The Microflex�Multi-Element Boundary microphone delivers a unique and versatile tool for conference room installations.
Clean and simple in appearance, Multi-Element Boundary mics combine the coverage of multiple microphones into one small, compact package.
Polar Pattern MX396/C-TRI: 3 x Cardioid
Output Impedance EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration Active balanced
Sensitivity (at 1 kHz , open circuit voltage) -35 dBV/Pa (18 mV) 1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kilohms load) 122 dB
Equivalent Output Noise (A-weighted) 28 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz) 66 dB
Dynamic Range (1 kilohm load at 1 kHz) 94 dB
Common Mode Rejection (10 Hz to 100 kHz) 45 dB minimum
Preamplifier Output Clipping Level (1% THD) -7 dBV (0.5 V)
Weight Net: 0.587 kg (1.29 lbs.) Packaged: 0.916 kg (2.02 lbs.)
Logic Connections LED IN: Active low (?1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V. LOGIC OUT: Active low (?1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation -50 dB minimum
Cable 6.1 m (20 ft) attached unterminated cable with three shielded audio pairs and three shielded conductors for logic control
Environmental Conditions Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F) Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F) Relative Humidity: 0 to 95%
Power Requirements MX396/C-TRI: 48�52 Vdc phantom, 12.0 mA
|