Submit searchwithin
Current Category: Wall / Floor Boxes

Brand Filter:

Sort By:

Best Sellers Lowest Price Highest Price Latest Products Name A-Z Name Z-A Brand
Ace Backstage
122SLBK - Full Pocket/Standard Lid - Black
  • LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: FULL POCKET

INV#24501

Call

Ace Backstage
PNL-106 - Aluminum P Panel with 6 Connectrix cutouts
  • FLEXIBLE CONNECTOR MOUNT: PNL-100 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
  • DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
  • MEDIUM CONNECTOR CAPACITY: One (1) #PNL-106 "CONNECTRIX" Panel will mount up to 6 "CONNECTRIX" Connectors.
  • EASY INSTALLATION: Standard "CONNECTRIX" Pocket Panels mount with (4 or 6) self-tapping screws. Each Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.
  • DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
  • CUSTOM ENGRAVING: Most Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
  • CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
 

INV#38592

Call

Ace Backstage
PE - Panel - Single Gang Electric Box
  • FLEXIBLE 110VAC MOUNT: FP2E, FP3E, and PE Series Electric Pocket Panels utilize a custom machined mounting panel with cover panels which allow mounting of 1, 2, or 3 gang Edison Duplex outlets.
  • DURABLE CONSTRUCTION: ACE Electric Pocket Panels are made from tough 1/16" thick Steel. Stock Electric Pocket Panels are flat, strong, and rigid. ACE Electric Pocket Panels are machine punched and ready for installation.
  • PE Panel will mount 1 Edison Duplex Outlet.
  • EASY INSTALLATION: Standard Electric Pocket Panels mount with (4 or 6) self-tapping screws. Each Electric Pocket Panel is made to precisely mate within the pocket mounting holes.
  • DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
 

INV#29730

Call

Samson
S PATCH PLUS - S Class 48 Point Patch Bay
  • Fully balanced, extremely durable 48-Point Patchbay
  • Normal, Half-normal and Through Mode operation
  • 3-way Front Panel Mode Switches
  • 1/4" TRS Connectors
  • 19" Rack Mount Chassis
 
Series: S Class

INV#29958

$119.99

Ace Backstage
103BBX - ACE BACKST 103BBX
  • Half Backbox 10"x6"x6"
 

INV#36370

Call

Ace Backstage
DB - Narrow Black Steel Duplex Cover Plate
  • COVERS AC RACEWAY: DB and DC Cover Plates mount directly on top of the AC isolated raceway to cover and complete the finished look of Super Pockets.
 

INV#49898

Call

Ace Backstage
124SLBK - Double Wide Pocket/Standard Lid - Black
  • EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
  • EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#55650

Call

Ace Backstage
ISO102BBX - ACE BACKST ISO102BBX
  • Full Backbox with Isolation Bracket Installed
 

INV#55499

Call

Ace Backstage
025BK - Mini Pocket - Black
  • COMPACT CAPACITY: The Mini Stage Pocket accomodates #MP-100 Series Panels and #MP-200 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #MP-100 Series Panels will mount up to 4 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #MP-200 Series Panels will mount up to 4 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Mini Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.125") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • CABLE WAY SLOTS: Two (2) generous 3/8" x 1-1/4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables.
  • EASY INSTALLATION: Easy installation into 2.880" x 5.505" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Mini Stage Pocket Body. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
 
Series: MINI POCKET

INV#37041

Call

Ace Backstage
104BBX - ACE BACKST 104BBX
  • Double Wide Backbox 10"x18"x6"
 

INV#40306

Call

Ace Backstage
122CLBK - Full Pocket/Carpet Lid - Black
  • LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: FULL POCKET

INV#40709

Call

Switchcraft
9625 - StudioPatch® Series Bantam / TT Audio Patchbay (96 points to DB25)
  • 16 patch points to DB25
  • Programmable grounds
 
Series: all items

INV#102700

$989.00

Ace Backstage
132SLBK - Super Pocket/Standard Lid - Black
  • EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#49893

Call

Ace Backstage
MP-102 - Mini Aluminum Panel with 2 Connectrix cutouts
  • FLEXIBLE CONNECTOR MOUNT: MP-100 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
  • DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
  • COMPACT CONNECTOR CAPACITY: One (1) #MP-102 "CONNECTRIX" Panel will mount up to 2 "CONNECTRIX" Connectors.
  • EASY INSTALLATION: Standard "CONNECTRIX" Mini Pocket Panels clip into pocket body and mount with 2 self-tapping screws. Each Mini Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.
  • DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
  • CUSTOM ENGRAVING: Most Mini Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
  • CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
 

INV#98866

Call

Ace Backstage
123CLBK - Half Pocket/Carpet Lid - Black
  • MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: HALF POCKET

INV#40891

Call

Ace Backstage
102BBX - ACE BACKST 102BBX
  • Full Backbox 10"x10"x6"
 

INV#36810

Call

Ace Backstage
134SLBK - Super DW Pocket/Standard Lid - Black
  • EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#58596

Call

Ace Backstage
PNL-1425 - Aluminum Super Panel with 25 Connectrix cutouts
  • FLEXIBLE CONNECTOR MOUNT: PNL-140 Series "CONNECTRIX" Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
  • DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
  • LARGE CONNECTOR CAPACITY: One (1) #PNL-1425 "CONNECTRIX" Panel will mount up to 25 "CONNECTRIX" Connectors.
  • EASY INSTALLATION: Standard "CONNECTRIX" Pocket Panels mount with (4 or 6) self-tapping screws. Each Pocket Panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes.

    DURABLE FINISH: Oven cured, semi-gloss, black powder coat.

    CUSTOM ENGRAVING: Most Pocket Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
  • CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
 

INV#90881

Call

Ace Backstage
BRK102 - ACE BACKST BRK102
  • Super Pocket Brackets Only
 

INV#115800

Call

Ace Backstage
WP-206 - Double Gang Wall Panel with 6 Connectrix cutouts
  • FLEXIBLE CONNECTOR MOUNT: WP-200 Series CONNECTRIX Wall Panels utilize a custom machined CONNECTRIX System Cutout which combines the popular mounting patterns of the Neutrik® "D" and Switchcraft® "E" series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
  • DURABLE CONSTRUCTION: ACE CONNECTRIX System Wall Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Wall Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
  • COMPACT CONNECTOR CAPACITY: One (1) #WP-200 Series CONNECTRIX Wall Panel will mount up to 6 CONNECTRIX Connectors.
  • EASY INSTALLATION: Standard CONNECTRIX Wall Panels mount with (2 to 8) #6 screws. Each Wall Panel is CNC machined to precisely mate with the designated connectors and in standard gang wall mounting holes.
  • DURABLE FINISH: Oven cured, semi-gloss, black or white powder coat.
  • CUSTOM ENGRAVING: Most Wall Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
  • CUSTOM PANELS AT A LOWER COST: The CONNECTRIX System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Wall Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery.
 

INV#40893

Call

Ace Backstage
FP2E - ACE BACKST FP2E
  • Panel - Double Gang Electric Box
 

INV#190104

Call

Ace Backstage
ISO1028BBX - ACE BACKST ISO1028BBX
  • 8" Deep Full Backbox with Isolation Bracket
  • Installed
 

INV#98820

Call

Ace Backstage
FP3E - ACE BACKST FP3E
  • Panel - Triple Gang Electric Box
 

INV#34672

Call

Ace Backstage
122SLCV - Full Pocket/Standard Lid - Coppervein
  • LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: FULL POCKET

INV#42048

Call

Ace Backstage
104DDBBXW - ACE BACKST 104DDBBXW
  • Double Deep Double Wide BBX Polyurethane Coat
 

INV#98757

Call

Ace Backstage
104DDBBX - ACE BACKST 104DDBBX
  • Double Deep Double Wide Backbox 10"x18"x12"
 

INV#99010

Call

Ace Backstage
104BBXW - ACE BACKST 104BBXW
  • Double Wide Backbox-Polyurethane Coat
 

INV#98761

Call

Ace Backstage
132CLCV - Super Pocket/Carpet Lid - Coppervein
  • EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98784

Call

Ace Backstage
132CLBK - Super Pocket/Carpet Lid - Black
  • EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#51277

Call

Ace Backstage
125SLBK - ACE BACKST 125SLBK
  • RackWell Stage Pocket - Black
 

INV#190101

Call

Ace Backstage
124SLCV - Double Wide Pocket/Standard Lid - Coppervein
  • EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
  • EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98850

Call

Ace Backstage
124CLCV - Double Wide Pocket/Carpet Lid - Coppervein
  • EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
  • EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98853

Call

Ace Backstage
124CLBK - Double Wide Pocket/Carpet Lid - Black
  • EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
  • EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#38590

Call

Ace Backstage
123SLCV - Half Pocket/Standard Lid - Coppervein
  • MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: HALF POCKET

INV#98828

Call

Ace Backstage
123CLCV - Half Pocket/Carpet Lid - Coppervein
  • MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: HALF POCKET

INV#98830

Call

Ace Backstage
025BBX/AC - ACE BACKST 025BBX/AC
  • Mini Backbox with Electric Isolation Bracket
 

INV#98777

Call

Ace Backstage
025BBX - ACE BACKST 025BBX
  • Mini Backbox 5.5"x3.75"x3.5"
 

INV#39632

Call

Ace Backstage
334SLSS - Super DW Pocket/Std SS Lid - Stainless Steel Bezel
  • EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98785

Call

Ace Backstage
334CLSS - Super DW Pocket/Carpet Lid - Stainless Steel Bezel
  • EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98788

Call

Ace Backstage
332SLSS - Super Pocket/Std SS Lid - Stainless Steel Bezel
  • EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98779

Call

Ace Backstage
332CLSS - Super Pocket/Carpet Lid - Stainless Steel Bezel
  • EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98782

Call

Ace Backstage
324SLSS - Double Wide Pocket/Std SS Lid - SS Bezel
  • EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
  • EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98848

Call

Ace Backstage
324CLSS - Double Wide Pocket/Carpet Lid - SS Bezel
  • EXTRA LARGE CAPACITY: The Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, #PE Series Panels, and #FP3E Series Panels in an interchangeable multi-panel system making for easy custom configurations. Four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panel will mount up to 24 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Double Wide Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid is made from 10 gauge (nominally (.135")) thick CRS steel, the Mounting Flange is made from 1/8" (nominally 11 ga. (.120")) CRS thick steel, and the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. Two Cable Way Slot Channel Closures closes slot when not in use.
  • EASY INSTALLATION: Easy installation into 16.8" x 8.5" rectangular cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Double Wide Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98851

Call

Ace Backstage
323SLSS - Half Pocket/Standard SS Lid - Stainless Steel Bezel
  • MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: HALF POCKET

INV#98826

Call

Ace Backstage
323CLSS - Half Pocket/Carpet Lid - Stainless Steel Bezel
  • MEDIUM CAPACITY: The Half Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-100 Series Panels will mount up to 6 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. One (1) optional #PSW-100 Series Panels will mount up to 6 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Half Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 4" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 4.75" x 8.5" rectangle cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange with a brushed finish is also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: HALF POCKET

INV#98829

Call

Ace Backstage
322SLSS - Full Pocket/Standard SS Lid - Stainless Steel Bezel
  • LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: FULL POCKET

INV#98836

Call

Ace Backstage
322CLSS - Full Pocket/Carpet Lid - Stainless Steel Bezel
  • LARGE CAPACITY: The Full Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk®, and/or Switchcraft® type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange with brushed finishes are also available by special order.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 
Series: FULL POCKET

INV#98837

Call

Ace Backstage
234SLBR - Super DW Pocket/Std Brass Lid - Brass Bezel
  • EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.

 

INV#98786

Call

Ace Backstage
234CLBR - Super DW Pocket/Carpet Lid - Brass Bezel
  • EXTRA SUPER LARGE CAPACITY: The Super Double Wide Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-140 Series Panels, eight (8) optional #PNL-100 Series Panels or four (4) optional #PNL-120 Series Panels will mount up to 48 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Eight (8) optional #PSW-100 Series Panels will mount up to 48 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Double Wide Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Double Wide Pocket Body Back Box is precision die formed and jig welded. The Super Double Wide Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Double Wide Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.

 

INV#98789

Call

Ace Backstage
232SLBR - Super Pocket/Standard Brass Lid - Brass Bezel
  • EXTRA LARGE CAPACITY: The Super Stage Pocket accomodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PNL-140 Series Panels in an interchangeable multi-panel system making for easy custom configurations. One (1) optional #PNL-140 Series Panel, four (4) optional #PNL-100 Series Panels or two (2) optional #PNL-120 Series Panels will mount up to 24 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors. Four (4) optional #PSW-100 Series Panels will mount up to 24 Switchcraft® type connectors.
  • DURABLE CONSTRUCTION: All ACE Super Stage Pockets Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Super Pocket Body Back Box is precision die formed and jig welded. The Super Stage Pocket resists bending under even the most severe stage loads.
  • SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and other custom application lids.
  • CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. An attached Cable Way Slot Channel Closure closes the slot when not in use.
  • EASY INSTALLATION: Easy installation into 10” x 10” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
  • DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass and Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Super Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
  • RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
 

INV#98780

Call

Policy & Agreement |Privacy Policy
®2018 TMPPro Inc. All rights reserved.

Loading, Please Wait...