The affordably priced 3D HDMI CATx Extender makes it easy to extend digital video from a source to a distant 3D screen in a lobby or other high-traffic area.
Because the extender can transmit over solid copper cabling already installed in your building, it's easy to put your new 3D screens in spaces where your target audiences frequent—and you don't have to pull any new cables and/or sacrifice video quality in the process. It's perfect for applications that require greater distance for high-quality video resolutions on HDTV and 3D displays.
Over a single dedicated CAT6 cable run, it extends 1080i or 720p video with 24-bit color depth as far as 200 feet (60 m) and 24-bit Full HD 1080p video up to 130 feet (40 m). It also works over CAT5e cable but at shorter distances (see the Tech Specs). And for 36-bit 1080p color, it can go up to 65 feet (20 m).
Configuration is minimal. You select your video and audio type, as well as activate the learning of EDID info from the remote display, using the 8-position rotary switch on the transmitter.
To minimize skew over long cable distances, the 3D HDMI CATx Extender features adjustable eight-level equalization control on its receiver. Adjusting the equalization strength optimizes the video signal for transmitting greater distances between the source and display.
The extender supports high-quality sound, too. As part of the HDMI signal, it transmits DTS-HD and Dolby® TrueHD high-bit-rate audio and 7.1-channel surround sound audio.
• (1) transmitter
• (1) receiver
• (2) power supplies with power cords
• Wallmounting screws
• User manual
For more information about this product contact a TMP Pro Rep today @ 800.289.8889
TMP Item #:
UPC / EAN:
3D HDMI CATx Extender
|Type||Quantity||Length (in)||Width (in)||Height (in)||Weight (lb)|
|Audio Support||Up to 7.1-channel surround sound or stereo digital audio|
|Controls|| Equalization: 8-level digital signal control using rotary switch on the receiver;|
AV mode: 8-level control using rotary switch on transmitter
|Distance (Maximum)*|| 200 ft. (60 m) from the HDMI source at HD 1080i or 720p 24-bit color;|
130 ft. (40 m) from the HDMI source at Full HD 1080p 24-bit color;
65 ft. (20 m) from the HDMI source at Full HD 1080p 36-bit color
|Input DDC Signal||5 volts (p-p, TTL)|
|Input TMDS Signal||1.2 volts (p-p)|
|Resolutions Supported||480i/480p, 720p, 1080i/1080p at 60 Hz up to 36-bit color|
|Video Bandwidth||Single-link 225 MHz (6.75 Gbps)|
|Connectors||Transmitter: (1) HDMI input, (1) RJ-45 output (CATx interconnect); |
Receiver: (1) HDMI output (1) RJ-45 input (CATx interconnect)
|Power|| For both the transmitter and receiver:|
AC input: 100-240 VAC, 50-60 Hz;
DC output: 5 VDC, 2 amps;
Consumption: Transmitter: 4 watts (max.);
Receiver: 1.5 watts (max.)
|Size||Both transmitter and receiver units: 1"H x 2.4"W x 3.6"D (2.5 x 6.1 x 9.2 cm)|
|Weight|| Transmitter: 0.5 lb. (0.3 kg)|
Receiver: 0.4 lb. (0.2 kg)
* NOTE: Distance depends on the characteristics and quality of the cables and the type of HDMI source and display. Higher resolutions and longer transmission distances require low-skew cables (<25 ns>