Hot Sellers
- Our best seller!
- Special formula EVA rubber
- Friction locking knob locks into "V-groove" and prevents rotation
- Stepped yoke and solid steel rod with locking keyway
- Heavy-duty sheet metal leg housing
- Non-slip rubber end caps
INV#11051
- Our best selling stand, the MS7701B features a steel-reinforced plastic leg housing which offers less weight and exceptional strength
- Folding legs with plastic endcaps for durability and reduced floor vibrations
- Steel midpoint locking clutch adjusts height from 32" to 61.5"
- 30" removable boom arm allows for easy positioning
INV#10700
- Acoustically transparent foam
- Fits popular handheld and instrument microphones
- Black
INV#12090
- Full size piano-style pedal
- Polarity switch for universal compatibility
- Chrome foot pedal comes with a removable scratch resistant cover, which doubles as a non-slip foot grip
- Built-in 6' cord with 1/4" input jack
INV#13427
- Excellent stand for desktop and short height miking
- Removable shaft with die-cast steel clutch provides height adjustments from 9" to 13"
- Solid sand-cast base with non-slip rubber feet for stability and vibration dampening
INV#12463
- Converts mic stands and accessories from 5/8" threading to 3/8"
- Knurled finish provides excellent grip
INV#12532
- One of the most popular microphone stands ever made
- 7 lb. Sand-cast base with rubber padding for reduced floor vibrations is sturdy yet light enough for transport
- Features a diecast zinc clutch for height adjustments from 33"-60" and 5/8"-27 solid threaded upper shaft with positioning washer
- Black finish
INV#10691
- Specially designed to grip your wireless mics securely
- Memory rubber helps retain its shape use after use
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11274
- Spring loaded to grip your mics securely yet provide quick access
- Soft lining protects your mics and helps prevent slipping
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11267
- 25mm, fits most handheld dynamic mics
- Reduces the effect of low-end rumble and floor vibrations
- Standard 5/8"-27 female threaded brass insert in a heavy-duty plastic base
- Lifetime Warranty
INV#11277
- Instantly connect or disconnect your mic clip or boom from your stand
- Easy to use quik-release push button
- Shock absorbing rubber washer
- Standard 5/8-27" threading at both ends
- Black color
INV#12639
- For decades the most widely used strap lock system for guitars and basses
- Indestructible even under the toughest conditions on stage
- An inadvertent loosening of the strap is impossible
INV#225492
- Use standard mic stands to mount still and video cameras or popular handheld audio recorders
- Ball-head allows for independent pan and tilt with 360 degree pan movement and 180 degree tilt
- 5/8" 27-thread female to 1/4" thread male
INV#12037
- Double-X workhorse ensures stability and holds more weight with sturdy 1" tubing
- 5-Position disk clutch with bullet-nose pull knob make for quick and simple height and width adjustments
- Arm sleeves can be positioned to fit virtually any keyboard width
- Welded construction
- Black powder coat finish
INV#11136
- 13" of strong flexibility for precise mic placement
- Pinch point-free rolled metal
- Standard 5/8"-27 threading on both ends
- Holds up to 2.5 pounds
INV#10674
- M20 threading eliminates wobble at subwoofer
- All-steel shaft adjusts from 31.25"-55" with a friction locking knob and security pin for added security
- Fits 1 3/8" speakers and subwoofers
- Removable M20 lug enables use with threaded sockets as well as traditional pole cups
INV#14055
- Standard thread size fits most brand name ball-shaped dynamic microphones
- Die-cast zinc sphere retainer rings
- Durable wire mesh grille
- Inner foam filter to reduce wind and breath "pop" noises
INV#12552
- Fits 1 3/8" speakers and subwoofers
- All-steel construction
- Features a 2-section vertical shaft with preset height adjustment holes and locking pin for added security and height range of 31 5/8" to 55"
INV#14015
- 19" of strong flexibility for precise mic placement
- Pinch point-free rolled metal
- Standard 5/8"-27 threading on both ends
- Holds up to 2.5 pounds
INV#10675
- Holds most guitars, ukuleles, and other small stringed instruments (to accommodate smaller stringed instruments, bend yoke inward.)
- Yoke assembly swivels to allow the guitar to hang straight
- Solid pine and steel construction
- Black EVA rubber yoke
INV#12035
- Our strongest A-Frame
- Patented stepped yoke holds both acoustic and electric guitars
- Also holds desktop mixers and combo amps
- EVA foam padding won't damage your guitar
- 10-degree tilt back angle and splayed foot print make for a stable foundation
- Non-slip rubber end caps
- Heavy-duty 1 x 1" tubing
INV#11239
- Specially designed interior diamond pattern strengthens its grip on your mics
- Memory rubber helps retain its shape use after use
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11276
- Great for picks, capos, phones, small percussion... just about any small accessory
- Mounting bar has a threaded end and positioning washer, which allows you to mount an additional mic...perfect for miking an instrument
- Clamps to any standard mic stand
- Steel construction and easy mounting makes this ideal gig gear
INV#10666
- Ideal utility mount for installing 5/8"-27 mic clips, goosenecks, and accessories to flat surfaces
- 3mm shock pad reduces unwanted vibrations
- 2.3" diameter conserves space
- Black finish
INV#11981
- Durable articulating boom arm provides quiet and flexible positioning for broadcast and webcast miking
- Solid 5/8"-27 end mates with all common mic clips and offers plenty of room for oversized shockmounts and mics weighing up to 3.5 lbs
- A 10' XLR cable is pre-installed within the tubing for a clean look
- Two mounting options include C-Style clamp that grasps surfaces up to 2" thick and flange mount for permanent desktop or overhead installations
INV#12550
- Pefect for ukulele, bass and other stringed instruments
- Soft Felt Material
- Triangle shape measures 25mm x 30mm
- Colors: White, blue and purple
INV#12979
- Allows you to mount a camera or camcorder onto a mic stand
- Knurled finish provides excellent grip
INV#12531
- This heavy-duty Platinum Series stand is built to last
- A steel 19"-30" telescoping boom with metal clutch, zinc die-cast end caps, steel shafts, and metal counterweight make the MS9701TB truly professional
- A new ergonomic center clutch grip that adjusts height from 36" to 64" , coupled with an anti-rotating device on the lower shaft, makes for easy one-hand height adjustments
- Allen nuts and bolts in the leg housing allow for tension adjustments
INV#11657
- Classic design folds for easy storage and portability
- Includes music stand bag
- Adjustable tilting bookplate holds three 8.5" x 11" sheets, folds down flat for storage
- Fold out extensions hold sheets securely in place
- Friction locking clutch adjusts height from 26-40" for sitting or standing positions
- Tripod leg assembly adjusts for varying floor space availability and folds flat for storage
- Added leg braces and non-slip rubber feet for added stability
- The sheet music stand bag included in this combo pack comes with a convenient shoulder carrying strap. All edges are piped and the durable material make this bag a smart choice to protect your stand.
INV#11052
- Padded durable nylon bag provides ample room for either two speaker stands, six mic stands or various drum hardware
- Features an adjustable shoulder strap with metal clip for fast removal as well as hand straps for convenient handling
- Two heavy gauge metal pulls are attached to the zipper so that the bag can be zipped at the center or side
- All sides are crafted with corded piping that gives the bag its rigid shape
INV#13160
- Features a steel-reinforced plastic leg housing which offers less weight and exceptional strength
- Folding legs with plastic endcaps for durability and reduced floor vibrations
- Steel midpoint locking clutch adjusts height from 32" to 61.5"
- Removable telescoping boom arm adjusts from 20" to 36" and allows for easy positioning
INV#10767
- 30mm, fits most handheld wireless mics
- Reduces the effect of low-end rumble and floor vibrations
- Standard 5/8”-27 female threaded brass insert in a heavy-duty plastic base
- Lifetime Warranty
INV#11284
- Adjusting from 8" to 12" High and 3 1/2" to 9 1/2" Wide the TCM1500 accomodates vast array of tablet sizes from 7.9" to 12.9", including iPad Pro and Microsoft Surface
- Lightweight, less than 1 lb, yet made of strong, durable plastic with soft protective padding at contact points
- Assembly adapter allows holder 180 degree tilt and 360 degree rotation
- Includes a battery/cell phone holder that adjusts from 2 1/2" to 4"
INV#13534
- Standard 5/8"-27 threaded ends will fit most standard mic clips, goosenecks, and booms
- 95 degrees tilt on either side creates versatility
INV#12645
- Flexible and durable PVC jacket
- Strength to withstand everyday use
INV#11002
- Compact shape makes for easy positioning in those tight spaces
- 16" articulating boom provides 320 degrees of easy angle adjustment
- Die-cast steel clutch provides height adjustments from 8" to 14"
- At 4.5" x 7.5", this heavy-duty "U" shaped base is small yet stable and sturdy
INV#13230
- Holds up to 7 handheld mics, including wireless (38mm diameter)
- Black silicone inserts provide cushioned protection
- 6.75" x 7.5" Semi-Elliptical Design
- 5/8" -27 center hole with removable 3/8" adapter included
- Lightweight aluminum - only 0.5 lbs
- Black powder coat finish
INV#13394
- Replacement Foam Windscreens and Clothing Clip
- For all WH10, WH20 Headworn Microphones (Contains
- Two)
INV#6495
- Direct replacement for the Yamaha PA130 AC adapter
- Smart circuit reduces power when not in use
- Compatible with most battery-powered Yamaha keyboards such as the PSR-E403, YPT-400, EZ-200, EZAG, SV-120, SVC-50, SVC-100, SVC-200 and SVB-100
- Also compatible with many 12V volume pedals, wah pedals, etc.
INV#13076
- Lok-Tight construction for easy assembly
- Arm sleeves can be positioned to fit virtually any keyboard width
- 1" Square tubing for strength and durability
- 5-Position disk clutch with bullet-nose pull knob make for quick and simple height and width adjustments
INV#12759
- Unrolls in seconds and remains flat; it won't curl up at the edges
- Made from durable, non-slip PVC material
- Keep your bass drum from 'creeping' across the floor
- Black with green accents
- Includes nylon bag with shoulder strap
INV#12039
- Traditionally-styled guitar capo
- Spring-loaded design
- Diecast zinc alloy construction
- Silicone padding provides uniform pressure and protects neck/fingerboard
INV#10139
- 6" pop filter suppresses P's, B's and breath noise
- Improves Vocal Recordings
- Helps protect microphone from moisture
- 6" Gooseneck with clothespin-style clip
INV#12493
- Sleek European-syle mic clip made of hard plastic
- For use with most dynamic microphones
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11279
- The strength and stability of a tubular tripod base with the convenience of easy height and angle adjustments
- Bookplate holds three 8.5" x 11" sheets
- Angle adjusts for sitting or standing positions
- Fold out extensions hold sheets securely in place
- Telescoping 3-section vertical shaft with 2 ergonomic clutches adjusts height from 20"-52"
- Tripod folding base folds for storage and travel
- 16mm Tubular legs, leg braces and non-slip rubber end caps for added strength and stability
- Includes black bag with convenient shoulder carrying strap. All edges are piped and the durable material makes this bag a smart choice to protect your stand.
INV#13037
- 4" pop filter suppresses P's, B's and breath noise
- Improves Vocal Recordings
- Helps protect microphone from moisture
- 6" Gooseneck with clothespin-style clip
INV#12492
- Easy to use mic clip with special low-profile open design creates a secure grip for dynamic microphones.
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#12495
- Fits large diaphragm condenser mics 42-48mm in diameter
- Clamp interior is lined with cloth to protect your mic
- Die-cast steel adapter with 5/8"-27 threads. Angle adjustments will lock into place
- Black finish
INV#12541
- Side mount support for extra stability and will hold up to 80 lbs.
- Mount to wall with the included lag screws and toggle bolts
- Included adapter provides universal fit from standard 1 3/8" to 1 1/2" speaker cabinets
- Sold as pair
INV#10735
- Perfect for the home studio
- Ergonomic Z-frame constructed from steel
- Laminate surfaces
- Slide-out keyboard tray
- Steel Tubing: 1" x 1"; 1" x 2" on horizontal floor legs
- Weight Capacity: 175 lbs
- Keyboard Tray Height: 25"
- Platform Height: 29"
- Top Platform Height: 37.5"
- Dimensions: 43"(w) x 30"(d)
INV#12504
- Display a combination of electric and acoustic instruments on stage
- Padded yoke and base
- Stable no matter how many slots are full
- Backrest folds downwards for easy transport
INV#10587
- Nickel plated connectors
- Flexible, durable black jacket
- Includes Velcro strap
INV#11028
- Faster string loosening and tightening
- Durable plastic head
- Built-in notch removes acoustic bridge pins
- Works with most guitars, basses, banjos, and stringed folk instruments.
INV#10580
- Unrolls in seconds and remains flat; it won't curl up at the edges
- Made from durable, non-slip PVC material
- Keep your bass drum from 'creeping' across the floor
- Black with green accents
- Includes nylon bag with shoulder strap
INV#12040
- 1/4" male to 1/8" female gold-plated terminals protect against signal loss and resist corrosion
- 360-degree grip treads facilitate ease of operation
INV#13055
- This lightweight stand features a reversible shaft design and can be used with 1 3/8" or 1 1/2" speaker cabinet insertspin
- Aluminum shaft adjusts from 45" - 72" with a friction locking knob and security pin for added security
- Locking/Retractable leg housing with 120 degree design for low center of gravity and equal weight distribution
INV#10650
- Steel-reinforced plastic leg housing offers less weight and exceptional strength
- Folding legs with plastic endcaps for durability and reduced floor vibrations
- Steel midpoint locking clutch adjusts height from 32" to 61.5"
INV#10699
- 2-Pull zipper allows bag to be unzipped lengthwise from center
- Rugged 600-D nylon material repels rain and is easy to clean
- Carrying handles are stitched to both the front or back of the bag for reinforced strength
- Front zip pocket holds your pics, replacement strings or even the removable backpack straps
INV#12476
- Acoustically transparent foam
- Fits popular handheld and instrument microphones
- Blue
INV#12091
- Reduce wind, breath, and popping noises
- Keep your mics clean
- Flexible foam material
- Fits most popular handheld mics
INV#12519
- This steel-aluminum speaker stand with 1 3/8" upper shaft comes with an 1 1/2" adapter, making it universal for
- Features a 2-section vertical shaft with preset height adjustment holes and locking pin for added security
- The tripod folding base with 120 degree design for low center of gravity folds flat and non-slip rubber end caps add stability
INV#10649
- Add second keyboard to any keyboard stand with round or square tubing
- Can be stacked on top of a 2-tier stand making it a 3-tier stand
- Includes two "cork-style" end caps
- 36 Radial slots adjusts the angle of the 2nd tier and secure any position in place
- Telescoping stabilizer bar adjusts along w/ the width of your keyboard stand
- Universal mounting attachment fits into any 1" or 30mm round or square tubing
INV#11982
- Sized for ukulele, violin, viola, mandolin, lap steel guitar, dulcimer, and similar instruments
- Lightweight and unobtrusive
- Constructed of 7mm steel wire
- All contact points lined with safe EVA rubber
INV#10588
- 6" pop filter
- Lightweight plastic hoop
- Micro-weave black nylon diffuser
- Bar clamp secures to shafts up to 7/8" in diameter
- 13" Gooseneck
INV#12510
- Protect your amp by getting it off the floor
- A-frame construction for stability stable
- Padded support arms fold down for quick and easy storage
- Friction locking knob quickly and easily adjusts shelf height to five different positions
- Locking cross brace adds strength and support
- Single hinge allows legs to fold quickly and easily for storage and travel
INV#11653
- This speaker stand pack includes two of our top-selling speaker stands and our top-selling bag
- This lightweight stand features a reversible shaft design and can be used with 1 3/8" or 1 1/2" speaker cabinet inserts
- Padded durable nylon bag provides ample room for either two speaker stands, six mic stands or various drum hardware
INV#10634
- Provides the perfect flattop workspace for your laptop, CD player/controller, EFX machine, lighting controller or any other accessories
- Punched ventilation slots provide air circulation to keep devices cool
- Sliding/removable tabs adjust to accommodate the width of your laptop, tablet, mixer, etc.
- Standard 5/8"-27 threading attaches to standard mic stands
INV#10771
- The Pack includes two all-aluminum, height adjustable speaker stands and one convenient carry bag that holds both stands
- Eight preset height adjustment holes and locking pin for added security adjusts height from 45" to 74.75"
- Bag features a drawstring closure, adjustable shoulder carrying strap, and interior center divider
- Weight Capacity: 120 lbs
INV#10633
- Maple Wood, Wood Tip
- Stronger, straighter and last longer
- Air kiln dried
- Brick of 12 pairs
INV#11133
- 1-3/8" inner diameter
- Dimensions: 7" x 4.5"
- Shaft insert depth: 3"
- Distance between holes (length): 5.9"
- Distance between holes (width): 2.75"
- Black finish
- Includes hardware
INV#12582
- 6" of strong flexibility for precise mic placement
- Pinch point-free rolled metal
- Standard 5/8"-27 threading on both ends
- Holds up to 2.5 pounds
INV#10673
- The stress rated steel hex nut and bolt is strong enough to support up to 80 lbs. and also allows for horizontal swivel adjustments 30 degrees left and right
- Standard 1 3/8" insert fits most speaker cabinets
- Ergonomic 2" knob adjusts tilt angle from 90 degree angle to 30 degree angle handling 22" to 30" cabinets
INV#11715
- Sturdy C-shaped mount for installing 5/8"-27 mic clips and accessories to desk/tabletops
- Nylon tipped screw firmly grips tabletops between 0.625" to 1.625"
- Ideal utility mount for installing 5/8"-27 mic clips and accessories to flat surfaces
INV#11989
- Lok-Tight construction for easy assembly
- Patented ERGO-LOK<
> system features an ergonomic trigger, an internal rod mechanism and a solid-steel springloaded deadbolt assembly - Adjustable rubber arm sleeves can be positioned to fit virtually any keyboard width
- 30mm Square tubing
- Non-slip rubber end caps
INV#12761
- Features a 9 1/2" Square platform with 1 mm thick non-slip pad
- Height adjusts from 36 1/2" to 54" with line-it-up pin-locking positions every 4"
- 18" Base with application options -3 rubber feet for vibration dampening and leveling on solid flooring or 3 leveling spikes for carpeted surfaces or for pinpoint contact
INV#10638
- Great solution for ENG, EFP and other field recording applications
- Follow your sound source with ease
- Ergonomically spaced and comfortable EVA handgrips; one stationary at base of pole and a slidable handgrip for custom reach
- Three telescopic rods with easy twist and lock settings extend the boom length from 3.1-8.1'
- Standard 5/8"-27 threads with solid brass male end and internal 3/8"-16 threads
INV#10754
- Converts mic stands and accessories from 3/8" threading to 5/8"
- Knurled outer flange for ease of tightening
- For use with mic stands w/ European 3/8" threads
- Includes 2 in each package
INV#12534
- 1" Square tubing for strength and durability
- 5-Position disk clutch with bullet-nose pull knob make for quick and simple height and width adjustments
- Arm sleeves can be positioned to fit virtually any keyboard width
- Black powder coat finish
INV#11057
- Heavy-duty 600-D nylon exterior with leather accents
- 1/2" foam lined interior
- 2 exterior accessories pockets
- Heavy-duty 2-pull zippers
- 1 side carry handle
- 1 top carry handle
- Adjustable back-pack straps
- ID tag
- 2 bag hanger loops
INV#13338
- Safely and conveniently mounts two speaker cabinets to one speaker stand
- Holds 2 10" speaker cabinets with 1 3/8" inserts
- Sturdy steel construction
INV#10732
- 12 Space rack
- Includes rack mounting screws
- 75 lbs. capacity
- Black powder coat finish
INV#11185
- Metal wire A-frame design
- 5-Position width adjustment system
- Stepped yoke design accomodates for most standard electrc and acoustic guitars
- EVA Rubber pads on front bumpers protect the finish of your guitar
- Folds flat for easy storage and travel
INV#10592
