Category:

- Self-contained unit converts input from consumer grade equipment to a mic level balanced output
- Operator volume control of outgoing stereo signal
- 3.5mm male input and XLR male output
- Ground lift switch
- Perfect size for your toolbox or even a shirt pocket
- Black powdercoated aluminum chassis
- Hand soldered connectors
INV#81636

- Features: RHC s AES-1-PR 110 ohm, 24 ga.,
- CL-Rated DMX cable with XLRF - XLRM connectors
INV#83107

- Self-contained unit converts input from consumer grade equipment to a mic level balanced output
- Operator volume control of outgoing stereo signal
- 3.5mm male input and XLR male output
- Perfect size for your toolbox or even a shirt pocket
- Black powdercoated aluminum chassis
- Hand soldered connectors
INV#51268

- HOGM series Mic cables feature a 24 ga. dual
- Conductor, 95% serve shield cable, with durable
- Outer jacket and using Neutrik brand
INV#85453

- Self-contained unit converts input from consumer grade equipment to a mic level balanced output
- Operator volume control of outgoing stereo signal
- RCA male inputs and XLR male output
- Perfect size for your toolbox or even a shirt pocket
- Black powdercoated aluminum chassis
- Hand soldered connectors
INV#51267

- HOGM series Mic cables feature a 24 ga. dual
- Conductor, 95% serve shield cable, with durable
- Outer jacket and using Neutrik brand
INV#85455

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#85781

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#85769

- 5 inch deep box with 3/8" gap/slot lid
- Heavy duty 3/16 inch mounting flange and lid
- Standard size electrical conduit knockouts on left and right sides
- The 5" box allows approximately 8 connectors
- Black powdercoated finish
- Custom engraving for insert plates available
INV#86306

- Features: RapcoHorizon cable, 1/8 mini mono
- Connectors on each end or 1/8 mini to 1/4 ,
- Lifetime warranty. Stereo available (MINI3).
INV#87172

- Stereo mode functions as two separate direct boxes
- Mono mode can combine two high impedance, unbalanced input signals into one low impedance balanced signal
- Heavy duty steel box
- Superior quality connectors and transformer
- Recessed connectors and switches to prevent damage
- Ground lift switch to eliminate hum
- Paralleled 1/4 inch output for on-stage monitoring
- Individually tested for performance and quality
INV#80611

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#81422

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#85782

- Features: Standard MIC1 best-selling cable,
- Nickel plated Neutrik Hard boot -1 series XLR s.
- Flexible outer jacket. Available with black matte
INV#85471

- HOGM series Mic cables feature a 24 ga. dual
- Conductor, 95% serve shield cable, with durable
- Outer jacket and using Neutrik brand
INV#85458

- Features: Standard MIC1 best-selling cable,
- Nickel plated Neutrik Hard boot -1 series XLR s.
- Flexible outer jacket. Available with black matte
INV#85469

- HOGM series Mic cables feature a 24 ga. dual
- Conductor, 95% serve shield cable, with durable
- Outer jacket and using Neutrik brand
INV#85459

- Features: RapcoHorizon s MIC1 cable, 1/4 stereo
- Connector on one end. Male or female XLR on other
- End.
INV#86781

- Features: RHC s AES-1-PR 110 ohm, 24 ga.,
- CL-Rated DMX cable with XLRF - XLRM connectors
INV#83096

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#81427

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#85777

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#81430

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#81426

- Transforms Hi-Z 1/4 inch input to balanced Lo-Z XLR output
- Heavy duty steel box
- Superior quality connectors and transformer
- Recessed connectors and switches to prevent damage
- Ground lift switch to eliminate hum
- Paralleled 1/4 inch output for on-stage monitoring
- Individually tested for performance and quality
INV#80608

- Features: RapcoHorizon MIC3 miniature balanced
- Cable, 1/8 stereo mini connectors to XLR style
- Connectors. Female or male available.
INV#87138

- Features: RapcoHorizon MIC3 miniature balanced
- Cable, 1/8 stereo mini connectors to XLR style
- Connectors. Female or male available.
INV#87119

- Features: RapcoHorizon MIC3 miniature balanced
- Cable, 1/8 stereo mini connectors to XLR style
- Connectors. Female or male available.
INV#87121

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#85773

- Features: Standard MIC1 best-selling cable,
- Nickel plated XLR s. Flexible outer jacket.
- Available with black matte fnish connectors
INV#85750

- Features: RapcoHorizon MIC3 miniature balanced
- Cable, 1/8 stereo mini to 1/4 TRS male.
INV#87144

- Features: RapcoHorizon MIC3 miniature balanced
- Cable, 1/8 stereo mini connectors to XLR style
- Connectors. Female or male available.
INV#87110

- Features: RapcoHorizon MIC3 miniature balanced
- Cable, 1/8 stereo mini connectors to XLR style
- Connectors. Female or male available.
INV#87127

- Features: RapcoHorizon cable, 1/8 mini mono
- Connectors on each end or 1/8 mini to 1/4 ,
- Lifetime warranty. Stereo available (MINI3).
INV#87161

- HOGM series Mic cables feature a 24 ga. dual
- Conductor, 95% serve shield cable, with durable
- Outer jacket and using Neutrik brand
INV#85452

- Features: HADAT is wired to the Alesis ADAT
- Specs. HDA8 meets Tascams D-88 specs or Fostex
- RD8.
INV#84626

- Features: HADAT is wired to the Alesis ADAT
- Specs. HDA8 meets Tascams D-88 specs or Fostex
- RD8.
INV#84631

- Features: HADAT is wired to the Alesis ADAT
- Specs. HDA8 meets Tascams D-88 specs or Fostex
- RD8.
INV#84622

- Features: HADAT is wired to the Alesis ADAT
- Specs. HDA8 meets Tascams D-88 specs or Fostex
- RD8.
INV#84627