Category:

- Choose from matching grilles, enclosures and mounting. Rings (order separately)
- Double re-entrant design provides superior audibility of voice and tone signaling
- High-efficiency, 15 watt compression driver with proven record of outstanding service reliability
- May be flange or recess mounted
- Transformer(T) equipped version for 25, 70.7, or 100V line
- Vandal and environment-resistant metal construction for outdoor or indoor use
INV#39050

- Desk Stand,. 8" 13" Height, Ebony Base, Ebony
- Tube
INV#8931

- Total Attenuation
- 4 1/2" (11.43 cm)
- 2 3/4" (6.985 cm)
- 1.50 lbs (0.68 kgs)
INV#40472

- Individually packaged for stocking & ordering convenience
- Industry standard 8" (203mm) coaxial, 16 watt, loudspeaker with high quality factory installed 8 watt line matching transformer
- Offers proven performance with wide frequency response
- Post-mounted tweeter adds strength and a more attractive appearance
INV#50509

- 4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy full range speakers or subwoofers
- Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included)
- Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications
- Extended low frequency response from the 285 cubic inch optimally tuned and ported deep drawn galvanized steel enclosure
- Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation
- Press fit" grilles blend better into contemporary architecture
- Unique "trap door" input section allows for through conduit runs with rigid or flex conduit
INV#38986

- Total Attenuation
- 4 1/2" (11.43 cm)
- 2 3/4" (6.985 cm)
- 1.20 lbs (0.54 kgs)
INV#38091

- 14 1/8" (35.8775 cm)
- 23 5/8" (60.0075 cm)
- 2.17 lbs (0.98 kgs)
INV#36390

- 10oz dual cone speaker provides familiar response & performance
- Attractive CRS white powder coat baffle with center mounted volume control
- Incorporate or remove volume control knob to suit application requirements
- Individually packaged for stocking & ordering convenience
- Quality 5 watt-dual voltage transformer
INV#49478

- 734 cubic inch enclosure for extended low frequency response
- Black epoxy finish blends with open ceiling plans
- Design enables upward, downward and side firing sound dispersion
- Innovative input panel includes combination knock-out and strain relief connector to accommodate flexible or rigid conduit
- Labor-saving hardware package - complete with new snap hanger assembly, allows quick and easy installation
- Plenum Rated
- Pre-assembled unit includes 8" dia. loudspeaker, transformer, enclosure, baffle and mounting hardware
- Suitable for use above suspended ceiling systems
- UL1480 and UL2043 Listed
INV#49330

- Total Attenuation
- 2 3/4" (6.985 cm)
- 1 3/4" (4.445 cm)
- 1.50 lbs (0.68 kgs)
INV#37032

- Ebony w/ Chrome Cover
- 38"- 62"
- 23.00 lbs (10.43 kgs)
INV#39356

- Environment Resistant for Outdoor and Indoor Use
- Grey Finish
- High-Efficiency Driver with Proven Performance Reliability
- Omni-Purpose® Bracket for Precise Positioning
- Superior Intelligibility for Voice and Tone Signaling
- Transformer Equipped for Versatile 25, 70.7, or 100V Line Applications
- World Recognized for Quality and Dependability
INV#28696

- Environment Resistant for Outdoor and Indoor Use
- Grey Finish
- High-Efficiency Driver with Proven Performance Reliability
- Omni-Purpose® Bracket for Precise Positioning
- Superior Intelligibility for Voice and Tone Signaling
- World Recognized for Quality and Dependability
INV#28697

- 4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy full range speakers or subwoofers
- Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included)
- Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg"mounting system (Included)
- Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications
- Extended low frequency response from the 285 cubic inch optimally tuned and ported deep drawn galvanized steel enclosure
- Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation
- Perfect companion with the FAPSUB subwoofer system when sub bass is required
- Press-fit grille blends perfectly into contemporary architecture
INV#40390

- 1/4" Long, 5/8"-7 Male Running Thread, Brass, No
- Plating
INV#70356

- 600-watts x 4-Channels at Rated Power
- 19" (48.3cm) with Rack Ears
- 3.5" (8.9cm)
- Operating Temperature Range
- 32 °F â 104 °F (0 °C â 40 °C)
- Storage Temperature Range
- -40 °F â 158 °F (-40 °C â 70 °C)
INV#193606

- High-Powered Compression Driver Projects Superior Voice and Tone Signaling
- Includes a 25, 70.7, 100V Transformer with a 45-Ohm Tap
- One-Step Method of Adjusting Bell from Horizontal to Vertical Positioning
- Wide-Angle Sound Dispersion for Maximum Horizontal Pattern Coverage
INV#8997

- 16 watt internal transformer
- 8 ohm transformer bypass setting
- Input via 2 pole terminal strip
- Lightweight construction makes use of additional support in drywall ceilings unnecessary
- Low profile plastic enclosure
- Press-fit grille blends perfectly into contemporary architecture
- Tile bridge include
- Tuned & ported design for extended bass response
INV#8934

- 10oz dual cone speaker provides familiar response & performance
- Attractive CRS white powder coat baffle
- Individually packaged for stocking & ordering convenience
- Quality 5 watt-dual voltage transformer
INV#36652

- FAP33T-W with White Square Edgeless Grille Kit
INV#193597

- 4 11/16" (11.90752 cm)
- 1 1/2" (3.81 cm)
- 0.05 lbs (0.02 kgs)
INV#70154

- 5/8" Long, 5/8"-27 Male Flange with 13/4" Base
- Dia., Ebony
INV#8933

- 7 7/8" (20.0025 cm)
- 5/16" (0.79502 cm)
- 0.50 lbs (0.23 kgs)
INV#69891

- Frequency Response
- 4 Position Phoenix 3.5mm Pitch
- Max. Average Power @ 50Hz-15kHz with .5% THD, 4 400W RMS
- 16.54" (420mm)
- 14.6" (422mm)
INV#169849

- 1, 2, 4, & 8 Watts
- Frequency Response
- 88dB Average, 92dB Peak
- 5.04" (12.8 cm)
- 1.71 lbs (0.77 kgs)
- Certified to Safety Listing
INV#69894

- 7 5/8" (19.3675 cm)
- 5 3/8" (13.6525 cm)
- 2.67 lbs (1.21 kgs)
INV#69888

- Convenient, externally adjustable 8, 16, & 32 watt taps in 70.7V configuration plus an 8 bypass mode
- Down firing speaker cannot collect dust or condensation and is protected by triple layer grille assembly
- Durable 8" coaxial speakers with a 360-degree horizontal dispersion pattern
- Revolutionary two-piece design allows for two-phase installation
- Shallow base for surface or shallow bed mounting
INV#112340

- 4 3/4" (12.07 cm)
- 2 15/16" (7.46 cm)
- 0.50 lbs (0.23 kgs)
INV#69821

- Frequency Response
- 7 1/8" (18.1cm)
- 7 3/8" (18.73cm)
- Certified to Safety Listing
INV#169232

- 1" Ferrofluid Cooled Dome Tweeter & Highly Efficient 4" Polypropylene Woofer
- All 1/4"-20 Hardware Inserts Allow Easy Integration of "Off The Shelf" Security Hardware
- Atlas Sound POLYGUARDT High Frequency Protection Circuit
- Color Matched Heavy-duty Zinc Chromate Plated & Powder Coated "C" Bracket (Included)
- Five-Year Warranty
- OMNIMOUNTT 10 Series Compatible
- Screwdriver Adjustable 16-Watt 70.7V/100V Transformer (may be bypassed for 8-ohm operation)
- TRX WAVEGUIDET- Constant Directivity Style High Frequency Wave Guide System
- Weather-Resistant Construction For Year-round Indoor or Outdoor Use
INV#37623

- Total Attenuation
- 4 1/2" (11.43 cm)
- 2 3/4" (6.985 cm)
- 1.00 lb (0.45 kgs)
INV#37795

- 1" FerrofluidT Cooled Dome Tweeter
- 100HR Salt Spray Test Per ASTM B117
- All ¼"-20 Hardware Inserts Allow Easy Integration of "Off The Shelf" Security Hardware
- Atlas Sound POLYGUARDT High Frequency Circuit Diverts Damaging Transient Signals to Protect the Tweeter
- Atlas Sound TRX WAVEGUIDET- A Constant Directivity Style High Frequency Wave Guide System Provides Accurate, Even High Frequency Coverage
- Color Matched Heavy-duty Zinc Chromate Plated&Powder Coated "C" Bracket (Included)
- Compact, Two-Way Loudspeaker Systems for Exceptional Performance in Sound Reinforcement Systems
- Five-Year Warranty
- Highly Efficient 5¼" Polypropylene Woofer
- OMNIMOUNTT 25 Series Compatible
- Screwdriver Adjustable 30-Watt 70.7V/100V Transformer for Distributed Sound Applications and an 8Ohm bypass
- Weather-Resistant Construction For Year-round Indoor or Outdoor Use: UV-resistant Talc Impregnated Polypropylene, Injection Molded, Weatherproof Enclosure Powder Coated Aluminum Grilles and all Brass Hardware Inserts
INV#105701

- 70.7V taps @ 1.9, 3.8, 7.5, 15, 30 & 60 Watts plus 8-ohm direct input via concealed terminal block
- 8" FA138 driver provides 100 degree (50 degree off-axis) coverage in the 2kHz octave band
- 3 Meters of 2mm Cable & Mounting Hardware Included
- Compatible with standard 3/4" ceiling fan hardware
- Outstanding full range frequency response of 55Hz to 20kHz
INV#51300

- 60 watts, w/ Transformer (70.7V), Driver
INV#8996

- 1 3/4" (4.445 cm)
- 0.77 lbs (0.35 kgs)
INV#70084

- 70.7V taps @ 1.9, 3.8, 7.5, 15, 30 & 60 Watts plus 8-ohm direct input via concealed terminal block
- 8" FA138 driver provides 100 degree (50 degree off-axis) coverage in the 2kHz octave band
- 3 Meters of 2mm Cable & Mounting Hardware Included
- Compatible with standard 3/4" ceiling fan hardware
- Outstanding full range frequency response of 55Hz to 20kHz
INV#51301