Shure

Microflex Series Compact Boundary Microphone (Black, Cardioid)

Brand: Shure
Model: MX391/C
UPC: 042406051521
Products Variants:
Balanced, transformerless output for increased immunity to noise over long cable runs
Flat frequency response across the vocal range for uncolored sound
Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
Sleek, low-profile design for unobtrusive appearance
Please log in to see your price
Specification Sheet

Related products

Customers who bought this product also purchased

Model: SP14-25
Please log in to see your price
Model: WL185
Please log in to see your price
Model: SP14-10
Please log in to see your price
Model: ULXD1=-G50
Please log in to see your price

Product Properties

Description:

Microflex�Boundary Microphones are the high-quality solution for a range of applications such as altars, boardrooms and distance learning centers. Every Microflex Boundary microphone features a choice of interchangeable condenser cartridges.

The MX391 includes an attached 4 meter (12 ft) cable terminated with a 4-pin mini connector and separate preamplifier. A rubber strain relief is provided for applications that require removing the 4-pin mini connector and connecting the mic cable directly to screw terminals in the preamplifier.

Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%

All measurements taken with the microphone mounted on a 76.2 cm x 76.2 cm (30 in. x 30 in.) wooden surface and with the sound source incident at 30 degrees with respect to the surface plane.

Frequency Response
50 to 17,000 Hz

Output Impedance (at 1000 Hz)
180 ohms actual (rated at 150 ohms)

Open Circuit Sensitivity 1 kHz ref. 1 V per Pascal *
Cardioid: -29.6 dB (33.5 mV)
All settings -12 dB at 0 gain; *1 Pascal = 94 dB SPL


Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 k ohm load)
Cardioid: 118.8 dB
All settings +6 dB at 0 gain

Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 71.4 dB

Equivalent Output Noise (A-weighted)
Cardioid: 22.6 dB SPL

Dynamic Range at 1 k ohm Load
96.2 dB
100 dB at 0 gain

Common Mode Rejection
45 dB minimum, 10 Hz to 100 kHz

Preamplifier Output Clipping Level
-6 dBV (0.5 V)
12 dB at 0 gain

Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the preamplifier XLR output connector.

Power Requirements
11 to 52 Vdc phantom
2.0 mA current consumption

Viewed Products