Category:
Series:
- 12” woofer for low-end punch in a compact enclosure and 1.5” high-frequency titanium compression driver
- 55 Hz – 20 kHz frequency range
- 250 W continuous and 1000 W peak power handling
- 95 dB SPL sensitivity; 125 dB max SPL
- 32.8 lbs (14.9 kg)
INV#148743
- 1000 W (Class D); 126 dB max SPL; 50 Hz – 20 kHz
- 12” woofer and 1.5” high-frequency titanium compression driver
- 34.3 lbs (15.6 kg)
INV#148818
- Part - Column speaker sub
- Clean, compact design - built to blend in
- Easy transport and setup
- Real PA performance
- Wide, even coverage
- Highâ quality Bluetooth® audio
- Wireless control and monitoring via the new Bluetooth® QuickSmartMobile app
- QuickSmartDSP provides bestâ inâ class processing via EV's signature singleâ knob user interface with LCD
INV#220449
- Part - Column speaker array
- Clean, compact design - built to blend in
- Easy transport and setup
- Real PA performance
- Wide, even coverage
- Highâ quality Bluetooth® audio
- Wireless control and monitoring via the new Bluetooth® QuickSmartMobile app
- QuickSmartDSP provides bestâ inâ class processing via EV's signature singleâ knob user interface with LCD
INV#220450
- For use with SoundMate Transmitters
- Includes beltclip
INV#104290
- Variable-D® dynamic microphone
- True cardioid with no coloration at 180-degrees off-axis
- Voice tailored frequency response
- Studio condenser-like performance
- Large diaphragm
- Humbucking coil
- Bass roll-off switch
INV#6605
- 15” woofer for extended low-frequency response and 1.5” high-frequency titanium compression driver
- 44 Hz – 20 kHz frequency range
- 250 W continuous and 1000 W peak power handling
- 96 dB SPL sensitivity; 126 dB max SPL
- 36.5 lbs (16.6 kg)
INV#148742
- Weather-resistant
- 60 degree x 40 degree dispersion pattern
- Integral swivel bracket
- 30-watt, 70/100-volt version
INV#32502
- 2-Way Full-range
- Vented LF enclosure
- 1.25” voice coil (titanium diaphragm)
- PRO™ Driver protection circuit
- HF-horn features Varipath™
- Trapezoidal (25° per side)
- 4 x M8x1.25 attachment inserts
INV#5661
- Designed for Commercial Sound/Life Safety, and other applications
- For use where a flush-mount design is desired but demand for high-quality audio exists
- Specially tuned enclosure
- 8” woofer
- 1” waveguide-coupled tweeter for coverage up to 18 kHz
- Four-point mounting system
- Mounting support ring and tile rails included
- No additional accessories needed for most installations
INV#34526
- Compact power for sound reinforcement and stage monitoring
- 90° x 50° coverage-pattern waveguide
- 60° Monitor Angle
- 94 dB SPL sensitivity; 132 dB max SPL
- Braced 15mm plywood enclosure
- Pole mount or stack with Live X Subwoofers
- Black textured finish
INV#81698
- Designed for Commercial Sound/Life Safety, and other applications
- For use in high-ceiling, reverberant “problem” rooms
- Exclusive ported, wave-guide coupled 8” driver
- Four-point mounting system
- Mounting support ring and tile rails included
- No additional accessories needed for most installations
- Patent-pending design
INV#29461
- 2-Way Full-range
- High Sensitivity
- Ultra-linear frequency response
- Vented LF enclosure
- 1.25” voice coil (titanium diaphragm)
- PRO™ Driver protection circuit
- HF-horn features Varipath™
- Trapezoidal (25° per side)
- 4 x M8x1.25 attachment inserts
INV#32500
- Variable-D™ pattern control minimizes positional and off-axis tonal shifts
- Integrated humbucking coil and integral pop filters provide virtually noiseless performance
- Unique dual-voicing switch selects from two response curves
INV#92661
- Switchable omni, cardioid, supercardioid or hypercardioid polar patterns
- Mute switch with LED can be programmed as either push on/off or push-to-mute
- Smooth and uniform frequency response, no matter what pattern is selected
- Extended low-frequency response and switchable high-pass filter
- Sturdy steel base
INV#36343
- 2-Way Full-range
- Vented LF enclosure
- 1.25” voice coil (titanium diaphragm)
- PRO™ Driver protection circuit
- HF-horn features Varipath™
- Trapezoidal (25° per side)
- 4 x M8x1.25 attachment inserts
INV#29642
- Two-way, high-output full range
- Vented LF enclosure
- 1” voice coil (titanium diaphragm) with Neodymium magnetic structure
- HF section features Coherent Coverage Waveguide™ to minimize interference
- Full bandwidth overload protection for HF and LF
- Three-dimensional ellipse (for compact look)
- Magnetically shielded for video applications
- Comes with Strong Arm Mount (SAM™) and a hex-key
- Suspension insert for SAM™, safety point on rear side
INV#34797
- Windscreen for PolarChoice gooseneck mics.
- Provides additional protection from 'p' pops and
- Wind noise.
INV#49621
- Designed for Pro Music, and other applications
- 18” woofer provides extended low-frequency output
- 32 Hz – 200 kHz frequency range 96 dB SPL sensitivity; 134 dB max SPL
- 00 W Class D lightweight amplifier—runs cool without fans
- Rugged wood cabinet—supports pole-mounted or stacked configurations
INV#81697
- QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD
- Cardioid Control Technology allows output to be steered towards the audience with up to 35 dB reduction on stage when multiple subs are deployed
- High-efficiency 1300 W Class D power amplifier delivers up to 134 dB peak SPL on the EKX-18SP utilizing high-sensitivity transducers designed and engineered by EV
- Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions
- Two XLR outputs for easy system expansion to additional loudspeakers or subwoofers. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two on the 18SP). M20 threaded pole mount plate
INV#177814
- Wired boundary multi-pattern condenser mic. Mic
- On/off switch, mic status LED.
INV#69097
- EV8L weatherized woofer
- DH2005 true compression driver
- Weatherized for indoor and outdoor use
- “Clickn’ Mount” Quick SAM mounting system for wide range of motion included
- 4-pin detachable Phoenix-style connector
INV#37744
- High Sensitivity, Low-Distortion Transducer Design
- Professional-Grade Components and Testing
- Best-in-Class Processing and Control
- 18 inch LF SMX woofer
- 1800 W Class D power amplifier with integrated FIR Drive DSP
- 135 dB peak SPL
- Special DSP preset for true cardioid performance across the full operating bandwidth
- Combo pole cup (insert and threaded) for use with the ETX two-way models
- Removable casters
INV#160788
- ELX115 performance with self-amplification
- 44 Hz – 20 kHz frequency range
- Lightweight, cool-running 1000 W Class D amp
- Biamped with 24 dB/octave crossover
- Transducer protection
- Bypassable high-pass for external subwoofer
- XLR, TRS, and RCA connections
- Versatile gain, mixing, and processing controls
- Pre- or post-mix parallel outputs
INV#81696