Category:
Series:
- 8" Coax with a 1" aluminum dome tweeter and a
- BroadBeam lens. 5-Position selectable tap switch
- for 25, 70.7, 100 Volt applications with 4 Ohm
INV#126871
- 8" Coax with 1" exit compression tweeter. Hanging
- hardware included. 5-Position selectable tap
- switch for 25, 70.7 or 100 Volt application with
INV#54389
- 5.25" Coax with a 1" aluminum dome tweeter and a
- BroadBeam lens. 5-Position selectable tap switch
- for 25, 70.7, 100 Volt applications with 4 Ohm
INV#126873
- 5.25" Coax with BroadBeam tweeter system. Tile
- bridge & paint mask included. 6-Position
- selectable tap switch for 25, 70.7, 100 Volt
INV#127186
- 5.25" Coax with convex titanium dome tweeter.
- Hanging hardware included. 6-Position selectable
- tap switch for 25, 70.7, 100 Volt applications
INV#39795
- 8" Coax with BroadBeam tweeter system. Hanging
- hardware included. 6-Position selectable tap
- switch for 25, 70.7, 100 Volt applications with 8
INV#37122
- Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker
- One 5.25 inch polypropylene woofer and one 1.0 inch convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink
- Weatherized components for indoor and outdoor applications
- Includes UL listed hanging hardware with cables and integrated SpeedClamp™ self-locking wire grip for fast, easy and secure installation. Also includes Euro-block connector and terminal weather boot.
- Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity
- Easy-access, six-position selectable tap switch for 25-, 70.7- and 100-volt applications with a transformer bypass position simplifies ordering and inventory tracking
- Plated steel grille with protective powder-coated finish for lasting durability
- Average senitivity 86.5 dB offers high-output capabilities and reduced amplification costs
- UL 1480 (UEAY), CE and Milspec 810 approved
INV#38719
- 3" full range pendant mount speaker. Includes 10
- ft. of speaker hanging cable and 20 watt 70/100 v
- transformer kit that mounts above hanging point.
INV#126999
- 6.5" Coax with BroadBeam tweeter system. Hanging
- hardware included. 6-Position selectable tap
- switch for 25, 70.7, 100 Volt applications with 8
INV#126976
- 4" Full-range single-cone speaker. Hanging
- hardware included. 5- position tap switch for 25,
- 70.7, 100 Volt applications with 8 ohm
INV#39796
- Twin high-excursion full-range drivers (stereo)
- with 20" (514 mm) Dual-Parabolic dome, 8 ohm
- stereo/4 or 16 ohm mono. Selectable highpass
INV#89483
- 8" Coax with BroadBeam tweeter system. Hanging
- hardware included. 6-Position selectable tap
- switch for 25, 70.7, 100 Volt applications with 8
INV#50138
- 8" Coax with 1" exit compression tweeter. Hanging
- hardware included. 5-Position selectable tap
- switch for 25, 70.7 or 100 Volt application with
INV#52754
- 6.5" Coax with BroadBeam tweeter system. Tile
- bridge & paint mask included. 6-Position
- selectable tap switch for 25, 70.7, 100 Volt
INV#127182
- 12" Coax high-SPL driver & compression horn
- tweeter for open-ceiling applications. Hanging
- hardware is included. 150 Watt transformer with
INV#115827
- 6.5" treated fiber cone with coaxial 1" silk dome
- tweeter, SpeedWing rapid install. Shallow
- backcan 3.5" deep. 6-Position selectable tap
INV#127214
- 6.5" treated fiber cone with coaxial 1" silk dome
- tweeter, SpeedWing rapid install. 6-Position
- selectable tap switch for 25, 70.7, 100 Volt
INV#127216
- 6.5" Coax with BroadBeam tweeter system. Hanging
- hardware included. 6-Position selectable tap
- switch for 25, 70.7, 100 Volt applications with 8
INV#60064
- 2 x 50 watt class D amplifier. Three operating
- modes: stereo, dual mono, or bridged mono. Three
- user selectable inputs: balanced stereo
INV#126974
- 6" open-ceiling coaxial pendant speaker with
- BroadBeam Ring for high-frequency dispersion.
- Hanging hardware included. 6-Position tap switch
INV#126994
- 3" Full-range in-wall speaker. SpeedWing fast
- mounting system, paint mask included. 6-Position
- selectable tap switch for 25, 70.7, 100 Volt
INV#81643
- Pre-construction bracket for the IW31-EZ.
INV#127082
- 4" open-ceiling coaxial pendant speaker with
- BroadBeam Ring for high-frequency dispersion.
- Hanging hardware included. 6-Position tap switch
INV#126996
- 3" Full-range surface-mount speaker. Ships 1 per
- box. Specify black or white. UL 1480 (UEAY)
- approved.
INV#100700
- 4" treated fiber cone with coaxial 0.75" silk
- dome tweeter. SpeedWing fast mounting system.
- Shallow backcan 3.5" deep. 6-Position selectable
INV#127218
- 3-inch full-range high-excursion speake.
- Integrated 10w transformer. Designed to install
- in standard dualgang junction box (not included).
INV#127047
- 8-inch woofer with offset BroadBeamHP horn,
- ported, high power. Stealth surfacemount
- U-bracket and paint mask included. 6-Position
INV#81676
- Pre-construction bracket for CM31-EZ. Brackets
- are pink.
INV#127200
- 3" Full-range in-ceiling speaker. SpeedWing fast
- mounting system, paint mask and tile bridge
- included. 6-Position selectable tap switch for
INV#81657
- 5.25" Coax with BroadBeam tweeter system.
- Surface-mount bracket included. 6-Position
- selectable tap switch for 25, 70.7, 100 Volt
INV#126951
- Twin 1" high-excursion drivers (stereo) with 30"
- (781 mm) Dual-Parabolic dome, 8 Ohm stereo/4 or
- 16 Ohm mono. Selectable highpass filter, 15'
INV#94025
- 5.25" Coax with BroadBeam tweeter system. Tile
- bridge & paint mask included. 6-Position
- selectable tap switch for 25, 70.7, 100 Volt
INV#127187
- Junction Box (for all CM products but CM-EZ
- series) with hardwire lead, flex conduit and
- EuroBlock connector. Affixes to pre-construction
INV#189691
- CM-EZ-II pre-construction bracket. Brackets are
- lime green.
INV#127194
- All CM-EZ models: junction box with hardwire
- lead, flex conduit and EuroBlock connector.
- Affixes to preconstruction bracket for division
INV#127195
- For HP129i & HP1290i only - Extra HPi series
- hanging kit 50' hanging & safety cable, 2
- SpeedClamps & fasteners. (Speaker ships with 10'
INV#126987
- For HP129i & HP1290i only - Extra HPi series
- hanging kit 20' hanging & safety cable, 2
- SpeedClamps & fasteners. (Speaker ships with 10'
INV#126988
- For HP129i & HP1290i only - Extra HPi series
- hanging kit 10' hanging & safety cable, 2
- SpeedClamps & fasteners. (Speaker ships with 10'
INV#53087
- Rigid mount adaptor for FP series speakers
INV#127114
- Tile bridge for IP-CM62-BGM and IP-CM82-BGM.
- Brackets are green
INV#189683
- Pre-Construction Bracket for IP-CM62-BGM and
- IP-CM82-BGM. Brackets are green
INV#189684
- Pre-construction bracket for CM400i & CM42-Ezs.
- Brackets are orange
INV#189693
- Extra tile bridge for the CM600i, CM690i, CM800i,
- CM801i, CM890i, CM800d, CM801d, and CM1001d (-T).
- (Speaker ships with tile bridge included).
INV#114894
- CM600i, CM690i, CM800i, CM801i, CM890i, CM800d,
- CM801d, CM890d, and CM1001d (-T) pre-construction
- bracket. Brackets are purple.
INV#81545
- Extra tile bridge for the CM500i & CM590i.
- (Speaker ships with tile bridge included.)
INV#127172
- CM500 & CM590i Pre-construction bracket. Brackets
- are blue.
INV#127173
