Brand:
- 1 5/8" (4.1275 cm)
- 1 15/16" (4.92252 cm)
- 3/4" (1.905 cm)
INV#69857
- 3 1/2" (8.89 cm)
- 1 1/4" (3.175 cm)
- 1.00 lb (0.45 kgs)
INV#53558
- Input Transformer 1:1 for AA Series Amplifiers
INV#70332
- Summing 2 RCA to 3-Pole Phoenix Connector, 1M
INV#70333
- 1 1/2" (3.81 cm)
- 4" (10.16 cm)
- 4 1/2" (11.43 cm)
- Frequency Response
- 20Hz - 20kHz Flat
- Four Position Detachable Phoenix Connector
- 8 , 25V, 70.7V, 100V Systems
INV#56406
- Extension for iCNS-Basic for executing votes,
- Includes the modules Vote, Agenda and Report.
- Several voting modes are selectable, votes can be
INV#119270
- Extension module for iCNS-Basic integrates
- External devices, interfaces for camera, media
- Control device (enhanced media control protocol),
INV#119272
- 300W transformer for 25/70/100V systems (MCA8150
- - bridged)
INV#152329
- 150W transformer for 25/70/100V systems (MCA 8150
- - per channel)
INV#152330
- 100W transformer for 25/70/100V systems (MCA 8050
- - bridged)
INV#152331
- 50W transformer for 25/70/100V systems (MCA 8050
- - per channel)
INV#152332
- 1 potentiometer wired directly to VCA connectors
INV#51074
- Preconfigured System rack including three TGX20 DSP amplifiers, power distribution, input and output interfaces and network redundancy
- Power distribution mountable either on front or rear*
- Integrated rack sliding doors
- Stackable on a single dolly
INV#230766
- Set of 2 Aluminum Security Locking Knobs for KLR
- Front Panel Volume Controls
INV#192380
- Dante Enabled Accessory Card for Use with HPA
- Amplifiers
INV#193568
- Frequency Response
- 1 7/8" (4.7625 cm)
- 1 5/8" (4.1275 cm)
- 1.00 lb (0.45 kgs)
INV#55948
- Dante Enabled Accessory Card for Use with
- DPA2402/DPA1202/DPA602
INV#193604
- Analog Mixer Accessory Card for Use with
- DPA2402/DPA1202/DPA602
INV#193605
- 5 3/16" (13.1064 cm)
- 19" (48.26 cm)
- 5.00 lbs (2.27 kgs)
INV#69895
- 3/8" (0.87376 cm)
- 1 1/16" (2.61874 cm)
- 0.50 lbs (0.23 kgs)
INV#59961
- 4 3/4" (12.065 cm)
- 2 15/16" (7.46252 cm)
- 0.50 lbs (0.23 kgs)
INV#61959
- 3 1/2" (8.89 cm)
- 1 1/4" (3.175 cm)
- 1.00 lb (0.45 kgs)
INV#42852
- Rack-mount adaptor for SA202.
INV#100346
