ChoirMic Series 30kHz Hanging Microphone (Hypercardioid, White)

Choir microphones have always presented a unique design and installation challenge – the traditional solution is to use an angle guide on the microphone’s lead to aim towards the performance venue. The problem with this approach is that either a very small microphone had to be used to keep aimable weight within practical limits – or locate the microphone’s electronics at some considerable distance from the element – inviting losses and noise. The ChoirMic™ Series solves all of these problems. Our hanging choir microphones provide pristine audio quality without spotlighting and more gain before feedback while picking up almost no sound from the rear of the microphones. They are ideal for miking choirs and orchestra or band in front of the choir.

Frequency Response: 30Hz to 30kHz ±2dB at 12 inches (30.5cm)

Polar Pattern: Hypercardioid

Sensitivity: 10mV/Pa (-40dBV/Pa)

Power Requirements: 48V Phantom, 10mA

Max Acoustic Input: 145dB SPL

Output: XLR (pin 2+)

Output Impedence: 100? balanced (50? each pins 2 & 3)

Min Output Load: 600? between pins 2 & 3

Noise: 22dB SPL equivalent (A weighted)

Dimensions L x D: 324mm x 22mm (12.75 x .860 inches)

Attached Cable: 30 feet (9.14m) Canare Star Quad

Weight: .22 lb. (100g) microphone only
1.2 lb (544.3g) microphone with 30? cable