Audix, On Stage With Audix
TMPproFinal
AKG DMS700 V2
Compare:
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Replacement cartridge: R57
TMP Item
#6224
List: $124.00
MAP: $99.00
Compare:
DMK57-52 - Shure Drum Microphone Kit
- Three SM57 microphones
- One Beta 52A lick drum microphone
- Three A56D drum mounts
- Carrying case included
TMP Item
#6328
List: $536.00
MAP: $399.00
Compare:
PG57-XLR - PG Series Instrument Microphone
- Tailored frequency response is smooth and extended. Tuned specifically for instrument applications.
- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
- Cartridge includes a neodymium magnet for high output level.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- On/off switch for onstage control.
- Hardened steel mesh tapered grille that resists wear and abuse.
- Includes a 15 ft (
TMP Item
#6297
List: $74.00
MAP: $59.00
Compare:
- Uniform supercardioid pattern with high gain-before-feedback
- Neodymium magnet for high signal-to-noise ratio
- Advanced pneumatic shock mount system
- Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
- Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
- Minimally affected by varying load impedance
- Shure quality and
TMP Item
#9149
List: $174.00
MAP: $139.00
Compare:
- Volume control knob allows users to adjust the volume to fit each musical situation
- Rugged, dynamic cartridge with improved response
- High-impedance, omnidirectional
- Supplied with 1/4 inch connector
- Frequency response 100 to 5,000 Hz
TMP Item
#6252
List: $149.00
MAP: $119.00
Compare:
- Plug and Play USB Connectivity allows the convenience of digital recording, anywhere your computer can go (compatible with Windows 7, Vista, XP, 2000, and Mac OS X 10.1 or later)
- Provides +48V Phantom power
- USB cable (3m / 9.8ft) included for immediate use
- Headphone jack with volume control for monitoring
- Integrated pre-amp with Microphone Gain Control allows control of input signal strength
- Monitor Mix Control for blending microphone and playback audio
- Zero Latency Monitoring for real-time playback and mul
TMP Item
#54250
List: $161.00
MAP: $99.00
Compare:
- Flat response curve for accurate reproduction of sound sources
- Low noise and high output clipping level
- Low distortion over a wide range of load impedances
- Cardioid polar pattern, uniform with frequency and symmetric about axis, providing maximum rejection and minimum coloration of off-axis sounds
- Low RF susceptibility
- Selectable low-frequency response: flat, 6 or 18 dB/octave rolloff
- 0 dB/10 dB lockable att
TMP Item
#6228
List: $436.00
MAP: $349.00
Compare:
- Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
- Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.
- Powered by AA battery or phantom power supply.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- On/off switch for onstage control.
TMP Item
#29114
List: $161.00
MAP: $129.00
Compare:
- Frequency response shaped specifically for kick drums and bass instruments
- Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Studio quality performance, even at extremely high sound pressure levels
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high s
TMP Item
#9150
List: $236.00
MAP: $189.00
Compare:
- (3) Three PG56 snare/tom microphones
- (1) One PG52 kick drum microphone
- (2) Two PG81 instrument microphones
- (3) Three A50D drum mounts
- (6) Six 15ft (4.57m) XLR-XLR cables
- (1) One durable carrying case
TMP Item
#29353
List: $499.00
MAP: $399.00
Compare:
- Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutter
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Minimally affected by varying load impedance
- Advanced pneumatic shock mount system that minimizes transmission of
TMP Item
#34555
List: $199.00
MAP: $159.00
Compare:
- (3) PG56 compact drum microphones for close miking.
- (1) PG52 high-performance microphone tuned to capture low-end punch.
- (3) A50D drum mounts. Can be used on most standard drum rims. The flexible yet sturdy rubber construction provides stability and ease of installation.
- (4) 15ft. (4.57m) XLR-XLR cables.
- (1) Carrying case.
TMP Item
#6852
List: $311.00
MAP: $249.00
Compare:
- Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range
- Embossed, high-compliance diaphragm provides extended low-frequency response
- Ultra-thin, gold-layered, low-mass, Mylar® diaphragm for excellent transient response
- 16 dB attenuation switch for handling extremely high sound pressure levels (SPL)
- Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect
- Integrated three-stage pop protection grille reduces
TMP Item
#62360
List: $686.00
MAP: $549.00
Compare:
- Ultra-thin diaphragm for smooth high end and tight, controlled low end
- 15dB pad for performance consistency across a wider range of high SPL sources
- Low self-noise and transformerless preamplifier circuitry
TMP Item
#54594
List: $224.00
MAP: $179.00
Compare:
- Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control
- Ships with A98D drum mount featuring a flexible gooseneck for precise placement and secure attachment
- Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments
- Precision-engineered design for unobtrusive microphone footprint
TMP Item
#75639
List: $286.00
MAP: $229.00
Compare:
KSM137/SL - KSM Series Instrument Microphone
- Extended frequency response
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- Highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response,
TMP Item
#29741
List: $374.00
MAP: $299.00
Compare:
- Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control
- Ships with RK282 shock mount swivel adapter for attachment to any standard microphone stand
- Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments
- Precision-engineered design for unobtrusive microphone footprint
TMP Item
#75637
List: $249.00
MAP: $199.00
Compare:
- Uniform cardioid pattern
- Selectable dual-impedance operation
- Lockable on/off switch
TMP Item
#6258
List: $122.00
MAP: $0.00
Compare:
- Flat, neutral frequency response for natural reproduction on stage or in the studio
- 15dB pad for performance consistency across a wider range of high SPL sources
- Superior transient response from a low-mass large Mylar® diaphragm
- Uniform cardioid pattern for superior off axis rejection
- 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
- Durable metal construction
- Three separate mesh layer
TMP Item
#55365
List: $374.00
MAP: $299.00
Compare:
PG52-XLR - PG Series Kick Drum Microphone
- Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications.
- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
- Cartridge includes a neodymium magnet for high output level.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- Integral stand mount.
- Hardened steel mesh tapered grille that resists wear and abuse.
- Includes 15ft (4.57m) cable and
TMP Item
#29476
List: $149.00
MAP: $119.00
