Brand:

- AmpLink 24-channel digital audio transport.
- Quick-connect RJ-45 connections on shielded CAT 5 cable.
- Thru connection to daisy-chain up to 10 m between products.
- 3-position bank select switch chooses 8 consecutive AmpLink channels the amplifier will amplify.
- Each daisy-chained amplifier can choose either the same, or a different, bank of channels.
- AmpLink can daisy-chain up to 8 amplifiers.
- Any combination of AmpLink amplifiers can be daisy-chained.
- Bose Part # 772238-0110
INV#223393

- Frequency Response
- 1 7/8" (4.7625 cm)
- 1 5/8" (4.1275 cm)
- 1.00 lb (0.45 kgs)
INV#55948

- 1 1/2" (3.81 cm)
- 4" (10.16 cm)
- 4 1/2" (11.43 cm)
- Frequency Response
- 20Hz - 20kHz Flat
- Four Position Detachable Phoenix Connector
- 8 , 25V, 70.7V, 100V Systems
INV#56406

- Isolation Transformer 25V, 70V , and 100V dual
- Output transformer for CX302
INV#42448

- Set of 2 Aluminum Security Locking Knobs for KLR
- Front Panel Volume Controls
INV#192380

- In-line (brick) power supply. 15v, 3 amp. For
- SA202.
INV#158983

- Lo-Z/Hi-Z switchable compact Class-D ampli ers
- (Lo-Z: 30 watts x 2 channels; Hi-Z: 60 watts x 1
- Channel) Dedicated rack mount kit for MA2030 and
INV#175139
Call

- Amplifier controller for Tn, PC-1N, XP, XM, and
- XH amps. Controls up to 32 Tn and/or PC-1N amps
- Which can be connected to the Data Port connector
INV#74999
Call

- 70 volt amplifier transformer - Rackmount -
- 150w4R / 75w8R or 250w4R / 125w8R taps
INV#130836

- Rack-mount adaptor for SA202.
INV#100346

- 1 5/8" (4.1275 cm)
- 1 15/16" (4.92252 cm)
- 3/4" (1.905 cm)
INV#69857

- 1 potentiometer wired directly to VCA connectors
INV#51074

- Preconfigured System rack including three TGX20 DSP amplifiers, power distribution, input and output interfaces and network redundancy
- Power distribution mountable either on front or rear*
- Integrated rack sliding doors
- Stackable on a single dolly
INV#230766

- plug-in output transformer
INV#124287

- plug-in output transformer
INV#124286

- 300W transformer for 25/70/100V systems (MCA8150
- - bridged)
INV#152329

- 150W transformer for 25/70/100V systems (MCA 8150
- - per channel)
INV#152330

- 100W transformer for 25/70/100V systems (MCA 8050
- - bridged)
INV#152331

- 50W transformer for 25/70/100V systems (MCA 8050
- - per channel)
INV#152332

- Dante Enabled Accessory Card for Use with
- DPA2402/DPA1202/DPA602
INV#193604

- Analog Mixer Accessory Card for Use with
- DPA2402/DPA1202/DPA602
INV#193605

- 5 3/16" (13.1064 cm)
- 19" (48.26 cm)
- 5.00 lbs (2.27 kgs)
INV#69895

- Dante Enabled Accessory Card for Use with HPA
- Amplifiers
INV#193568

- 3/8" (0.87376 cm)
- 1 1/16" (2.61874 cm)
- 0.50 lbs (0.23 kgs)
INV#59961