Category:
Series:
- There are two control options available to operate the FLEX RGB tape.
- Option 1
An infrared wireless controller system to change colors which allows you to select 16 static colors or run color fades plus 2 intensity settings. - Option 2
A DMX driver that will give you 3 DMX channels and allow you to use the DMX controller of your choice. This will allow you to create specific colors, 0-100% dimming and program intensity levels of your choice. Needed items Elar Driver 1 and S-150-12.
INV#171428
- MIDI mode: receives MIDI notes 001 128
Chase programs may be set to Fade-In & Fade-Out
Digital display shows current program - MIDI In & MIDI Through connections
DMX In & Out connections
INV#171665
- 12 position dipswitch for function set up
- DMX and Stand Alone operation modes
- 7 built in programs
INV#171601
- 4-way DMX distributor
- 19" rack mountable - single space
- 1 x DMX input, 4 x DMX outputs&1 DMX thru
INV#171273
- Pro Series DMX Cables
- Heavy duty connectors
INV#172445
- Built-in Air Pump: Produces dry haze and includes self cleaning function.
On Board DMX Modes when connected to a DMX Console: - DMX Console OFF: Unit runs self clean process and automatically turns off.
DMX Console ON: Unit turns ON and starts to heat up automatically. - Wide Fluid Channel: 0.17" (4.4mm) diameter reduces percentage of clogging problems.
INV#171130
- 8 Way DMX Data Splitter
- Fully DMX-512 (1990) Compliant
- Buffers and Distributes DMX Data Reliably
INV#171272
- 3°Sharp Pin Spot Beam
CTO and CTB Color Correction - 8 Facet Rotating Prism and Frost Effects
Super Fast 16 bit 3-Phase Pan and Tilt Motors - Flicker Free Operation for TV and FILM
Internal EWDMX Wireless DMX Receiver
Remote Device Management Protocol Support
INV#171265
- Includes 1x 3-pin male DMX Terminator and 1x 5-pin DMX terminator
- It is recommended to use a DMX Terminator at the end of any DMX run
INV#176050
- 6 x Volt Q5E 10W RGBW Cree LED battery operated
- Wireless dmx fixtures in charging case
INV#171156
