Category:
Series:

- 2-way Active Line Array Column-6x4 +4x1
- -400Wrms+100Wrms Wh. RAL9016
INV#180306

- 12” coaxial woofer with 2.5” coil and 1” HF driver with 1.7” coil on conical 90° horn
- 100V line transformer with selectable 200W/100W power tapping
- Sturdy molded polyethylene curved enclosure
- Steel U bracket and other included hardware accessories
- 4 wires cable to select the desired power tapping
- Water-stop grill with 3 layers of protection
- IP55 weather resistant
- Standard grey finish
- RAL 7011
INV#177045

- 8” coaxial woofer with 2” coil and 1” HF driver with 1.4” coil on conical 90° horn
- 100V line transformer with selectable100W/50W power tapping
- Sturdy molded polyethylene curved enclosure
- Steel U bracket and other included hardware accessories
- 4 wires cable to select the desired power tapping
- Water-stop grill with 3 layers of protection
- IP55 weather resistant
- Standard grey finish
- RAL 7011
INV#177044

- 600W 131 / 135dB SPL Processed Active Subwoofer
- Compact band-pass design subwoofer with high SPL and punch
- 380 mm (15”) high excursion woofer with 75 mm (3”) voice coil, custom made for FBT
- Frequency response from 38Hz to 120Hz
- 600W RMS Class D power amplifier with switch mode power supply
- Digital Signal Processor with 4 presets, 2 equalization with 2 LPF Crossover Settings
- Control Panel with Stereo combo XLR/Jack in/outs, Stereo XLR HP-filter outs, Volume, EQ Presets, Phase Reversal Switch 0°-180°, 3 status LED indicators
- 15mm (5/8”) Baltic birch plywood cabinet with scratch & scuff resistant paint finish
- M20 (20mm) top mount speaker stand socket, two aluminum carrying handles
- Very Lightweight, only 31.5 Kg, (70 lb)
- Provides additional low frequency reinforcement when used along with 2 – way EvoMaxX speakers
INV#112078

- Top to Bottom Mt. black steel Wall Bracket: Pro
- Maxx 12/12a Pro Maxx 14/14a
INV#112081

- 1 to 1 3/8 Adapter - for mounting Jolly 8
- Speakers to Speaker stands w/ 1 3/8 shaft
INV#112074

- Flyable POWERED Line Array Subwoofer 2 x 12 B&C
- Custom neodymium woofers with die cast aluminum
- Frame & 3 voice coil, 138 dB Max. SPL Class D
INV#112025

- 2 way POWERED Biamped Line Array Polypropylene /
- Aluminum Cab 2 x 6.5 B&C custom neodymium
- Woofers, 1 x 2.5 B&C HF compression driver with
INV#112026

- Flyable compact 18" subwoofer, can be hung
- Forwards or rearwards - 1200Wrms
INV#191501

- 2-way amplified system in Bass-Reflex enclosure
- 8" high efficiency and high excursion custom speaker
- 1" custom compression driver
- 150Wrms class G amplifier for low frequencies
- 50W rms class AB amplifier for high frequencies
- 90°H x 60°V constant directivity horn
- ADAP® (Advanced Dynamic Active Protection) processor to limit overload
- Polypropylene enclosure with integrated handle, 2 x M6 anchoring points, 25mm (1”) pole mount socket
INV#52674

- 2-way, 8 Ohm, 50W+25W recomm amp, 5" cone, 1"
- Dome, conical 90 horn, IP 55, water proof
- Grill/int. circuitry, full UV protect, 100V line
INV#183426