Category:
Series:

- The new design of the HS7 includes the convenient mic stand insert on the bottom of the unit. This
allows a quick setup on top of a mic stand, with the HS7 angled upward for accurate vocal monitoring. - The included mic stand adaptor insures a more stable and secure placement on any mic stand.
- Molded-in yoke bracket points. With the optional yoke bracket assembly the HS7 can be mounted to
a wall or ceiling, or attached to a mic stand. - Microphone boom attachment on top of the HS7 eliminates the need for a second mic stand for your
microphone. (Requires optional hardware). - Integrated handle into the top of the enclosure.
- Each Hot Spot 7 comes equipped with two Twist-lock 1/4" Combo speaker jacks, all of which are wired in parallel to allow easy "daisy chaining'
of multiple Hot Spots. - Mounts to the top of the PA6S, PA6SR, OR HS7
- Allows mic boom to be mounted on top of the unit.
- Works With 3/8" & 1/2" mic booms
- The new design of the HS7 includes the convenient mic stand insert on the bottom of the unit. This
allows a quick setup on top of a mic stand, with the HS7 angled upward for accurate vocal monitoring. - The included mic stand adaptor insures a more stable and secure placement on any mic stand.
- Molded-in yoke bracket points. With the optional yoke bracket assembly the HS7 can be mounted to
a wall or ceiling, or attached to a mic stand. - Microphone boom attachment on top of the HS7 eliminates the need for a second mic stand for your
microphone. (Requires optional hardware). - Integrated handle into the top of the enclosure.
- Each Hot Spot 7 comes equipped with two Twist-lock 1/4" Combo speaker jacks, all of which are wired in parallel to allow easy "daisy chaining'
of multiple Hot Spots. - Mounts to the top of the PA6S, PA6SR, OR HS7
- Allows mic boom to be mounted on top of the unit.
- Works With 3/8" & 1/2" mic booms
INV#66896

- 3" 4 ohm Driver
- Stand / Bracket Mountable with included NSPA Bracket Kit
- 2 band EQ
- XLR Input: 4.4 k Differential Balanced
- 1/4" Input: 10 k Balanced/Unbalanced
- 1/8" Input 22 k Balanced (11 k Unbalanced)
- Power LED
- Signal LED
- Compressor LED
INV#112895

- Yoke Bracket and hardware kit for HS7 and PA6S.
- Will allow for mounting to wall or mic stand
- (stand adaptor not included with bracket, but
INV#181333

- CHECK MATE CALIBRATOR: conforms to IEC 60942 2003
- Class 2, weighs .41lbs, calibration level 94dB &
- 114 @ 1kHz, fits, 1", 1/2", & 1/4" diameter mic
INV#56883

- CRICKET POLARITY TEST SET: Checks continuity and
- Polarity; TRS and XLR in/out; Tests speakers,
- Mics, cables and wireless systems; Tests mixers
INV#37555

- 8" woofer, 1" comp driver, built in handle, 200
- Watts, 4 M8 T-Nuts, 75-17.5kHz, bass boost,
- Unique wedge shape, speaker stand socket, 10.5" x
INV#197810

- PSE/52HS HEADSET SYSTEM: 16 channels; includes 1
- PSER Receiver, 1 MBP52 Transmitter,
- Uni-directional headset mic (AS-HS-U3BK), rack ear
INV#112548

- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Low Cost High Performance
- MAX Function
- Level Range Display
- Resolution 0.5 dB
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
INV#39349

- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- 96 Selectable Channels
- Battery Indicator
- Rechargeable Devices
- Works with most brands of Video Camera
- Choose from 4 different transmitter options.
- Mini Size
- Low Cost High Performance
- MAX Function
- Level Range Display
- Resolution 0.5 dB
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
- Mini Size
- Low Cost High Performance
- MAX Function
- Level Range Display
- Resolution 0.5 dB
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
- Mini Size
- Low Cost High Performance
- MAX/MIN Function
- Level Range Display
- AC Signal Output
- Resolution 0.1 dB
- IEC 651 Type II, ANSI S1.4 Type II
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
- Mini Size
- Low Cost High Performance
- MAX/MIN Function
- Level Range Display
- AC Signal Output
- Resolution 0.1 dB
- IEC 651 Type II, ANSI S1.4 Type II
- Conforms to IEC 60942 2003 Class 2 and
ANSI S1.40-1984 - Calibration levels of 94dB and 114dB at 1kHz
- Fits 1", 1/2" and 1/4" diameter microphones
- Weight: approx .41lbs (186.4g) (including battery)
- Accurate and simple to use
INV#112856

- Lightweight Bodypack style Transmitter with easy
- On/Off Button as well as Mute. Built in LCD
- Screen shows battery indication and 96 selectable
INV#197784

- MIC BOOM ADAPTOR: mounts to the top of a PA6S,
- PA6SR, or HS7. This adaptor allows most
- Microphone booms to be mounted on top of the Hot
INV#98722

- The new design of the HS7 includes the convenient mic stand insert on the bottom of the unit. This
allows a quick setup on top of a mic stand, with the HS7 angled upward for accurate vocal monitoring. - The included mic stand adaptor insures a more stable and secure placement on any mic stand.
- Molded-in yoke bracket points. With the optional yoke bracket assembly the HS7 can be mounted to
a wall or ceiling, or attached to a mic stand. - Microphone boom attachment on top of the HS7 eliminates the need for a second mic stand for your
microphone. (Requires optional hardware). - Integrated handle into the top of the enclosure.
- Each Hot Spot 7 comes equipped with two Twist-lock 1/4" Combo speaker jacks, all of which are wired in parallel to allow easy "daisy chaining'
of multiple Hot Spots. - Mounts to the top of the PA6S, PA6SR, OR HS7
- Allows mic boom to be mounted on top of the unit.
- Works With 3/8" & 1/2" mic booms
- The new design of the HS7 includes the convenient mic stand insert on the bottom of the unit. This
allows a quick setup on top of a mic stand, with the HS7 angled upward for accurate vocal monitoring. - The included mic stand adaptor insures a more stable and secure placement on any mic stand.
- Molded-in yoke bracket points. With the optional yoke bracket assembly the HS7 can be mounted to
a wall or ceiling, or attached to a mic stand. - Microphone boom attachment on top of the HS7 eliminates the need for a second mic stand for your
microphone. (Requires optional hardware). - Integrated handle into the top of the enclosure.
- Each Hot Spot 7 comes equipped with two Twist-lock 1/4" Combo speaker jacks, all of which are wired in parallel to allow easy "daisy chaining'
of multiple Hot Spots. - Mounts to the top of the PA6S, PA6SR, OR HS7
- Allows mic boom to be mounted on top of the unit.
- Works With 3/8" & 1/2" mic booms
INV#128367

- Dynamic handheld transmitter for the Traveler
- Series. This handheld features over 96
- Selectable channels, built in LCD with battery
INV#197783

- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
INV#177537

- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
INV#112606

- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
INV#177538

- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
INV#112599

- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
INV#177539

- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- Mounts two AS-1800 transmitters side by side in one rack space
- Allows for Front Mounting the Antennas
- 1 Rack Space
INV#112601

- PSE/HH52 HANDHELD SYSTEM: 16 channels; includes 1
- PSER Receiver, 1 HH52 Dynamic Mic/Transmitter,
- Rack ears
INV#112554

- PSE/52LV LAV SYSTEM: 16 channels; includes 1 PSER
- Receiver, 1 MBP52 transmitter, lav mic
- (AS-LV-U3BK), rack ears
INV#112550

- PSE/52GTR GUITAR SYSTEM: 16 channels; includes 1
- PSER Receiver, 1 MBP52 Transmitter, guitar cable,
- Rack ears
INV#112552

- POWER SUPPLY: For PSER, DHTR,TRCR, 900, 1100, &
- 1500 13.5 V 300mA
INV#112670

- TV5X HAND/SHOULDER CARRY 1 REC; SATELLITE: TV5X
- Satellite speaker. w/1 rec . Hand/Shoulder carry
- Style 40 watts RMS 5'' neodymium full range
INV#162550

- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
- Mounts one AS-900 or one AS-1100 Receiver
- Allows for Front Mounting Antenna
- 1 Rack Space
- BNC Connection
- Allows for Front Mounting Antenna
- 13.5 Volt 300 mA-
- 5.5mm PLUG
INV#112303