Current Category: Ceiling
Brand Filter:
D6-NCB
D6 NEW CONSTRUCTION BRACKET- DIST DESIGN D6 NEW CONSTRUCTION BRACKET
Series: ACCESSORY
INV#101516
$19.00
CONTROL 26CT
6.5" Ceiling Loudspeaker Assembley with Transformer
- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking.
- Coaxially mounted 165 mm (6.5 in) woofer with butyl rubber surround and 19 mm (.75 in) titanium coated
- High power, wide frequency response and low distortion for high sound level capability
- Screw locking barrier strip termination
Series: Ceiling Spkr
INV#28210
$157.00
CM42-EZS-II-WH
4in Coax- 4" treated fiber cone with coaxial 0.75" silk
- dome tweeter. SpeedWing fast mounting system.
- Shallow backcan 3.5" deep. 6-Position selectable
Series: CM-EZ Series
INV#127218
$120.00
RS600I-BK
6.5in Coax- 6.5" Coax with BroadBeam tweeter system. Hanging
- hardware included. 6-Position selectable tap
- switch for 25, 70.7, 100 Volt applications with 8
Series: RSi Series
INV#60064
$319.00
- Clear, high-fidelity performance
- Dog-ears for easy blind mounting
- 90 degree Coverage
- Bare wire termination
Series: Ceiling Spkr
INV#53687
$47.00
- Packaged with grille, backcan and tile rails
- Wide coverage allows fewer speakers
- Coaxially mounted 100 mm (4 in) woofer with butyl rubber surround and 19 mm (.75 in) titanium coated diffraction-loaded tweeter
Series: Ceiling Spkr
INV#9438
$117.00
- 8” O.D. full range speaker
- Pig-tail
- Perforated steel baffle
- Integral molded fiber enclosure
Series: 2x2 TILE REPLACEMENT SPEAKERS
INV#38344
$95.00
- Two-way, full-range coaxial ceiling loudspeaker
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 6.5 , HF 1 x 1" compression driver
80 Hz - 20 kHz- 125° conical coverage
- 94 dB SPL 1W/1m
- 100W RMS, 8 ohm or 70V/100V operation
- Power taps (70V) 60W, 30W, 15W, 7.5W, bypass (8 ohm)
Series: D SERIES
INV#99334
$207.00
- 6" Ceiling Mounted Loudspeaker, 70/100V
- Transformer with 8ohm bypass, includes Mounting
- Hardware. Sold individually, ships in pairs.
Series: AcousticCoverage Ceiling Series
INV#178537
$115.00
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- High fidelity, all horn loaded
- High efficiency
- Integral mounting points
- High power passive crossover
- Five-year product warranty / Fifteen-year enclosure warranty
Series: R SERIES
INV#50293
$525.00
- 8" Two-way ceiling speaker, 70/100V transformer
- With 8ohm bypass, 100degree conical coverage,
- Includes C-ring and rails for blind mount
Series: AcousticCoverage Ceiling Series
INV#189923
$170.00
- Two-way, full-range coaxial ceiling loudspeaker
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 8 , HF 1 x 1.25" compression driver
80 Hz - 20 kHz- 115° conical coverage
- 95 dB SPL 1W/1m
- 100W RMS, 8 ohm or 70V/100V operation
- Power taps (70V) 120W, 60W, 30W, 15W, bypass (8 ohm)
Series: D SERIES
INV#94961
$285.00
- 16 watt internal transformer
- 8 ohm transformer bypass setting
- Input via 2 pole terminal strip
- Lightweight construction makes use of additional support in drywall ceilings unnecessary
- Low profile plastic enclosure
- Press-fit grille blends perfectly into contemporary architecture
- Tile bridge include
- Tuned & ported design for extended bass response
Series: All Items
INV#8934
$60.99
- High 96 dB sensitivity
- 6 Watt multi-tap transformer for 100V, 70V and 25V distributed lines
- 120° conical coverage
- Fits CSS-BB8 backcan
Series: Ceiling Spkr
INV#80242
$24.95
- "Press fit" grilles blend better into contemporary architecture
- Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included)
- Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications
- Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation
- Low depth (4") speaker system for limited space applications
- UL 1480
Series: All Items
INV#38692
$94.99
- 6" Surface Mounted Loudspeaker, 70/100V
- Transforme with 8ohm bypass, includes Yoke Mount.
- Sold individually, ships in pairs Available in
Series: AcousticCoverage Surface Series
INV#178534
$130.00
- 4" Ceiling Mounted Loudspeaker, 70/100 with 8ohm
- Bypass, includes Mounting Hardware. Sold
- Individually, ships in pairs.
Series: AcousticCoverage Ceiling Series
INV#165309
$80.00
AC-CMEZ6/8-PCB
Pre-Construction Bracket for IP-CM62-BGM and IP-CM- Pre-Construction Bracket for IP-CM62-BGM and
- IP-CM82-BGM. Brackets are green
Series: CM-EZ & CM-BGM Accessories
INV#189684
$14.00
- Fast, easy, clean installation
- Direct and reflected sound paths create wide dispersion angle
- Lightweight and durable plastic shell with a paintable off-white finish
- Complies with NFPA National Code 160b and UL-2043
- For 25V and 70V systems
Series: All
INV#53364
Call
- 110 W transformer for 70 V or 100 V lines, with 8 Ohm thru
- Extended bandwidth, extremely smooth frequency response
- 110° x 85° HF coverage, rotatable horn
- SonicGuard™ overload protection
- 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver
- Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket
- Sealed input panel cover and screwdown input terminals
Series: Surface-Mt Speakers
INV#9926
$387.00
SOLUTION 1
8" Loudspeaker Assembly, Pair (5W, Pigtail)- (2) complete loudspeaker assemblies
- 5W- 25/70.7V pigtail transformer
- 22 gage steel baffle
- 16 gage steel enclosure and speaker support bridge included
Series: LOUDSPEAKER ASSEMBLIES
INV#54254
$103.90
CONTROL 24CT MICRO
4.5" Micro Ceiling Speaker with Transformer- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking
- Extremely wide 150™ coverage
- Shallow 4 in (100 mm) depth
Series: Ceiling Spkr
INV#34329
$74.00
- Patented BroadBeam® waveguide technology delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker
- One 5.25 inch polypropylene woofer and one 1.0 inch convex titanium tweeter with FerroFluid cooling mounted to a proprietary cast-aluminum baffle and heat sink
- Weatherized components for indoor and outdoor applications
- Includes UL listed hanging hardware with cables and integrated SpeedClamp™ self-locking wire grip for fast, easy and secure installation. Also includes Euro-block connector and terminal weather boot.
- Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity
- Easy-access, six-position selectable tap switch for 25-, 70.7- and 100-volt applications with a transformer bypass position simplifies ordering and inventory tracking
- Plated steel grille with protective powder-coated finish for lasting durability
- Average senitivity 86.5 dB offers high-output capabilities and reduced amplification costs
- UL 1480 (UEAY), CE and Milspec 810 approved
Series: RSi Series
INV#38719
$225.00
CM52-BGM-WH
5.25in Coax- 5.25" coaxial, polypropylene cone with rubber
- butyl surround and 0.75" silk dome tweeter,
- SpeedWing rapid install. 6-Position selectable
Series: CM-BGM Series
INV#127207
$150.00
8C10PAX/TBLUB
QUAM 8C10PAX/TBLUB- 8" O.D. Speaker, 10 Ounce Magnet, 5W-25/70V
- Transformer
Series: Individual Loudspeakers
INV#158944
$25.90
CONTROL 26C
6.5" Ceiling Loudspeaker Assembley- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking
- Screw locking barrier strip termination
- High power, wide frequency response and low distortion for high sound level capability
Series: Ceiling Spkr
INV#28650
$139.00
- 10oz dual cone speaker provides familiar response & performance
- Attractive CRS white powder coat baffle
- Individually packaged for stocking & ordering convenience
- Quality 5 watt-dual voltage transformer
Series: All Items
INV#36652
$26.99
- 4" Surface Mounted Loudspeaker, 70/100V
- Transforme with 8ohm bypass, includes Yoke Mount.
- Sold individually, ships in pairs Available in
Series: AcousticCoverage Surface Series
INV#178536
$100.00
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
Series: R SERIES
INV#42035
$942.00
- 4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy full range speakers or subwoofers
- Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg" mounting system (Included)
- Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg"mounting system (Included)
- Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications
- Extended low frequency response from the 285 cubic inch optimally tuned and ported deep drawn galvanized steel enclosure
- Front mounted tap selector switch for easy system tuning adjustments includes transformer bypass setting for 8 ohm direct coupled operation
- Perfect companion with the FAPSUB subwoofer system when sub bass is required
- Press-fit grille blends perfectly into contemporary architecture
Series: All Items
INV#40390
$94.99
- Two-way, full-range coaxial ceiling loudspeaker
- Includes a pair of loudspeakers secured in their back cans,
tile support bridge rails, loudspeaker grilles, C-ring support
plates, cutout template, paint mask and flat screwdriver. - Priced as single units, sold and shipped in pairs
- LF 1 x 5 , HF 1 x 1" compression driver
80 Hz - 20 kHz- 130° conical coverage
- 93 dB SPL 1W/1m
- 100W RMS, 8 ohm or 70V/100V operation
- Power taps (70V) 60W, 30W, 15W, 7.5W, bypass (8 ohm)
Series: D SERIES
INV#101538
$176.00
- Two-way, full-range coaxial pendant mount loudspeaker
- Two (2) 15-foot pendant hang kits included for main suspension and safety cable
- Power taps (70V) 60W, 30W, 15W, 7.5W, bypass (8 ohm)
- LF 1 x 6.5", HF 1 x 1" compression driver
- 80 Hz - 20 kHz
- 125° conical coverage
- 94 dB SPL 1W/1m
- 100W RMS
- 8 ohm or 70V/100V operation
Series: D SERIES
INV#103232
$335.00
- 1" Ferrofluid Cooled Dome Tweeter & Highly Efficient 4" Polypropylene Woofer
- All 1/4"-20 Hardware Inserts Allow Easy Integration of "Off The Shelf" Security Hardware
- Atlas Sound POLYGUARDT High Frequency Protection Circuit
- Color Matched Heavy-duty Zinc Chromate Plated & Powder Coated "C" Bracket (Included)
- Five-Year Warranty
- OMNIMOUNTT 10 Series Compatible
- Screwdriver Adjustable 16-Watt 70.7V/100V Transformer (may be bypassed for 8-ohm operation)
- TRX WAVEGUIDET- Constant Directivity Style High Frequency Wave Guide System
- Weather-Resistant Construction For Year-round Indoor or Outdoor Use
Series: All Items
INV#105702
$72.99
- Weather-resistant, rotomolded UV enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control down to 630 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- DYNA-TECH protection circuitry
Series: R SERIES
INV#53163
$1,408.00
- 6" Surface Mounted Loudspeaker, 70/100V
- Transforme with 8ohm bypass, includes Yoke Mount.
- Sold individually, ships in pairs Available in
Series: AcousticCoverage Surface Series
INV#178533
$130.00
LT-810-72
LOWELL LT-810-72- Speaker Package-8in Spkr, 1 x 2 Tile System, 15W,
- 70/25V
Series: All Items
INV#105269
$90.42
- 110 W transformer for 70 V or 100 V lines, with 8 Ohm thru
- Extended bandwidth, extremely smooth frequency response
- 110° x 85° HF coverage, rotatable horn
- SonicGuard™ overload protection
- 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver
- Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket
- Sealed input panel cover and screwdown input terminals
Series: Surface-Mt Speakers
INV#29718
$387.00
S86T725PG8UVK
BOGEN S86T725PG8UVK- S86T725PG8u, Bright white, w/ Volume Control Knob
Series: All
INV#93903
Call
S86T725PG8W
8" Ceiling Speaker Assembly (Off-White)- 4W capacity
- 8" cone speaker for excellent audio quality
- 6 power taps (4W, 2W, 1W, 1/2W, 1/4W, 1/8W)
- Pre-assembled for faster installation
- Steel grille
Series: All
INV#36367
Call
