Shure

BETA Series Supercardioid Handheld Condenser Microphone

Brand: Shure
Model: BETA87A
UPC: 042406054744
Products Variants:
117 dB dynamic range
Advanced shock-mounted cartridge system
Built-in pop filter
Consistent supercardioid polar pattern for high gain-before-feedback
Electronic LF roll-off compensates for proximity effect
Low susceptibility to RFI andEM hum
Smooth response with gradual presence rise
Please log in to see your price
Specification Sheet Specification Sheet

Related products

Model: AS420V2
Please log in to see your price
Model: AS400V2
Please log in to see your price
Model: SM58-LC
Please log in to see your price
Model: SM57-LC
Please log in to see your price

Customers who bought this product also purchased

Model: MS7701B
Please log in to see your price
Model: SM7122BB
Please log in to see your price
Model: DS7200B
Please log in to see your price
Model: KSP100
Please log in to see your price
Model: QK-2B
Please log in to see your price
Model: TCM1500
Please log in to see your price
Model: MS7201B
Please log in to see your price

Product Properties

  • Capsule Type
  • Condenser
  • Product Type
  • Handheld Microphone

Description:

The Shure Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.

The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the �boomy� sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.

Cartridge Type
Condenser (electret bias)

Frequency Response
50 to 20,000 Hz

Polar Pattern
Supercardioid

Output Impedance
Rated at 150 ohms (100 ohms actual +/- 20%)
Recommended minimum load impedance: 800 ohms

Sensitivity (at 1,000 Hz)
Open Circuit Voltage -52.5 dBV/Pa (2 mV)
(1 Pa = 94 dB SPL)

Clipping Level (at 1,000 Hz)
1000 ohm Load: -6 dBV (0.5 V)

Maximum SPL (at 1,000 Hz)
140.5 dB (0.25% THD, 1000 ohm load)

Self-Noise
(equivalent sound pressure level; measured with true rms voltmeter)
23.5 dB typical, A-weighted
25.5 dB typical, weighted per DIN 45 405 Dynamic Range
117 dB (maximum SPL to A-weighted noise level)

Signal-to-Noise Ratio
70.5 dB at 94 dB SPL (IEC 651)
(S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)

Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3

Power
Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3

Current Drain: 1.0 to 1.2 mA

Connector
Three-pin (XLR) professional audio

Case
Aluminum construction with blue metallic finish, and hardened steel grille with nickel satin chrome plating

Net Weight
207 grams (7.6 oz)

Viewed Products