Whirlwind

All-In-One Audio Line Tester

Brand: Whirlwind
Model: QBOX
UPC: 692465004220
1/4" jack for line-in or a 2k Ohm (telephone) earpiece out
For an instant hands-free intercom, just plug in headphones and hook up one Qbox on each end of a line and use the built-in microphone.
Includes a microphone, a speaker, a test tone generator
Outputs for standard headphones
Use it as a squawk box to the stage from the main audio console during set-up.
Use it to monitor a standard 3-wire intercom feed - LEDs confirm the presence of intercom or phantom power.
Please log in to see your price
Specification Sheet

Related products

Model: CM-C200
Please log in to see your price
Model: CPTS0000
Please log in to see your price
Model: JIB/CT
Please log in to see your price
Model: TEST-SM
Please log in to see your price
Model: TEST-RK
Please log in to see your price
Model: TEST-LG
Please log in to see your price
Model: CT2
Please log in to see your price
Model: MTEST-1
Please log in to see your price

Customers who bought this product also purchased

Model: EP-M6PROG2-CL-MEE
Please log in to see your price
Model: GFT-450BK-BULK
Please log in to see your price
Model: SM7DDB
Please log in to see your price
Model: 266XS
Please log in to see your price
Model: PLEXI CRUNCH
Please log in to see your price
Model: KSM8/B
Please log in to see your price

Product Properties

Description:

Since its introduction in 1997 the Qbox has become one of Whirlwind's most successful "Black Boxes" ever.

The Qbox is the all-in-one audio line tester ideal for applications such as live sound, maintenance, installation work - anywhere audio runs down a cable. The Qbox includes a microphone, a speaker, a test tone generator, outputs for standard headphones, a 1/4" jack for line-in or a 2k Ohm (telephone) earpiece out. A handy clip attaches the Qbox to your belt or equipment rack.

Simply generate into or listen to audio at any point in your system from the mics to the power amps to quickly confirm which sections are working and which ones aren't. The Qbox can quick-check dynamic mics and cables without firing up the entire system. Use the bult in mic or tone generator at three different levels for activating a signal path or identifying a specific cable in a pile of cable ends. Powered by a single standard 9V alkaline battery and housed in rugged ABS, the Qbox is light yet able to withstand the wear and tear of fieldwork.

For an instant hands-free intercom, just plug in headphones and hook up one Qbox on each end of a line and use the built-in microphone.

Use it to monitor a standard 3-wire intercom feed - LEDs confirm the presence of intercom or phantom power.

Use it as a squawk box to the stage from the main audio console during set-up. Works in a pinch as a handy, portable, powered monitor too.

The SOURCE section of the Qbox lets you send a tone or the signal from the built-in condenser mic at mic or line levels.

The SPEAKER volume control lets you confirm incoming signals at mic or line level.

A handy MONITOR switch allows the user to listen to a balanced signal or to two separate unbalanced signals on pin 2 or 3 (referenced to pin 1), such as a two-channel intercom.

A SPLIT switch disconnects the two XLRs from each other so tone or internal mic can be sent out of one XLR while you listen to what's coming back on the other. Or connect the XLRs together and "loop-through" or daisy-chain units.

Viewed Products