JBL Vertec
Community COntinental Airshow
Audix Theatrical Performance
Compare:
- 16-channel stereo mixer with fully adjustable pan per channel
- Sixteen Preset locations for storing custom mixes
- Channel solo, mute, and group functions
- Global trim for reducing all channel volumes
- Intuitive interface with no menus or screens to navigate
- Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount
Compare:
- One A-Net input, eight powered A-Net outputs
- A-Net Thru for system expansion (unpowered A-Net output)
- Isolated DC power supplies for eight A-Net Personal Mixers via the Cat-5e cable
- EtherCon connections throughout
- Multiple A-Net Distributors can be used in a system
Compare:
- One A-Net input, eight A-Net outputs
- Can insert DC power for up to eight A-Net devices into the Cat-5e cable
- 1/2-rack-space footprint - mounts easily on a standard rack shelf
- A-Net activity LEDs on the main input
- DC power indicator LEDs on each output jack
Compare:
- Sixteen high quality mic preamplifiers, with 24-bit A-to-D converters
- 48-volt phantom power on each channel
- XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
- Continuously variable gain, phase reverse, and 85Hz rolloff per channel
- Stereo Link switch per pair of channels
- Built-in passive mic splitter
- Balanced insert send and return jacks (1/4-inch TRS)
- Dual A-Net outputs
Compare:
- Advanced 36-channel mix engine
- Customizable channel selection and layout
- Per-channel volume, reverb, tone, Stereo Placement
- Dual Profile Channel
- One-Touch Ambience
- Four Instant Mix Recalls plus 16 standard presets
- Master Bass, Treble, and Enhance
- 1/4" and 1/8" Stereo Mix Out, plus XLR Mono Mix Out
- USB profile transfer
- Optimized for in-ear monitors and headphones
Compare:
- Sixteen balanced audio inputs (1/4-in TRS connectors)
- Sixteen balanced Thru connectors (TRS)
- A-Net Out and A-Net Expansion network connections (RJ45)
- Stereo Link switches for each channel pair
- Four-position gain switches (+22, +4, 0, -10dB)
- Signal present and clip LEDs per channel
Compare:
Aviom16/o-Y1 - Pro16 Series A-Net Output Card for Yamaha Consoles
- Mini-YGDAI (MY) format, supported by most Yamaha digital consoles
- One 16-channel A-Net output
- Supports sample rates from 44.1kHz to 48kHz, +/-10%
- Assign audio outputs directly from Yamaha interface
- Channel Link DIP switches for stereo operation
Compare:
- 16-Channel remote personal monitor control
- Wizard Set-up and configuration
- Courtesy Lexicon Reverb w/type and wet/dry control
- dbx PeakStop Limiting
- 16 Presets locations
- All inputs and outputs included
- USB - For firmware update
- LCD Screen
- Works on standard BLU link Bus
- Sturdy mic-stand mount built-in
- Works as 48kHz or 96kHz Switchable D/A Conversion
- Up to 60 units can be chained together with no loss of control or fidelity)
Compare:
- Up to 16 units can be used together in one BLU link ring
- Expandable up to 256 channels at 48 kHz channels (or 128 Channels atr 96 kHz)
- 16 dbx micpre analog inputs
- 16 analog outputs
- BLU link in/Out/Snake (Redundant output) via Cat5
- Signal present/ clip LEDs per channel
- +48v Phantom Power
- Mic Gain
- 20 db Pad
- Low Cut filter
- Polarity selection
- Dual 7-Segment Bank indicators (In/Out)
Compare:
- Remote-controllable sixteen-channel stereo mixer with fully adjustable pan per channel
- Dedicated Recall, Group, Solo, and Mute buttons
- Sixteen user Preset memory locations
- Master Volume, Treble, and Bass controls
- Balanced XLR and 1/4-inch TRS stereo outputs
- Balanced 1/4-inch TRS inserts and stereo Aux mix input
- MIDI control over mix and preset save/recall
- Remote control via A-Control with the A-16CS or via RS-232 with approved third-party control systems
Compare:
AN-16/o v.4 - Pro16 Series 16 Channel Output Module
- 16 balanced mic- or line-level outputs
- Four-position output level switch per channel pair
- Selectable +24, +18, and +4dBu line-level, or mic-level outputs
- 48kHz, 24-bit D/A converters
- Unlimited splits and digital copies
Compare:
AN-16SBR - Pro16 Series System Bridge
- Two identical 1U rack-mount modules
- (2x) Four Neutrik EtherCon connectors, labeled A, B, C, and D (16 channels each)
- (2x) One Neutrik EtherCon connector for Bridge output (up to 64 channels)
- Requires no power supply
- Multiple AN-16SBR units can be used to create complex systems
Compare:
- Provides robust protection to the Personal Mixer's case and connectors
- Attaches easily to any Personal Mixer
- 1/4-inch and 1/8-inch stereo headphone outputs
- XLR left/right line-level audio outputs (unbalanced)
- EtherCon® connector for A-Net In
- Requires MT-1 Mic Stand Mount
Compare:
- Control of all mix functions in the A-16R
- Dedicated Recall, Group, Solo, and Mute buttons
- Save and Recall of the 16 Presets in the A-16R
- Pan/Spread control with LED readout
- Channel volume control with LED readout
- Master Volume, Treble, and Bass controls
- Mounts easily on a mic stand with the optional MT-1 mic stand mount
Compare:
- Converts eight analog audio channels to a Pro16® A-Net digital stream
- ADAT® In and ADAT Out for cascading two AV-M8 modules
- Gain, +48V phantom power, and low cut filter controls per channel
- 20dB switchable pad (Channels 1 and 2)
- Stereo Link per channel pair
- Reversible mounting flanges and rack ears
Compare:
- Every performer in a studio or live sound setting can have a personalized mix without any adjustments at the board
- Perfect for use as a headphone system in the studio, plus drives powered monitors in live sound applications
- Provides each musician with five volume controls: four monaural (for mixer channels or busses), plus one for an overall stereo mix or a stereo effects return
- HDS-6 to HR-6 linking cables are included, as is a universal mic stand clamp
Compare:
- Every performer in a studio or live sound setting can have a personalized mix without any adjustments at the board
- Perfect for use as a headphone system in the studio, plus drives powered monitors in live sound applications
- Provides each musician with five volume controls: four monaural (for mixer channels or busses), plus one for an overall stereo mix or a stereo effects return
- HDS-6 to HR-6 linking cables are included, as is a universal mic stand clamp
