Brand Filter:
Category Filter:
Series Filter:
USBDUALPREPS
ART USBDualPrePS- Two Channel Preamp w/ USB Software and USB cable
- Included
Series: ART Project Series
INV#58661
$79.00
MX622
ART MX622- Six Channel Personal Mixer w/ EQ, FX Loop, &
- Balanced Outputs
Series: ART Audio Utilities
INV#56684
$149.00
- Superior Preamplification for: Microphones, Instruments and Line Level Sources
- Hand Selected 12AX7a Provides 70dB of Gain Smooth, Warm and Fat Sound Quality
- Variable Input and Output Gain Controls
- Excellent as a Tube DI
- XLR and 1/4" Inputs and Outputs
- +48 volts Phantom Power
- Phase Reversal Switch
- Superior Sonic Performance to On-Board Preamps
- TEC-Award Nominated Design
- Portable, All Steel Construction
- 1 Year Warranty
Series: ART Project Series
INV#16000
$55.00
MX821S
ART MX821S- Eight Channel stereo mic/line mixer with +48v
- Phantom power
Series: ART Audio Utilities
INV#161153
$185.00
- Uniform frequency response on or off axis
- Flat from 50Hz to 20kHz within + 2dB at 6 inches
- Will handle up to 145dB SPL
- No handling noise
- High rejection of sounds to the rear of the microphone
- Rejects RFI
- Handles high sound pressure levels with high rejection of sounds to the rear of the microphone
- Incredible gain before feedback
- Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
INV#61780
$559.00
HEADAMP6PRO
ART HeadAmp6Pro- Professional Six Channel Headphone Amplifier
Series: ART Audio Utilities
INV#53107
$199.00
- 30kHz flat frequency response
- No spotlighting
- Uniform frequency response on or off axis
- More gain before feedback
- Picks up almost no sound from the rear of the microphone
- Electronics housed in microphone
- Prevents RFI
- Mini-gooseneck allows quick and easy positioning
- Comes with 30 foot balanced, twisted pair Canare cable
- Custom cable lengths available
- Does not come with XLR (order accessory C30-XLR for installed male XLR)
INV#120416
$759.00
- Mini, three-way line array element
- Hybrid™ dual 8”(200mm) LF+MF configuration
(-3dB @ 60Hz) - LF+MF – 100dB @ 1W, 1m (single cabinet)
- Twin 1” (25mm) HF horn – 106dB @ 1W, 1m (single cabinet)
- Consistent 100° (-6dB) horizontal mid and HF pattern control
- Passive or bi-amp operation
- 12 ohm system impedance, up to 4 cabinets on one amplifier channel
- Integral rigging system with variable splay angles
- 7:1 safety factor with arrays of up to 12 cabinets
- Compatible with W8LM flying frame and lifting bar
- Display™ array optimisation software
- Loudspeaker management preset files for a wide variety of configurations
Series: Install Line Array Systems
INV#142990
Call
KICKBACK KB12
HARTKE Kickback KB12- 12" HyDrive Speaker, 500 watts, Class D, 3-Band +
- Shape
Series: Hartke Kickback KB Combos
INV#180409
$449.99
- Cost effective measurement microphone
- Improved version of the SMAARTMIC™ previously offered by EAW
- Ideally suited for acoustical measurements sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
INV#50295
$499.00
- Rigid center and flex at both ends
- Uniform frequency response on or off axis
- Flat from 50Hz to 20kHz within + 2dB at 6 inches
- Will handle up to 145dB SPL
- No handling noise
- High rejection of sounds to the rear of the microphone
- Rejects RFI
- Handles high sound pressure levels with high rejection of sounds to the rear of the microphone
- Incredible gain before feedback
- Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
INV#120399
$599.00
- Hybrid® quad 8” (200mm) LF + MF configuration
- LF + MF - 102dB @ 2.83V, 1m (single cabinet)
- Quad 1” (25mm) HF, all horn loaded - 106dB @ 2.83V, 1m
- Max 131dB continuous, 137dB peak output
- Consistent 100° long throw, 120° short throw (-6dB) horizontal mid and HF pattern control
- 30° vertical differential directivity, VDQ
- Passive or bi-amp operation
- Optional yoke/spigot mount adaptor
- Compatible with WMX, WS18X and WS218X sub-woofers
Series: Differential Dispersion Series
INV#142963
Call
KICKBACK KB15
HARTKE Kickback KB15- 15" HyDrive Speaker, 500 watts, Class D, 3-Band +
- Shape
Series: Hartke Kickback KB Combos
INV#180408
$549.99
- Uniform frequency response on or off axis
- Flat from 50Hz to 20kHz within + 2dB at 6 inches
- Will handle up to 145dB SPL
- No handling noise
- High rejection of sounds to the rear of the microphone
- Rejects RFI
- Handles high sound pressure levels with high rejection of sounds to the rear of the microphone
- Incredible gain before feedback
- Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
INV#120381
$669.00
HD75
HARTKE HD75- 12" driver, 75 watt Combo, graphic EQ, FX loop
Series: Hartke HD Combos
INV#163364
$249.99
- Rigid center and flex at both ends
- Uniform frequency response on or off axis
- Flat from 50Hz to 20kHz within + 2dB at 6 inches
- Will handle up to 145dB SPL
- No handling noise
- High rejection of sounds to the rear of the microphone
- Rejects RFI
- Handles high sound pressure levels with high rejection of sounds to the rear of the microphone
- Incredible gain before feedback
- Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
INV#120398
$599.00
HD150
HARTKE HD150- 15" driver, 100 watt Combo, graphic EQ, FX loop,
- Wheels, handle
Series: Hartke HD Combos
INV#163363
$379.99
- Captures sounds with incredible precision
- Extendeded frequency response and excellent impulse response
- Intended for detailed sources
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Accurate and uncolored
- Handles sound levels up to 142dB with no proximity effect or handling noise
- Requires 48V Phantom Power
INV#98457
$1,699.00