Category:
Series:
- - 1200 watt peak power, bi-amp - 133 dB max SPL -
- 100 x 15 degree line array - 2 x 10" LF - 2"
- Compression Driver - mic/line XLR input, XLR
INV#131711
- Two-way speaker: LF 8" - HF 1" full range Power
- RMS: 300 W - Impedance:8 ohms Sensitivity (1W/1m)
- 95dB Maximum SPL: 120 dB Frequency response: 70Hz
INV#152441
- 800 Watts
- 125 dB max SPL
- 45 Hz 20 kHz frequency response
- 10" Woofer, 2.0" v.c.
- 5 x 2" Ultra compact fullrange, 1.0 v.c.
- 120° x 30° slightly tilted pattern control
- Innovative DSP processing
- Pole mountable, easy set-up and transportation
INV#177005
- - 2000 watt peak power, bi-amp - 135 dB max SPL -
- 30 - 140 HZ - 18" Woofer w/ 4" voice coil - soft
- Limiter, volume, EQ shape, x-over - mic/line XLR
INV#131710
- - 700 W digital bi- amplification - 130 dB max
- SPL - Wide dispersion 60 x 60 constant
- Directivity horn - 15" high-output woofer w/ 2.5"
INV#131658
- Flybar holds up to 16 HDL20 (1100 lbs) stack bar
- Included heavy duty steel
INV#160031
- (Flyable Subwoofer) Compatible with HDL10-A 2000
- Watts - 133 dB max SPL 40 - 140 HZ 15" Woofer w/
- 3.5" voice coil soft limiter, volume, EQ shape,
INV#177007
- Pair of brackets for mounting C3108 speakers on
- The wall with adjustable horizontal inclination.
INV#152455
- (Subwoofer) 2500 watts peak power 136 dB max SPL
- 30 - 120 HZ 18" Woofer w/ 4" voice coil soft
- Limiter, volume, EQ shape, x-over mic/line XLR
INV#160016
- 700 watts RMS, bi-amp 131 dB max SPL 100 x 30
- Slightly tilted pattern control 4 x 6" woofers
- 2.5" voice coil CD on waveguide 65 Hz - 20 KHz
INV#160020
- Linkbar for suspending HDL10 below HDL15 - heavy
- Duty steel
INV#177009
- Two-way speaker: LF 10" - HF 1" full range Power
- RMS: 300 W - Impedance:8 ohms Sensitivity (1W/1m)
- 97 dB Maximum SPL: 128 dB Frequency response: 67
INV#152440
- Pair of brackets with adjustable inclination for
- Vertical mounting C3110 speakers on the wall.
INV#152452
- 1600 watts, bi-amp 136 dB max SPL 90 x 50 horn
- 15" Neo Woofer, 4" voice coil 2" Titanium dome
- Neo Compression Driver, 4" v.c. RDNet on board
INV#156067
- - 6800W digital amplification - 145dB max SPL - 2
- X 21" Neodymium woofer, 4.5" voice coil - Peak &
- RMS Limiter, RDNet, cardioid, x-over 60/90Hz,
INV#131485
- Linkbar for suspending HDL20 below HDL18 heavy
- Duty steel
INV#160029
- For remote control of 2 channels of 32 boxes each
- USB in, ethercon (3 wire) or XLR out dimensions:
- Small
INV#160008
- - 8" coax speaker w/ line transformer (8 ohm) -
- Easy mounting with 3 "dogears" - 40 watts max,
- 109 dB max SPL - 60 - 20kHz, 80 degree pattern -
INV#131722
- - 6" dual cone speaker w/ line transformer (8
- Ohm) - "FIREPROOF" Metal backbox with 3 "dogears"
- - 10 watts max, 105 dB max SPL - 150 - 15kHz, 150
INV#131719
- - 3.5" speaker w/ line transformer (8 ohm) - Easy
- Mounting with 3 "dogears" - 16 watts max, 100 dB
- Max SPL - 90 - 20kHz, 120 degree pattern -
INV#131725
- - 800 W RMS - 8 Ohm - 2 pole Amphenol IP67 input
- Connector - 15" high-output woofer w/ 4" voice
- Coil - IP55 rotomoulded polyethylene cabinet -
INV#131640
- - 600 W RMS - 8 Ohm - 4 pole Amphenol IP67 input
- Connector - 15" high-output woofer w/ 2.5" voice
- Coil - 1" Neodymium Compression Driver w/ 1.5" vc
INV#131645
- 500 watts 8 Ohm 4 pole Amphenol IP67 input
- Connector 2 x 8" high-output woofer w/ 2.5" voice
- Coil 2 x 1" Neo Compression Driver w/ 1.75" vc 90
INV#160017
- - 400 W RMS - 8 Ohm - 4 pole Amphenol IP67 input
- Connector - 2 x 8" high-output woofer w/ 2.5"
- Voice coil - 1.4" Neodymium Compression Driver w/
INV#131642
- - 300 W RMS - 8 Ohm - 4 pole Amphenol IP67 input
- Connector - 8" high-output woofer w/ 2.5" voice
- Coil - 1" Neodymium Compression Driver w/ 1.5" vc
INV#131643
- - 100 W RMS - 16 Ohm/ 70v (30W, 15W)/ 100v (60w,
- 30w) - 4 x 1.5mm square 2 m Neoprene cable - 8"
- High-output woofer w/ 1.5" voice coil - 1"
INV#131644