CMX300V
CMX Series 830W Installation Amplifier
Click for Larger Image
Click for Larger Image
- 70 volt direct model
- "Flex-Use" Input connectivity choices including actively balanced barrier strip, XLR, or 1/4" TRS
- Rack mountable with chassis less than 16" or 40.6 mm deep
- 1 dB recessed, detented gain controls for fast, accurate and repeatable settings
- Tamper-proof security cover for gain controls
- Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and the additional choice of enabling/disabling low frequency filter protection
- Low-noise variable-speed fans with rear-to-front airflow keep amplifiers and racks cool
- Information
- Details
- Feedback
The CMX Series is an economical and rugged power amplifier designed to meet the needs of system integrators. It is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. The CMX feature sets are designed for wide-ranging application in facilities such as performance halls, houses of worship, sports clubs, gymnasiums, dance venues, pubs, and FGM/BGM systems. The CMX Series provides unmatched performance, the right power for the job and an affordable price point.
The CMX300V must be configured for bridged-mono operation in order to directly drive high-impedance systems
Damping Factor, 1 kHz and below: Greater than 300 at 8 ohms
Input Impedance: 10k ohms unbalanced, 20k ohms balanced
Input Clipping: 10 Vrms (+22 dB)
Cooling: Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel
Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm)
TRS tip and XLR (pin 2 positive)
Output: detachable terminal block and Neutrik™ Speakon™
Controls
Front: AC switch, Ch. 1 and Ch. 2 gain knobs
Rear: 10-position DIP switch
Indicators
Power-On: Green LED
Signal: Green LED (1 per channel)
Clip: Red LED (1 per channel)
Amplifier Protection: Stable into reactive or mismatched loads
Load Protection: On/off muting
Power Requirements: 120, 230 VAC, 50-60 Hz
The CMX300V must be configured for bridged-mono operation in order to directly drive high-impedance systems
Damping Factor, 1 kHz and below: Greater than 300 at 8 ohms
Input Impedance: 10k ohms unbalanced, 20k ohms balanced
Input Clipping: 10 Vrms (+22 dB)
Cooling: Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel
Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm)
TRS tip and XLR (pin 2 positive)
Output: detachable terminal block and Neutrik™ Speakon™
Controls
Front: AC switch, Ch. 1 and Ch. 2 gain knobs
Rear: 10-position DIP switch
Indicators
Power-On: Green LED
Signal: Green LED (1 per channel)
Clip: Red LED (1 per channel)
Amplifier Protection: Stable into reactive or mismatched loads
Load Protection: On/off muting
Power Requirements: 120, 230 VAC, 50-60 Hz
| Product Attributes | |
| Channel Count | 2 |
| Power/Ch. 8ohm/4ohm/2ohm | 185/280/430 |
| Bridged 8ohm/4ohm/2ohm | 530/830,600@140V |
| Rackspace | 2 |
| Topology | Class AB |
For more information about this product contact a TMP Pro Rep today @ 800.289.8889
Brand Name
QSC
Model Number:
CMX300V
TMP Item #:
61948
Series Name:
CMX
Map:
567.00
List:
567.00
Short Description:
CMX Series 830W Installation Amplifier
Channel Count
2
Power/Ch. 8ohm/4ohm/2ohm
185/280/430
Bridged 8ohm/4ohm/2ohm
530/830,600@140V
Rackspace
2
Topology
Class AB
QrCode
Barcode
To leave a review for this product, please login in:
