Category:

- Tri-Element Array Hanging Condenser Microphone.
- Three high quality Cardiod capsules covering 360
- Degrees with Built in RF Filter
INV#185390

- Response optimised for consistent sound quality
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#52261

- Shock absorbing base mount with flap, 3 Pin
- Female XLR Finish: Black, Gold or Nickel
INV#112237

- Cardioid condenser gooseneck microphone, Sonic
- Range, 15.2", Semi Rigid shaft, XLR termination
- With RF Filter
INV#53139

- Cardioid condenser gooseneck microphone, Sonic
- Range, 27.2", Semi Rigid shaft, XLR termination
- With RF Filter
INV#51172

- Response optimised for consistent sound quality
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53280

- Desktop cardioid paging microphone includes 2
- Switch-es, available with PTT or Latching switches
INV#94728

- Mini Shotgun hypercardioid condenser microphone
- On knuckle joint for lateral and vertical angle
- Adjustments, 10.5 , XLR termination with RF
INV#81493

- Response optimised for consistent sound quality
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53273

- Low profile through table Shock Mount, TA3F
- Connector,includes built in PPA with RF Filter
- Terminated with 3 Pin Male XLR.Finish: Satin
INV#52262

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80415

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80416

- Tri-Element Boundary layer microphone with half
- Cardioid polar pattern, built in PPA and RF
- Filter with Bi-Color Halo ring and touch
INV#117817

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80413

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80414

- Dual Element Boundary layer microphone with half
- Cardioid polar pattern, built in PPA and RF
- Filter with Bi-Color Halo ring and touch
INV#117819

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80411

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80412

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80409

- For participants at the end of a conference table
- Immuned to RF artefacts
- Boundary layer condenser microphone
- Half cardioid polar pattern
- Fully balanced
- High quality engineering in solid brass
- Non-reflextive Black Nextel or Satin Nickel
INV#80410

- Easy to install
- Low profile at surface level
- Unique ability to lock capsule away from sight when not in use
- Designed for remote switching
- Robust brass construction
- Built-in RF filter
- Supplied with 2m (6.6 ft) 2 core + screen cable
INV#80419

- Easy to install
- Low profile at surface level
- Unique ability to lock capsule away from sight when not in use
- Designed for remote switching
- Robust brass construction
- Built-in RF filter
- Supplied with 2m (6.6 ft) 2 core + screen cable
INV#80417

- Universal Phantom Power Adaptor with RF
- Filter,9V-48V, permanent install, terminal screw
- Connections.
INV#112208

- Phantom Power Adaptor, 6.4 , with knuckle joint,
- TA3F connector to XLR termination with RF Filter.
- Finish: Satin Black.
INV#112210

- 48 Rigid Shaft with Knuckle Joint. Long rigid
- Shaft and short upright shaft, connected by a
- Separate lockable swivel joint,allowing Angle,
INV#112205

- 28 Rigid Shaft with knuckle joint. Long rigid
- Shaft and short upright shaft , connected by a
- Separate lockable swivel joint,allowing Angle,
INV#112206

- 16 Semi Rigid gooseneck shaft with knuckle
- Joint, the tip is fitted with a TA3F connector.
- The bottom end is fitted with a PPA, XLR
INV#88372

- 12 Semi Rigid gooseneck shaft with knuckle
- Joint, the tip is fitted with a TA3F connector.
- The bottom end is fitted with a PPA, XLR
INV#112207

- Hypercardioid condenser Slim Line Short Shotgun
- Microphone, semi rigid shaft, 17.5 , XLR
- Termination with RF Filter Finish: Satin Black.
INV#112145

- Full flex shaft
- XLR termination with RF Filter
- Optimised for speech clarity
- Superior grade components
- Switchable Pad and Bass Filter
- Unobtrusive slim design
- Engineered in high quality brass
- Finished in satin black
INV#80407

- Slim mini shotgun
- Optimised for speech clarity
- Superior grade components
- Easy click connection with combination shafts and stands
- Engineered in high quality brass
- Finished in Satin Black
INV#53288

- Mini Shotgun hypercardioid condenser microphone,
- Semi rigid shaft, 18.3 , XLR termination with RF
- Filter.Designed for speech purposes in a wide
INV#112146

- Fitted with Tini Q connector
- Fully flexible top section to each arm
- Accepts three microphone head variants: C900, C800H or C3H
INV#53286

INV#53284

- Response optimised for consistent sound quality
- Slimline design
- Engineered in high quality brass
- Strong lightweight cable
- Fully balanced and terminated in male 3 pin XLR
- Short flexible shaft
- Knuckle for easy adjustment of vertical angle
INV#38548

- Response optimised for consistent sound quality
- Slimline design
- Engineered in high quality brass
- Strong lightweight cable
- Fully balanced and terminated in male 3 pin XLR
- Short flexible shaft
- Knuckle for easy adjustment of vertical angle
INV#58376

- For use with CA Series and S750
- Response optimised for consistent sound quality
- Superior grade components used throughout
- Easy click connection with combination shafts and stands
- Engineered in high quality brass
- Finished in Satin Black
INV#53289

- Silent reed switch and LED indicator
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53283

- Silent reed switch and LED indicator
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53279

- Silent reed switch and LED indicator
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53277

- Silent reed switch and LED indicator
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53275

- Silent reed switch and LED indicator
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53274

- Silent reed switch and LED indicator
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#53281