Category:
Series:
- Low profile, two-way, full-range coaxial ceiling loudspeaker
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 4.5 , HF 1 x ¾" compression driver
- 120 Hz - 16 kHz
- 140° conical coverage
- 92 dB SPL 1W/1m
- 60W RMS
- 8 ohm or 70V/100V operation
- Power taps (70V) 30W, 15W, 7.5W, 3.75W, bypass (8 ohm)
INV#101541
- DIST DESIGN D4LP/D4/D5 NEW CONSTRUCTION BKT QTY
- 6-PACK
INV#101518
- Two-way, full-range coaxial ceiling loudspeaker
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 6.5 , HF 1 x 1" compression driver
80 Hz - 20 kHz- 125° conical coverage
- 94 dB SPL 1W/1m
- 100W RMS, 8 ohm or 70V/100V operation
- Power taps (70V) 60W, 30W, 15W, 7.5W, bypass (8 ohm)
INV#99334
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- High fidelity, all horn loaded
- High efficiency
- Integral mounting points
- High power passive crossover
- Five-year product warranty / Fifteen-year enclosure warranty
INV#50293
- 6.5-Inch Ceilng Loudspeaker System Two-way,
- full-range coaxial ceiling loudspeaker LF 1 x
- 6.5", HF 1 x " compression driver 70 Hz - 13.5
INV#155642
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- High fidelity, all horn loaded
- High efficiency
- Integral mounting points
- High power passive crossover
- 200W, 70V autoformer
- Five-year product warranty / Fifteen-year enclosure warranty
INV#48392
- 6.5-Inch Pendant Loudspeaker System (White) White
- version of CP6-B
INV#155639
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#42035
- Hot-dipped galvanized steel
- Working Load: 50 lbs (22.7 kg)
- Design Factor - 10:1 ratio (static vertical load)
INV#72563
- U-BRACKET FOR IP-1122WR, WEATHER-RESISTANT GREY
INV#191000
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#53163
- Stainless steel
- Design Factor - 10:1 ratio (static vertical load)
INV#72561
- C6 New Construction Bracket Optional new
- construction bracket for installing C6 or C6-B
- ceiling loudspeaker in new construction before
INV#155652
- Dual 8-inch "large volume" compact subwoofer
- Low profile design
- 12 x M10 hang points
- Versatile, high performance, slim profile, small footprint
- Durable solid birch plywood enclosure
- Heavy-duty perforated steel grille
INV#103246
- Discreet and aesthetic trapezoidal enclosure
- Optimized voicing for full-range reproduction
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability in LF driver
- Terminal strip and NL4-compatible connectors
- Multiple bracket options offer affordable arraying solutions
- Included in Community’s Forecaster HD ceiling distributed
system software
INV#127323
- Three-way, 8-inch Triaxial System (Grey)
- Three-way, 80 Hz - 16 kHz, 90 H x 60 V LF 1 x
- 8", MF 2 x 2.35", HF 1 x 1" exit 400W RMS, 800W
INV#160866
- Two-way, full-range coaxial ceiling loudspeaker
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 8 , HF 1 x 1.25" compression driver
80 Hz - 20 kHz- 115° conical coverage
- 95 dB SPL 1W/1m
- 100W RMS, 8 ohm or 70V/100V operation
- Power taps (70V) 120W, 60W, 30W, 15W, bypass (8 ohm)
INV#94961
- Two-way, 12-inch, High Broadband Output System,
- 90 x 60 (Grey) Two-way, 70 Hz - 20 kHz, 90 H x
- 60 V LF 1 x 12", HF 1 x 1.4" exit 600W RMS,
INV#160860
- Transducers: LF 1 x 10” carbon ring cone; coaxial HF - 1 x 1.25” exit compression driver
- Operating Range: 70 Hz – 16 kHz
- Sensitivity (1W/1m): 97 dB
- Power Handling: 200W continuous @ 8 ohms
- Continuous Max Output: 122 dB (128 dB Peak)
- 70V/100V Autoformer: 200W, 100W, 50W, 25W (@70V only)
- Nominal Beamwidth (H x V): 90° x 90° (conical)
- Finish: Light Grey, Black or White ABS matte plastic, paintable with dual-layer powder-coated steel with NeverWet™ treated grille
- Dimensions (H x W x D): 11.0" x 13.0" x 13.5" (279 x 330 x 343 mm)
INV#153683
- Compact, two-way, full-range coaxial surface mount loudspeaker
- Infin-A-Ball™ multi-angle wall mounting bracket included
- Modern architectural design
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
INV#103229
- Two-way, full-range coaxial ceiling loudspeaker
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 10 , HF 1 x 1.25" compression driver
75 Hz - 20 kHz- 115° conical coverage
- 98 dB SPL 1W/1m
- 100W RMS, 8 ohm or 70V/100V operation
- Power taps (70V) 200W, 100W, 50W, 25W, bypass (8 ohm)
INV#99333
- VERIS Bracket - Yoke 15 (Black) U-shaped mounting
- yoke bracket for direct horizontal mounting to a
- wall or ceiling. Included vertical standoffs also
INV#77528
- Multi-tap 200W autoformer for 70V and 100V inputs
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#35666
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#42700
- Compact, two-way, full-range coaxial surface mount loudspeaker
- Infin-A-Ball™ multi-angle wall mounting bracket included
- Modern architectural design
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
INV#103230
- HIGH POWER 12in 2-WAY 90x60 WEATHER-RESISTANT GREY
INV#190988
PMB-2RR
Pole Mount Bracket, Single or Dual Loudspeakers, Vertical Downtilt and Left-to- Right panning
- Hot-dipped galvanized steel
- Working Load: 100 lbs (45.4 kg)
- Design Factor - 10:1 ratio (static vertical load)
INV#72562
- Two-way, full-range coaxial pendant mount loudspeaker
- Two (2) 15-foot pendant hang kits included for main suspension and safety cable
- Power taps (70V) 60W, 30W, 15W, 7.5W, bypass (8 ohm)
- LF 1 x 6.5", HF 1 x 1" compression driver
- 80 Hz - 20 kHz
- 125° conical coverage
- 94 dB SPL 1W/1m
- 100W RMS
- 8 ohm or 70V/100V operation
INV#103233
- Multi-tap 200W autoformer for 70V and 100V inputs
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#42719
- Discreet and aesthetic trapezoidal enclosure
- Optimized voicing for full-range reproduction
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability in LF driver
- Terminal strip and NL4-compatible connectors
- Multiple bracket options offer affordable arraying solutions
- Included in Community’s Forecaster HD ceiling distributed
system software
INV#127319
- Two-way, 6.5-inch Coaxial Loudspeaker (Grey)
- Two-way, 90 Hz - 16 kHz, 100 conical LF 1 x
- 6.5", HF 1 x 1.25" exit 150W RMS, 300W PGM, 8
INV#160871
- Three-way, 8-inch Triaxial System (Black)
- Three-way, 80 Hz - 16 kHz, 90 H x 60 V LF 1 x
- 8", MF 2 x 2.35", HF 1 x 1" exit 400W RMS, 800W
INV#160865
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
- Rotatable square horn
- Terminal strip and NL4-compatible connectors
- Mounting yoke included with 10° and 20° vertical standoffs
INV#127336
- Two-way, full-range coaxial pendant mount loudspeaker
- Two (2) 15-foot pendant hang kits included for main suspension and safety cable
- Power taps (70V) 60W, 30W, 15W, 7.5W, bypass (8 ohm)
- LF 1 x 6.5", HF 1 x 1" compression driver
- 80 Hz - 20 kHz
- 125° conical coverage
- 94 dB SPL 1W/1m
- 100W RMS
- 8 ohm or 70V/100V operation
INV#103232
- Compact, two-way, full-range coaxial surface mount loudspeaker
- Infin-A-Ball™ multi-angle wall mounting bracket included
- Modern architectural design
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 ohm or 70V/100V operation
INV#103226
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
- Rotatable square horn
- Terminal strip and NL4-compatible connectors
- Mounting yoke included with 10° and 20° vertical standoffs
INV#114976
- DYNA-TECH™ driver protection circuitry
- Patented Cool-Coil™ heat evacuation technology to minimize cone driver power compression
- Eight M10 threaded rigging fittings (four on each end panel)
- Built-in Ergo-Grip™ handles (two on each end panel)
- Terminal strip and NL4-compatible connectors
INV#127305
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
INV#42984
- Ceiling mount subwoofer system
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 10
- 60 Hz - 160 Hz
- 180° conical coverage
- 93 dB SPL 1W/1m
- 100W RMS, 8 ohm or 70V/100V operation
- Power taps (70V) 200W, 100W, 50W, 25W, bypass (8 ohm)
INV#101533
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
- Constant-directivity rotatable square horn
- Frequency shaded woofers for smooth vertical pattern control
- Terminal strip and NL4-compatible connectors
INV#127329
- Two-way, 10-inch Coaxial Loudspeaker (Black)
- Two-way, 70 Hz - 16 kHz, 90 conical LF 1 x 10",
- HF 1 x 1.25" exit 200W RMS, 400W PGM, 8 ohms,
INV#160868
