Crown's CTs amps are designed for ultimate flexibility in the fixed-install world. All models feature Phoenix-style in's and barrier strip out's. They support 16/8/4/2 loads, plus 70/140V distribution. Other features include inrush limiting, 35Hz/70Hz HP filters, and independent impedance selectors.

Power Rating: 300 Watts @ 8 Ohms, Dual (Per Channel)

Damping Factor: 10 Hz - 100 Hz:>3000

Input Sensitivity Switchable:
1.4V(8/4 Ohms)
26 dB Gain:
2.46V(4 Ohm Load)
3.47V (8 Ohm Load)
1.4V(70V)

Input Impedance: 10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal)

Gain: 35:1 (31 dB)

Frequency Response: 20 Hz - 20 kHz +/-0.25 dB @ 1 Watt

Signal-to-Noise Ratio: 105 dB A-Weighted, below rated power(20 Hz - 20 kHz)

Total Harmonic Distortion (THD): < 0.1%, at full rated power (20 Hz - 20 kHz)

Input Connections: 2 x Balanced 3-Pin Terminal Block Connectors(one per channel)

Output Connectors: 1 x 4-Pole Terminal Strip(Ch 1, Ch 2)

Controls Front Panel: 1 x Power Switch

Controls (Rear): 1 x Reset Switch
1 x Rotary Channel Level Control(per channel)
1 x 2-Position Operation Mode Switch
1 x Highpass Filter Switch(per channel)
1 x "Y" Input Switch
1 x Interior 3-Position Input Sensitivity Switch(per channel)

Indicators Front Panel:
1 x Yellow LED Bridge Mode Indicator
1 x Green LED Ready Indicator
3 x Green LED Signal Indicators(per channel)
1 x Red LED Clip Indicator(per channel)
1 x Red LED Thermal Indicator(per channel)
1 x Red LED Fault Indicator
1 x Yellow LED Data Indicator(per channel)
1 x Blue LED Power Indicator

Cooling: Continuously Variable Speed Fans

Ventilation: Grille (Front), Cooling Vents(Back)
Front-to-Rear forced airflow

Power Consumption: 24 Watts (120 VAC Mains)

Dimensions: 19 x 3.5 x 14.25" (483 x 89 x 362mm)

Weight: 22.8 lb (10.3 kg)