Category:
Series:
CONTROL 26CT
6.5" Ceiling Loudspeaker Assembley with Transformer
- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking.
- Coaxially mounted 165 mm (6.5 in) woofer with butyl rubber surround and 19 mm (.75 in) titanium coated
- High power, wide frequency response and low distortion for high sound level capability
- Screw locking barrier strip termination
Series: Ceiling Spkr
INV#28210
HPD8128
8" 8100 Series Ceiling Speaker- Clear, high-fidelity performance
- Dog-ears for easy blind mounting
- 90 degree Coverage
- Bare wire termination
Series: Ceiling Spkr
INV#53687
- 110 W transformer for 70 V or 100 V lines, with 8 Ohm thru
- Extended bandwidth, extremely smooth frequency response
- 110° x 85° HF coverage, rotatable horn
- SonicGuard™ overload protection
- 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver
- Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket
- Sealed input panel cover and screwdown input terminals
Series: Surface-Mt Speakers
INV#9926
CONTROL 24CT MICRO
4.5" Micro Ceiling Speaker with Transformer- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking
- Extremely wide 150™ coverage
- Shallow 4 in (100 mm) depth
Series: Ceiling Spkr
INV#34329
- RBI Radiation Boundary Integrator Technology
- 120° conical coverage
- 5.25" (130 mm) low-frequency with silk-dome tweeter for high-fidelity sound quality
- 75 Watts, 8 ohms and 60W multi-tap transformer
Series: Pendant Spkr
INV#70917
CONTROL 26C
6.5" Ceiling Loudspeaker Assembley- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking
- Screw locking barrier strip termination
- High power, wide frequency response and low distortion for high sound level capability
Series: Ceiling Spkr
INV#28650
- Packaged with grille, backcan and tile rails
- Wide coverage allows fewer speakers
- Coaxially mounted 100 mm (4 in) woofer with butyl rubber surround and 19 mm (.75 in) titanium coated diffraction-loaded tweeter
Series: Ceiling Spkr
INV#9438
CONTROL 226C/T
6.5" Coaxial Ceiling Loudspeaker with HF Compression Driver- Consistent 120° broadband pattern control for exceptional coverage
- Coaxial design featuring: Kevlar-reinforced 165 mm (6.5 in) woofer. 25 mm (1 in) compression driver.
- Extraordinary clarity for speech and vocals with extended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille
Series: Ceiling Spkr
INV#42495
- RBI Radiation Boundary Integrator Technology
- 120° conical coverage
- 5.25" (130 mm) low-frequency with silk-dome tweeter for high-fidelity sound quality
- 75 Watts, 8 ohms and 60W multi-tap transformer
Series: Pendant Spkr
INV#90846
- 110 W transformer for 70 V or 100 V lines, with 8 Ohm thru
- Extended bandwidth, extremely smooth frequency response
- 110° x 85° HF coverage, rotatable horn
- SonicGuard™ overload protection
- 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver
- Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket
- Sealed input panel cover and screwdown input terminals
Series: Surface-Mt Speakers
INV#29718
CONTROL 24C
Control Contractor 4" Coaxial Ceiling Speaker- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking
- Wide coverage allows fewer speakers
- Coaxially mounted 100 mm (4 in) woofer with butyl rubber surround and 19 mm (.75 in) titanium coated diffraction-loaded tweeter
Series: Ceiling Spkr
INV#39255
- RBI Radiation Boundary Integrator Technology
- 120° conical coverage
- 6.5" (165 mm) low-frequency with silk-dome tweeter for outstanding sonic fidelity
- 75 Watts, 8 ohms and 60W multi-tap transformer
Series: Pendant Spkr
INV#90844
- 1000 W highly efficient Class-D amplification
- Bluetooth Control: 3 Parametric EQs + Hi & Lo Shelf, Gain and Delay, Save and Recall settings
- 3 x M10 Suspension Points
- Standard 35mm pole cup with stabilizing screw
- Lightweight, rugged polypropylene enclosure
Series: EON
INV#165337
- Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback sound levels more consistent
- Components: Sixteen 25 mm (1 in) soft dome tweeters and four 125 mm (5 in) high-power LF drivers, arranged coaxially
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection of HF devices
- Swivel (pan) / tilt wall bracket included
Series: Column Spkr
INV#99778
- Enclosure designs have been optimized for ideal acoustic resonance taking advantage of injection molding techniques and mechanical shaping of the enclosures
- JBL Waveguide Technology
- Bluetooth integration
Series: EON
INV#161370
- 1000 W highly efficient Class-D amplification
- Bluetooth Control: 3 Parametric EQs + Hi & Lo Shelf, Gain and Delay, Save and Recall settings
- 3 x M10 Suspension Points
- Standard 35mm pole cup with stabilizing screw
- Lightweight, rugged polypropylene enclosure
Series: EON
INV#165336
- 150 Watts Continuous Power Handling
- Professional Drivers and Crossover Network
- Included Mounting Bracket
- Transparent and Faithful Sonic Performance
- Magnetically Shielded Transducers
- SonicGuard™ Overload Protection
Series: CONTROL SERIES
INV#42701
- JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
- JBL 2414H-C 25 mm (1 in) polymer diaphragm
compression driver improves high frequency
performance as well as system reliability. - The advanced network topology crossover design shapes
frequency response and delivers "coherent summation"
in the crossover region. - <
>High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. - Progressive Transition<
> high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response. - The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard<
> protects the high frequency driver from excess power without interrupting the performance. - Non-resonant, all-steel handles are used.
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
- Dual-angle pole-mount socket allows the speaker to tilt 10<
>for more uniform audience coverage.< >
Series: JRX SERIES
INV#153759
- Highly weather-resistant IP56 rating
- Consistent 120° x 120° broadband pattern control
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection
- 80 Hz – 20 kHz frequency response.
- 200 Watt 70V/100V multi-tap (built-in transformer) direct 8 low-impedance.
Series: Surface-Mt Speakers
INV#114810
- 90° x 50° coverage
- Dual-angle pole socket for applications requiring tripod mounting
- Heavy Duty 16 gauge protective screen backed steel grille
- Tough DuraFlex™ enclosure finish
- SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance.
Series: PRX PASSIVE
INV#102218
- 90° x 50° coverage for even and smooth response on and off axis
- Dual-angle pole socket for applications requiring tripod mounting
- Heavy Duty 16 gauge protective screen backed steel grille
- Tough DuraFlex™ enclosure finish
- Utilizes twelve M10 suspension points for safe deployment in light duty installations
- SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance
Series: PRX PASSIVE
INV#102217
- Clear sound from an 8 inch dualcone full-range driver.
- Installs to in-ceiling backboxes having 4 mounting points on an 11.25" (286 mm) diameter mounting circle.
- For use with MTC-81BB8 backcan and MTC-81TB8 tile bridge
Series: Ceiling Spkr
INV#58310
- Highly weather-resistant IP56 rating
- Consistent 90° x 90° broadband pattern control
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection
- 55 Hz – 20 kHz frequency response.
- 200 Watt 70V/100V multi-tap (built-in transformer) direct 8 low-impedance.
Series: Surface-Mt Speakers
INV#114817
VRX932LA-1
12" Two-Way Line Array Loudspeaker System
- JBL’s exclusive neodymium magnet Differential Drive® woofer for high-power capacity and light-weight.
- VRX932LA-1 features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
- Constant Curvature waveguide for unprecedented array coherence.
- Dual angle pole socket for aiming flexibility. One or two speakers may be mounted to a 35 mm pole or tripod stand.
- Integral rigging hardware for simple connection of enclosures and optional array frame. Arrays of up to six enclosures may be flown.
- Array Configuration Selector permits “array shading” in passive mode.
Series: VRX SERIES
INV#37883
- Asymmetrical vertical coverage sends more sound toward far area of room to make front-toback sound levels more consistent
- Components: Sixteen 25 mm (1 in) soft dome tweeters and four 125 mm (5 in) high-power LF drivers, arranged coaxially
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
- Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for long-throw applications
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection of HF devices
- Swivel (pan) / tilt wall bracket included
Series: Column Spkr
INV#99777
HPD8124
4" 8100 Series Ceiling Speaker- Clear, high-fidelity performance
- Dog-ears for easy blind mounting
- 130 degree Coverage
- Bare wire termination
Series: Ceiling Spkr
INV#53686
- JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
- JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
- The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
- Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
- The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
- SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
- Non-resonant, all-steel handles are used.
- Attractive 18-gauge perforated, steel grille protects components from damage.
- Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage.
Series: JRX SERIES
INV#153758
CONTROL 126WT
Control Contractor 6.5" In-Wall Speaker (70V)- 165 mm (6.5 in) polymer-coated aluminum-cone woofer with pure butyl rubber surround
- 25 mm (1 in) pure-titanium dome low diffraction swivel aimable titanium tweeter
- High-slope crossover for natural midrange sound
- Extended bandwidth performance of 38 Hz – 20 kHz
- 50 W continuous (100 W program, 200 W peak) power handling (126 W)
Series: In-Wall Sprk
INV#40717
- Splayed Tweeters
- Wall Facing Woofer
- Controlled sound
- Hemispherical Soundfield Technology
Series: Surface-Mt Speakers
INV#177788
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- Dynamic SonicGuard™ overload protection
- Built-in 70V/100V transformer, plus 8 ohm direct capability
- Swivel (pan) / tilt wall bracket included
Series: Column Spkr
INV#99776
NCSA240Z-U-US
CS Series 2 Channel Amplifier, 2 x 40W
- 2 x 40 watt channels
- Built-in 70V and 100V
- Universal power supply
- Fanless, space-saving 1U design
- Sleep mode disable function
- Energy-efficient amplifier
- Sleek industrial look with illuminated rings making knobs easy to see and use
- Supports the JBL CSR-V wall controller via Ethernet cable
- Energy Star® Certified
Series: COMMERCIAL AMPLIFIER
INV#163092
- Video shielded for use near video monitors
- Extremely smooth frequency response
- Stainless steel grill for harsh environments
- 60 W transformer for 70 V or 100 V lines, with 8 ohms thru
- SonicGuard™ overload protection
- 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter
- Includes InvisiBall® mounting hardware and sealed input panel cover
- Screw-down input terminals
- 100° x 100° high frequency horn
Series: Surface-Mt Speakers
INV#9927
- Video shielded for use near video monitors
- Extremely smooth frequency response
- Stainless steel grill for harsh environments
- 60 W transformer for 70 V or 100 V lines, with 8 ohms thru
- SonicGuard™ overload protection
- 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter
- Includes InvisiBall® mounting hardware and sealed input panel cover
- Screw-down input terminals
- 100° x 100° high frequency horn
Series: Surface-Mt Speakers
INV#42865
- 1” Exit Compression Driver with 90° x 50° Coverage PT™ Waveguide
- 205 mm (8 in) LF transducer
- Compact enclosure
- 750W Program
- Dual Neutrik NL4 connectors plus screw terminal
- Attachment points for optional U-bracket, third part OmniMount® type bracket and stand mount accessory
Series: AE SERIES
INV#52526
- 100° x 100° Coverage
- PT™ Progressive Transition™ Waveguide for good pattern control with low distortion
- Bi-Amp / Passive Switchable
- Optional U-Bracket Model MTU-4
- Optional planar array frame kit PAF-2K 3-wide array with ASB6118 subwoofer center
- For fixed installation applications requiring a compact cabinet, such as lecture halls, corporate learning centers, small performing arts facilities, theatrical sound design, auditoriums, sports facilities and themed entertainment venues
Series: AE SERIES
INV#50596
- RBI Radiation Boundary Integrator Technology
- Well-controlled 75° coverage for excellent clarity in high-ceiling and reverberant locations
- 6.5" (165 mm) low-frequency with silk-dome tweeter for outstanding sonic fidelity
- High 93 dB sensitivity
- 75 Watts, 8 ohms and 60W multi-tap transformer
Series: Pendant Spkr
INV#80379
NCSMA2120-U-US
CS Series 8 Channel Mixer-Amp, 2 x 120W- 2 x 120 watt channels
- 8 input mixer
- Remote volume with optional CS-RV
- Ideal for commercial and industrial use
- Fanless, space-saving 1U design
- Sleek industrial look with illuminated rings, making them easy to see and operate
- Euro-block type mic/line input connectors and output connectors
- Independent Bass and Treble controls for each output channel
- Priority muting
- Configurable output routing
- Utilizes Crown’s DriveCoreTM technology providing excellent audio performance with high efficiency
- Manufactured to lead-free ROHS standards, utilizing recycled metals, and using an energy-saving powder coat process
- Includes rack mounting kit
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
- Energy Star® Certified
Series: COMMERCIAL MIXER-AMP
INV#155723
PRX418S
PRX400 Series 18" Subwoofer- Tough DuraFlexT finish enclosure
- Heavy Duty 16 gauge protective screen backed steel grille
Series: PRX PASSIVE
INV#102220
- Packaged with grille, backcan and tile rails for fast installation and easy stocking
- Component: Long excursion 200 mm (8 in) driver
- Simple installation and wire connection method
Series: Ceiling Spkr
INV#36219
- Constant Curvature Array - The waveguide mounts two compression drivers on a continuous arc enabling them to work together acoustically as if they were a single driver.
- Amplitude Shading- Convenient series of switches on each enclosures that controls the output of each high frequency section in the array.
- Suspension and Rigging.
- Dual Angle Pole Socket - JBL's dual angle pole sockets allow great flexibility in aiming the enclosure (not on - WH version)
- Differential Drive® Woofer
Series: VRX SERIES
INV#42458
- Proprietary Conical RBI® Technology Provides Wide, Consistent Coverage
- Flat Frequency Response and Superior Performance
- Large Backcan for Bass Response to 55 Hz
- Elegant design fits any décor
Series: Ceiling Spkr
INV#60365
- 120° x 60° Coverage
- 262H-1 Differential Drive® Low-Frequency Driver
- 2408H-1 High-Frequency Compression Driver
- Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
- Rotatable waveguide for vertical or horizontal orientation
- Bi-Amp/Passive Switchable
Series: AE SERIES
INV#58802
CBT 70JE-1-WH
Extension for CBT 70J Line Array Column Speaker (White)- Four 125 mm (5 in) high-power LF drivers
- 500 Watt power handling
- Built-in purpose-designed crossover network, for combining with CBT 70J-1
- Coupler plate included
- Extended pattern control (to 400 Hz for ± 20° control, to 200 Hz for substantial off-axis cancellation)
- Extended bass response to 45 Hz
Series: Column Spkr
INV#99780
CONTROL 47HC
Control 40 Series High Ceiling Loudspeaker- Well-Defined Narrow Coverage Pattern, Ideal for High Ceilings
- Provides Improved Sound Quality/Intelligibility in Reverberant Spaces
- Proprietary Conical RBI® Technology for Consistent Pattern Control
- Elegant design fits any décor
Series: Ceiling Spkr
INV#60409
- Highly weather-resistant IP56 rating
- Consistent 90° x 90° broadband pattern control
- Extraordinary clarity for speech, with extended frequency response for music.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
- High-power passive crossover network.
- Overload protection
- 55 Hz – 20 kHz frequency response.
- 200 Watt 70V/100V multi-tap (built-in transformer) direct 8 low-impedance.
Series: Surface-Mt Speakers
INV#114818
- 18 in. compact subwoofer.
- 350 W (continuous), 1400 W (peak) power capacity.
- The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance. The enclosure is covered in black carpet.
- A top mounted, cast aluminum 35 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX218S as a base for a midhigh speaker cabinet.
- Non-resonant, all steel handles are used.
- Attractive 18-gauge perforated steel grille protects components from damage.
Series: JRX SERIES
INV#153757
CONTROL 128WT
Control Contractor 8" In-Wall Speaker (70V)- 200 mm (8 in) polymer-coated aluminum-cone woofer with pure butyl rubber surround
- 25 mm (1 in) pure-titanium dome low-diffraction swivel aimable titanium tweeter
- High-slope crossover for natural midrange sound
- Extended bandwidth performance of 30 Hz – 20 kHz
- 60 W continuous (120 W program, 240 W peak) Power handling (128 W)
Series: In-Wall Sprk
INV#40361