Brand:

- Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
- Switch-mode universal power supply
- Intuitive front-panel LCD screen for quick, easy configuration
- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
- Up to 20 user defined DSP presets are available
INV#40060

- Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
- Switch-mode universal power supply
- Intuitive front-panel LCD screen for quick, easy configuration
- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
- Up to 20 user defined DSP presets are available
INV#40573

- Contractor power amplifier/ 2 channel, 200
- Watts/ch at 8ohm, 300 watts/ch at 4ohm, 70V/mono
- At 600 Watts.
INV#137365

- Up to 60 watts per channel into 4 and 8 ohms
- ENERGY STAR® qualified amplifier
- Bridgeable outputs for higher power
- 1Auto-Ramp provides quiet startup and power-down
- Rack-mountable 1U, half rack width enclosure
INV#115785

- Flexible Amplifier Summing Technology™ (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three or all four channels
- Includes 70V and 100V direct drive capability
- Full function onboard loudspeaker processing DSP with Crossover and Parametric EQ Filters, Limiting and Alignment Delay eliminate the need for outboard loudspeaker processors
- PowerLight universal switchmode power supply with PFC for highest effiency, improved audio performance, and low heat dissipation
- Preset Wizard simplifies amplifier setup providing system design tools and loudspeaker selection from a list of speakers
- Powerful Intrinsic Correction™ processing maximizes the sonic performance of QSC loudspeakers
- 20 Factory Preset configurations that can be modified and stored in the 50 User Presets
- Integrated front panel with channel Select and Mute buttons, Input and Output LED Metering, 400x240 LCD, intuitive navigation buttons, LED power button and indicator, and cast aluminum handles
- GPIO for additional functionality including a heartbeat output for Life-Safety supervision
- Four Input Phoenix connectors, and four Phoenix touch-proof Speaker
INV#154445

- 2 x 50 watt class D amplifier. Three operating
- modes: stereo, dual mono, or bridged mono. Three
- user selectable inputs: balanced stereo
INV#126974

- 25, 70, 100 volt, and low-impedance outputs available simultaneously
- Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings
- XLR and detachable Euro style input connectors
- DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
- Independent defeatable clip limiters for reduced distortion
- Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material
- Front panel indicators include power, signal, and clip (and protect on ISA 1350)
- Covered barrier strip output connectors for safety agency compliance
- Automatic variable-speed fan for quiet normal operation with maximum cooling on demand
- Rear-to-front air flow keeps equipment racks cool
- Stereo, Bridge, or Parallel operating modes
- Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
- 3-year warranty plus optional 3-year extended service contract
INV#36087

- 70 volt direct model
- 2 RU and 14" deep for reduced rack cost and floor space
- Channels 1&2 and 3&4 bridgeable for maximum flexibility
- Active Inrush Limiting eliminates AC inrush current, removing the need for expensive power sequencers
- HD15 DataPort connector for Q-Sys and QSControl computer control and monitoring
- Custom integrated security cover for tamper-proof installations
- Variable speed fan for low noise
- 1 dB detented gain controls for fast and accurate gain settings
- Detachable Euro style input connectors
- DIP switch control for clip limiters, high pass filters, bridge mono and parallel operation
- Exclusive PowerLight switch-mode power supply technology for high performance and compact size
- Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material
- Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
- Barrier strip output connector
- Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
- High-performance Class AB+B complementary bipolar output circuitry
- 21 pounds (9.5 kg) for easier racking and shipping
- 3-year warranty plus optional 3-year extended service contract
INV#17844

- One Balanced Line Input
- One Unbalanced, Summing Line Level Input
- Global Power Supply, 100VAC-240VAC ~ 50/60Hz
- Compact 1RU, 1/2 Rack
INV#80325

- Flexible Amplifier Summing Technology™ (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three or all four channels
- Includes 70V and 100V direct drive capability
- Full function onboard loudspeaker processing DSP with Crossover and Parametric EQ Filters, Limiting and Alignment Delay eliminate the need for outboard loudspeaker processors
- PowerLight universal switchmode power supply with PFC for highest effiency, improved audio performance, and low heat dissipation
- Preset Wizard simplifies amplifier setup providing system design tools and loudspeaker selection from a list of speakers
- Powerful Intrinsic Correction™ processing maximizes the sonic performance of QSC loudspeakers
- 20 Factory Preset configurations that can be modified and stored in the 50 User Presets
- Integrated front panel with channel Select and Mute buttons, Input and Output LED Metering, 400x240 LCD, intuitive navigation buttons, LED power button and indicator, and cast aluminum handles
- GPIO for additional functionality including a heartbeat output for Life-Safety supervision
- Four Input Phoenix connectors, and four Phoenix touch-proof Speaker
INV#154444

- 2 x 40 watt channels
- Built-in 70V and 100V
- Universal power supply
- Fanless, space-saving 1U design
- Sleep mode disable function
- Energy-efficient amplifier
- Sleek industrial look with illuminated rings making knobs easy to see and use
- Supports the JBL CSR-V wall controller via Ethernet cable
- Energy Star® Certified
INV#163092

- Convection cooling
- Extremely low noise
- Internally Mounted Constant Voltage Transformers
- Switchable 120V/240V power supply (internal)
- Extensive protection circuitry
- Rear panel level attenuators for each channel
- 6-Step Signal Level and Clip LEDs
- Euroblock inputs/outputs
- Selectable input sensitivity
- Remote power turn-on/off
- Adjustable turn-on delay up to eight seconds
- Safety/Compliance: cTUVus, FCC, CE, RoHS
INV#55608

- Contractor power amplifier/ 2 channel, 500
- Watts/ch at 8ohm, 800 watts/ch at 4ohm, 70V/mono
- At 2000 Watts.
INV#137367

- Up to 60 watts per channel into 4 and 8 ohms
- ENERGY STAR® qualified amplifier
- Bridgeable outputs for higher power
- 1Auto-Ramp provides quiet startup and power-down
- Rack-mountable 1U, half rack width enclosure
INV#115786

- Flexible Amplifier Summing Technology™ (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three or all four channels
- Full function onboard loudspeaker processing DSP with Crossover and Parametric EQ Filters, Limiting and Alignment Delay eliminate the need for outboard loudspeaker processors
- PowerLight universal switchmode power supply with PFC for highest effiency, improved audio performance, and low heat dissipation
- Preset Wizard simplifies amplifier setup providing system design tools and loudspeaker selection from a list of speakers
- Powerful Intrinsic Correction™ processing maximizes the sonic performance of QSC loudspeakers
- 20 Factory Preset configurations that can be modified and stored in the 50 User Presets
- Integrated front panel with channel Select and Mute buttons, Input and Output LED Metering, 400x240 LCD, intuitive navigation buttons, LED power button and indicator, and cast aluminum handles
- GPIO for additional functionality including a heartbeat output for Life-Safety supervision
- Four Input Phoenix connectors, and four Phoenix touch-proof Speaker
INV#154446

- 2 x 600 watts channels
- Low Z and 70 volt modes
- Analog amplifier
INV#158268

- Plastic speaker enclosure, 100 watt, 8" spkr
- W/tweeter, wall mount U-bracket with knobs, 2x
- Plus screw terminal inputs
INV#130844

- Tailored to installation applications
- Exclusive VPL™ (Voltage Peak Limiter) matches channel output to load
- Bridgeable in channel pairs
- Network monitoring and control via NomadLink® and DeviceControl software (NLB 60E required)
- Low-Z (2-16 ohms) or High-Z (70 V or 100 V) output selectable per channel
- Selectable input gain
INV#59526

- 70 volt direct model
- Exclusive PowerLight switch-mode power supply technology for high performance and compact size
- Custom integrated security cover for tamper proof installations
- Variable speed fan for low noise
- 1 dB detented gain controls for fast and accurate gain settings
- Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
- XLR and detachable Euro style input connectors
- HD15 DataPort connector for Q-Sys and QSControl computer control and monitoring
- Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation
- Selectable high pass filters protect speakers and prevent speaker transformer saturation withminimal effect on program material
- Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
- Barrier strip output connector
- Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
- 2 rack units high and 14" deep for reduced rack cost and floor space
- 21 pounds (9.5 kg) for easier racking and shipping
- 3-year warranty plus optional 3-year extended service contract
INV#17846

- 25, 70, 100 volt, and low-impedance outputs available simultaneously
- Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings
- XLR and detachable Euro style input connectors
- DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
- Independent defeatable clip limiters for reduced distortion
- Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material
- Front panel indicators include power, signal, and clip (and protect on ISA 1350)
- Covered barrier strip output connectors for safety agency compliance
- Automatic variable-speed fan for quiet normal operation with maximum cooling on demand
- Rear-to-front air flow keeps equipment racks cool
- Stereo, Bridge, or Parallel operating modes
- Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
- 3-year warranty plus optional 3-year extended service contract
INV#29781

- Single-space 19-inch rackmount servo controlled power amplifier
- 60 watts per side at 4 ohms stereo
- 120 watts at 8 ohms (bridged mono)
- 1/4-inch balanced phone jack and RCA inputs
- Bi-polar design and toroidal transformer power supply
- Individual left and right level controls
- 10-segment, 3-color LED meters
- Convection-cooled design
- Headphone jack with speaker output mute
INV#17072

- Digital Mini Amplifier, 40 Watt, microphone
- Mixer/EQ, 2 x 20W as the default amplifier
- Output, bridge connection function, microphone
INV#173875

- Contractor power amplifier/ 2 channel, 300
- Watts/ch at 8ohm, 500 watts/ch at 4ohm, 70V/mono
- At 1200 Watts.
INV#137366

- Web Browser-based UI – works on any device with no software to download
- Direct LoZ and HiZ (70V or 100V) selectable per channel
- Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel
- 3 Ways to Connect 1.) Built in WiFi Access Point 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection
INV#247638

- Massive Power supply for high-quality, reliable sound
- All inputs and outputs on removable Euro-block connections for easier installation
- Power outputs available at 4 Ohm, 25V&70V for more system flexibility
- Remote Volume port allows wall panel control of level
- Dedicated Bass&Treble controls (recessed on front panel) allow independent adjustment for main or remote zones
- Line Input level selectable between 0dB&+4dB
- Summing RCA input also provided
- Bridging line output allows signal to be “daisy-chained” from one BA-200 unit to another, giving the capability of multiple zones with separate EQ&Level
- Input Signal present, Peak&Power On indicators on front panel
- Supplied security cap (YA-920 x 1) for volume knob to prevent unauthorized adjustment
- Thermal and overload protection
- Optional Rack-mount kits for single unit (MB-25B-BK), or dual (MB-25B-J)
- UL/CUL Approved
- 5 Year Warranty
INV#61958

- 1 3/4" (4.445 cm)
- 0.77 lbs (0.35 kgs)
INV#70084

- 6 Coax ceiling speaker 70/100 volt,
- 7.5w/15w/30w/60w/8R (bypass) taps, Sealed plastic
- Enclosure, clip mounting - white
INV#130846

- 150 watts per side at 4 ohms
- 300 watts bridged mono at 8 ohms
- 1/4-inch and RCA input connectors
- 5-way binding post and 1/4-inch outputs
- Dual Rack Space Design
- 10-segment, 3-color Level LED meters
- 4-stage power protection circuitry
INV#38482

- Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
- Switch-mode universal power supply
- Intuitive front-panel LCD screen for quick, easy configuration
- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
- Up to 20 user defined DSP presets are available
INV#48485