounds to be isolated eliminating ground-loop problems
- Useful low cut 18dB/octave filters preventing subsonic components from overloading speakers or amplifiers
- Equalisation by-pass allowing easy comparison between direct and equalised signals
- Scale switching gives the choice of either high fader resolution (±6dB) or normal (±12dB)
- Perspex security cover available to order, for use in permanent sound installations where system calibration has taken place
Compare:
- Selectable ±6 dB or ±12 dB EQ ranges offer extra control versatility
- Variable High Pass Filters
- Balanced Input and Output
