Category:
Series:
QH 160
NADY QH 160- Lightweight personal stereo headphone
Series: QHM/QH Series and DJH Series
INV#120059
LIGHTNING WIRELESS K
NADY Lightning Wireless Kit- Wireless guitar with WGA-15 wireless guitar amp,
- Strap, and gig-bag
Series: Lightning Wireless Kit
INV#119993
MSI-10
NADY MSI-10- Microphone isolator, tailor-made for instrument
- Recording (10" width)
Series: Mic Accessories
INV#161204
- Specially designed dual ferro-fluid 5” drivers offer 200W peak power handling capacity (100W RMS), superior gain before feedback, and up to 125 dB maximum SPL
- Uniquely tuned response projects audio at the desired frequencies to cut through stage noise while ensuring high feedback immunity
- Volume/Impedance selector and two ¼” In/Out jacks for performer adjustability and easy daisy-chaining with up to 15 other PM-100 monitors
Series: PM Series
INV#40485
- 6-channel mic/line mixer in a single rack space (1U)
- Balanced XLR mic and ¼” TRS line inputs each channel
- Master volume, bass, and treble controls
- Phantom power (15V) on channels 4-6 mic inputs
- Dual (low and high level) outputs
- Internal shielded power supply, ~115V/60Hz AC powered
Series: Rack Gear
INV#28690
MICROWHM-16X
NADY micro/WHM-16X- Headset transmitter w/MRX-16 receiver
Series: Nady Wireless
INV#106786
PPAS110+
NADY PPAS110- 10" LF, 3"x10" horn, 50W active full-range, 2-way
- Powered speakers
Series: ProPower Plus Active Series
INV#161199
401X QUAD LT/U CH E4
NADY 401X QUAD LT/U chE4/F/H/E- Uni-directional condenser
Series: 401X QUAD
INV#106040
DMK-7
NADY DMK-7- (4x) DM 70s (1x) DM 80 and (2x) CM 88s in a carry
- Case
Series: Drum Mic Kits
INV#28612
- Powerful internal 150W RMS amp can power internal speakers plus up to four PM-100 Personal Stage Monitors using the two External Speaker outputs
- Specially designed dual ferro-fluid 5” drivers offer superior gain and optimum intelligibility at key vocal/instrument frequencies with ultimate feedback rejection
- Maximum 125dB SPL cuts through even the loudest ambient noise clutter
- Balanced ¼” TRS and XLR input jacks (can be used simultaneously if desired)
- Volume control; 3-band EQ controls (High, Mid, Bass); front baffle Power On and Clipping LED indicators
- High-powered Headphone Output and convenient ¼” balanced Line Output for daisy-chaining with other PM-200As, or connecting to mixers and PAs
- Amplifier’s integrated low-noise/distortion Mosfet outputs offer thermal, short circuit, and anti-thump on/off protection
- Externally selectable 115VAC or 230VAC operation
Series: PM Series
INV#54489
- Wide bandwidth omni-directional electret condenser mic ensures clean transparent audio and enhanced vocal pickup with improved gain before feedback
- Durable thin-metal frame can be easily molded to any user
- Ergonomic design and comfortable fit with or without glasses, hats, or headphones and no hairstyle hindrance
- Available with Mini-XLR or 3.5mm phone plug for wired and wireless applications (fits most standard wireless bodypack transmitters). Available in black or beige color
- Require low voltage phantom power as supplied by most wireless bodypack transmitters
- 9~52V adapter supplied for wired applications
INV#52436
- Durable black carpet cover
- Heavy duty plastic protective corners
- Integrated recessed carrying handles for easy handling
- Binding post (banana jack) and two ¼" (6.3 mm) jack inputs
- Base mount inserts for mounting on speaker stands
Series: ProPower Series
INV#29198
PRA- 8
8-Channel Microphone Preamp- Eight totally independent world-class preamps in one single rack (1RU) through package with servo-balanced XLR inputs and ¼” TS outputs for each preamp
- Highest quality components and advanced design with ultra-linear, high bandwidth operational amps for no-compromise crystal clear audio; exceptionally low noise and negligible distortion
- Individual gain control and Peak LED indicator on each channel with up to 75dB of gain
- +48V Phantom Power with individual Phantom On/Off switches and Phantom Power On LED indicators for each channel
- Rugged construction for maximum long-term reliability
- Shielded internal dual regulated power supply with ~115V(60Hz)/~230V(50Hz) select switch and fused IEC power cord connector
Series: Microphone Pre-amps
INV#7431
PPAS215+
NADY PPAS215- (2x) 15" LF, 5"x15" horn, 200W active full-range,
- 2-way powered speakers
Series: ProPower Plus Active Series
INV#161196
PPAS115+
NADY PPAS115- 15" LF, 5"x15" horn, 100W active full-range,
- 2-way powered speakers
Series: ProPower Plus Active Series
INV#161197
PPAS112+
NADY PPAS112- 12" LF, 5"x10" horn, 100W active full-range,
- 2-way powered speakers
Series: ProPower Plus Active Series
INV#161198
- Durable, roadworthy cabinet construction with Tolex covering, reinforced corners, and large built-in recessed carrying handles
- Wide-angle, short-throw, high-frequency dispersion horns provide clean,accurate treble for optimum clarity
- Convenient Speakon™ and ¼” (6.3mm) connectors for professional hook-ups
Series: THS Series / J Series
INV#28487
THS-1512
NADY THS-1512- 12 LF, 15 horn, 320W 2-way full range loudspeake
Series: THS Series / J Series
INV#120022
TCM 1150
NADY TCM 1150- Studio vacuum tube microphone in padded case,
- With TMPS-2 power supply/ pattern selector unit,
- 30 ft./7-pin XLR cable, elastic spider
Series: TCM Series
INV#120023
TCM 1100
NADY TCM 1100- Studio vacuum tube condenser microphone in
- Plastic carrying case,with 16 ft./7-pin XLR cable
- And TMPS-1 power supply
Series: TCM Series
INV#51746
TCM 1050/AC
NADY TCM 1050/AC- Studio vacuum tube microphone in aluminum flight
- Case, with TMPS-2 power supply/ pattern selector
- Unit, 30 ft./7-pin XLR cable, elastic spider
Series: TCM Series
INV#161181
TCM 1050
NADY TCM 1050- Studio vacuum tube microphone in aluminium flight
- Case, with TMPS-2 power supply/ pattern selector
- Unit, 30 ft./7-pin XLR cable, elastic spider
Series: TCM Series
INV#7540
RMT-1KUD
NADY RMT-1KUD- Dual (side-by-side) rackmount kit for two W-1KU
- Receivers, or one or two UWS-100 receivers
Series: Options and Accessories
INV#106766
RMK-1KX2
NADY RMK-1KX2- Dual (side-by-side) rackmount kit for two UWS-1K
- Receivers
Series: Options and Accessories
INV#106767
RMK-1KWS
NADY RMK-1KWS- Single rackmount kit for one W-1KU receiver
Series: Options and Accessories
INV#161272
RMK-1KUS
NADY RMK-1KUS- Single rackmount kit for one W-1KU receiver
Series: Options and Accessories
INV#106769