Flexsys Series 2 x 12" Active Speaker

The F212 is an active two-way system with considerable reach. A very efficient and powerful mid-/high-range unit, it was designed to be combined with active subwoofers to construct high-performance PA systems.

Loaded with two 12“ woofers, this assertive cabinet throws sounds across considerable distances, performing exceedingly well in the low midrange. Its excellent directivity comes courtesy of ADC (Acoustical Directivity Control) technology that also allows F212 enclosures to be clustered to achieve wider coverage.

The cabinet is driven by two bi-amped digipro® Class-D digital power amps with switched-mode power supplies offering PFC to ensure peak performance even under less-thanperfect live conditions. A custom-engineered, array-enabled 60° x 40° CD horn, coupled to a next-generation 1“ RCF neodymium compression driver, delivers assertive, high-definition response throughout the upper frequency range.

Sited on top, the high-frequency horn is at a height perfect for stacked arrays, so ground stacks do not have to be placed on platforms or other raised structures. Thanks to the integrated tilt unit, aligning F212 towards the audience is very easy.

With this combination of muscular digital power amps and neodymium magnets, the F212 is a powerful cabinet whose ability to produce exceedingly high SPL belies its surprisingly light weight.
,
Speaker Type: 2-Way Active Speaker
Frequency Response [-10dB]: 50 - 20.000 Hz
Frequency Response [+/- 3dB]: 65 - 19.000 Hz
Max SPL: 132 dB
HF: 1 "
Type HF: RCF neodymium compression driver, Titanium voice coil
Voice Coil HF: 1.75 "
Directivity: 60 x 40 °
Horn: CD Horn
Rotatable Horn: Yes
LF: 2x 12 "
Voice Coil LF: 2.5 "
Amp Technology: digipro
Amp Class: Class D
Power PRG: 1000 W
HF Amp: 250 W/RMS
LF Amp: 500 W/RMS
Cooling: Convection
Signal Input: 1x XLR
Signal Output: 1x XLR
Power Socket: Powercon In, Powercon Out
Housing: Multiplex
Housing Design: Trapezoidal
Color: Black
Surface Texture: Textured acrylic lacquer
Handles: 1x on top, 2x side, 1x bottom
Pole Mount: 36mm
Tilt Unit: Integrated, stepless
Front Grille: Metall, 1.5mm with acoustical foam
Rigging Points: 12x M10
Width: 360 mm (14.4 in)
Height: 930 mm (37.2 in)
Depth: 500 mm (20 in)
Weight: 31.5 kg (69.45 lbs)