Category:
Series:
- Semi open, circumaural studio headphone with
- Artificial leather ear pads, classic gold/black
- Trim, detachable cable
INV#70892
- Professional studio headphones with 40mm drivers
- And closed back design ideal for studio recording
- And monitoring applications. Precisely balanced,
INV#115082
- Professional studio headphones with 40mm drivers
- And closed back design ideal for studio recording
- And monitoring applications. Precisely balanced,
INV#115083
- Plug & play wireless microphone system, including
- SR40 mini single channel receiver, 1x HT40 mini
- Handheld transmitter, SMPS switched mode power
INV#195009
- Plug & play wireless microphone system, including
- SR40 mini single channel receiver, 1x HT40 mini
- Handheld transmitter, SMPS switched mode power
INV#195008
- Professional small-diaphragm, true condenser cardioid microphone
- Switchable 20 dB preattenuation pad
- Heavy-duty, roadworthy, all-metal construction
- AKG sound quality
- Designed and engineered by AKG in Vienna, Austria
INV#54588
- Extended frequency response
- Roadworthy construction
- Switchable 20 dB preattenuation pad
- Switchable bass cut filter
- Designed and engineered by AKG in Vienna, Austria
INV#51442
- Plug & play wireless microphone system, including
- SR40 mini single channel receiver, 1x HT40 mini
- Handheld transmitter, SMPS switched mode power
INV#195010
- Plug & play wireless microphone system, including
- SR40 mini single channel receiver, 1x PT40 mini
- Pocket transmitter, 1x instrument cable, SMPS
INV#195011
- Back-to-back large-diaphragm multi-pattern transducer
- True condenser technology
- High sensitivity and 155 dB maximum SPL capability
- Switchable 20 dB preattenuation pad
- Switchable bass cut filter
- Legendary AKG sound quality
- Designed and engineered by AKG in Vienna, Austria
- Comes with spider-type shock mount and aluminium carrying case
INV#51190
- AKG’s Legendary 1” Edge-Terminated Large Diaphragm Sound
- Outstanding Dynamic Range (up to 156 dB SPL, Ultra-Low Noise)
- Roadworthy Design
- Integrated Suspension to reduce mechanical Noise
- Switchable 20 dB Attenuation Pad and Low Cut Switch
- Rugged double mesh Grill for high RF immunity but unaffected Acoustics
- All-metal Die-cast body with shock- and scratch-resistant Finish
- Spider-type Shock Mount included
- Metal Carrying Case included
- Designed, Engineered and Built in Vienna, Austria
INV#52350
- High resolution 24-bit/192kHz converters
- Four-capsule mic array provides four user-friendly capture modes
- Intuitive, plug-and-play setup and operation with support for Mac® and PC, plus iOS® and Android⠢ tablets and phones
INV#245170
- Supercardioid polar pattern rejects the pit orchestra and offers an impressive gain before feedback
- hase coherent cardioid®design prevents coloration from surface sound reflections
- Finely crafted, rugged housing withstands the rigors of the stage
- Low profile to be inconspicuously placed on the stage-floor
- Industry standard stage-floor microphone
INV#11820
- Plug & play wireless microphone system, including
- SR40 mini single channel receiver, 1x HT40 mini
- Handheld transmitter, SMPS switched mode power
INV#195007
- Plug & play wireless microphone system, including
- SR40 mini single channel receiver, 1x PT40 mini
- Pocket transmitter, 1x instrument cable, SMPS
INV#195014
- Professional hi-fi stereo studio headphones
- Semi-open, circumaural design
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- Leatherette ear pads and velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
INV#51418
- Integrated flexible mount makes it even more versatile
- Large diaphragm dynamic microphone delivers accurate low frequencies
- Integrated hum-compensation coil keeps noise to an absolute minimum
- Industry benchmark for bass drum microphone used on stages worldwide for over 30 years
INV#181276
- Identical acoustics to legendary CK 1
- Precise, nearly frequency independent cardioid
- Extremely accurate signal transfer and ruler-flat on-axis frequency response
INV#29004
- Extremely rugged vocal/speech microphone
- Patented AKG Laminated Varimotion diaphragm
- Spring steel wire-mesh grill
INV#42739
- Large diaphragm studio microphone for solo vocals
- <
> solo instruments
INV#59901
- Plug & play wireless microphone system, including
- SR40 mini2 dual channel receiver, 2x HT40 mini
- Handheld transmitters, SMPS switched mode power
INV#195016
- Clip-on mic with miniature gooseneck for wind
- Instruments with mini XLR connector for use with
- B 29 L battery operated power supply, MPA V L
INV#42749
- Rugged performance microphone designed for backing vocals and instruments
- Rugged wire mesh cap with internal windscreen
- Die-cast metal body
- Complete with stand adapter and zip bag
INV#61792
- Gold-sputtered one-inch large diaphragm with patented Edge-Terminated Back-Plate Technology
- Proven performance for more than 15 years for both studio and stage
- Internal windscreen protects from wind and breath generated "pops"
- Well designed circuitry provides high SPL capability and low distortion
- Switchable attenuation pad enables for high SPL up to 150 dB
- Switchable low cut filter (500Hz, 6 dB/octave) eliminates proximity effect
- Comes complete with H 85 spider-type shock mount and metal carrying case
- Designed and engineered in Vienna, Austria
INV#58527
- Screw-on hypercardioid shotgun microphone capsule
- Module, speech optimized, only for GN / HM modules
INV#28913
- Rugged 12inch (30cm) gooseneck with integrated
- XLR connector
INV#53911
- Cardioid condenser microphone on 12inch (30cm)
- Gooseneck, phantom powering module with XLR
- Connector included
INV#92635
- Super cardioid polar pattern designed for lead vocals
- Rugged wire mesh cap with internal protective wiremesh cap
- Die-cast metal body
- Complete with stand adapter and zip bag
INV#80289
- Cardioid polar pattern
- DIfferoid®noise cancelling technology
- Outstanding gain-before-feedback and isolation
INV#11809
- Inconspicuous clip-on microphone with mini XLR
- Connector. Rugged metal housing.
INV#61985
- Absolutely perfectly matched stereo pair thanks to AKG's sophisticated computer-aided matching method
- A factory-matched pair of large diaphragm microphones for stunning, three-dimensional recordings
- Highest possible correlation over the whole frequency range and virtually identical sensitivity
- Created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method
- The cardioid-only version of the original C 414's capsule delivers AKG’s Legendary Large Diaphragm Sound
- Roadworthy Design, All-metal Die-cast body with shock- and scratch-resistant Finish
- Outstanding Dynamic Range (up to 156 dB SPL, Ultra-Low Noise)
- Switchable 20 dB Attenuation Pad and Low Cut Switch
- Comes complete with Spider-type Shock Mounts, Stand adapters, and Windscreens, a stereo pair certificate and Metal Carrying Case
- Designed, Engineered and Built in Vienna, Austria
INV#58526
- Hanging module with 33ft. non twisting cable and
- Inline phantom power adapter
INV#53631
- Cardioid condensermicrophone on 20inch (50cm)
- Gooseneck, phantom powering module with XLR
- Connector included
INV#92636
