Brand:

- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racks
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor Power, Signal and Clipping
- Subwoofer/Satellite crossover built-in
INV#50658

- Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
- Higher DSP capabilities: More control; has band pass filter per channel
- Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
- Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
INV#182661

- Two-channel, 750W at 4ohm Power Amplifier
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
INV#123791

- Two-channel, 450W at 4ohm Power Amplifier
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
INV#123790

- Two-channel, 1350W at 4ohm Power Amplifier
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
INV#123792

- Two-channel, 650W at 4 ohm Power Amplifier
- Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb
- Higher DSP capabilities: More control; has band pass filter per channel
- Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
INV#182659

- Two-channel, 300W at 4ohm Power Amplifier
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
INV#123789

- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racks
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor Power, Signal and Clipping
- Subwoofer/Satellite crossover built-in
INV#50657

- Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb
- Higher DSP capabilities: More control; has band pass filter per channel
- Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
- Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
INV#182660

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#80314

- High peak output power with up to 4500 Watts
- Power levels matched to the most popular loudspeakers and optimized for maximum real-world headroom into 4 and 8 speaker systems
- Class-D output stage with a universal power supply for high performance and efficiency
- Extensive and powerful loudspeaker processing built in. Includes High & Low-Pass filters, 4-band PEQ, Limiting, and Delay
- Large LCD display simplifies amplifier setup and indicates amp status
- Inputs: Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capability
- Precision rotary encoders for gain and DSP parameter control
- Outputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections
- Digital Limiting automatically protects the amplifier from damage due to temperature rise or overdrive
- Adjustable speaker protection to match your loudspeaker’s power and impedance
- Front panel LEDs indicate signal presence, input overload, and amplifier clipping
INV#176304

- High peak output power with up to 1600 Watts
- Power levels matched to the most popular loudspeakers and optimized for maximum real-world headroom into 4 and 8 speaker systems
- Class-D output stage with a universal power supply for high performance and efficiency
- Extensive and powerful loudspeaker processing built in. Includes High & Low-Pass filters, 4-band PEQ, Limiting, and Delay
- Large LCD display simplifies amplifier setup and indicates amp status
- Inputs: Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capability
- Precision rotary encoders for gain and DSP parameter control
- Outputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections
- Digital Limiting automatically protects the amplifier from damage due to temperature rise or overdrive
- Adjustable speaker protection to match your loudspeaker’s power and impedance
- Front panel LEDs indicate signal presence, input overload, and amplifier clipping
INV#176305

- Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb
- Higher DSP capabilities: More control; has band pass filter per channel
- Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
- Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
INV#182658

- 2 channels, 500 watts/ch at 8ohm, 750 watts/ch at
- 4ohm, 1200 watts/ch at 2ohm
INV#137362

- 2 channels, 200 watts/ch at 8ohm, 300 watts/ch at
- 4ohm, 430 watts/ch at 2ohm
INV#137360

- 2 channels, 280 watts/ch at 8ohm, 450 watts/ch at
- 4ohm, 700 watts/ch at 2ohm
INV#137361

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#80313

- Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- New system monitoring provides software visibility of AC line voltage and power supply temperature
INV#81759

- Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- New system monitoring provides software visibility of AC line voltage and power supply temperature
INV#81760

- 2 channels, 850 watts/ch at 8ohm, 1400 watts/ch
- At 4ohm, 2000 watts/ch at 2ohm, 4000 watts/ch at
- 4ohm (bridged)
INV#137363

- 2 channels, 1100 watts/ch at 8ohm, 1800 watts/ch
- At 4ohm, 2500 watts/ch at 2ohm, 5000 watts/ch at
- 4ohm (bridged)
INV#137364

- PowerLight switchmode power supply for highest efficiency and improved audio performance
- Flow-thru air path and solid aluminum heat sinks for maximum cooling
- DataPort supports remote computer control and/or external DSP-4 modules
- Detented gain controls with 1 dB steps for precise calibration
- Removable knobs with lock-out security plate to prevent unauthorized tampering
- User defeatable clip limiters and selectable low-frequency filter per channel (3 Hz, 30 Hz, or 50 Hz)
- Three selectable input gains (26 dB, 32 dB, or 1.2 V)
- Front and rear panel LEDs indicate status of switch settings at a glance
- Parallel Dataport, XLR/M and XLR/F connectors for simple loop-through connectivity
- Neutrik Speakon® and "Touch Proof" binding post outputs
- Neutrik Powercon® power cable remains secure on the road
- 3 year warranty, plus optional 3 year extended service contract
INV#42504

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#80315

- Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- New system monitoring provides software visibility of AC line voltage and power supply temperature
INV#81757

- Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
- Switch-mode universal power supply
- Intuitive front-panel LCD screen for quick, easy configuration
- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
INV#71564

- Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
- Switch mode power supply provides high efficiency and low weight
- Forced air cooled (front in, rear out)
- Removable dust filters
- Front mounted attenuators
- Front panel indicators for output level, clip/protect, and power on/off
- Gain selectable switch for both channels
- Rack ears for permanent installation in a standard 2RU enclosure
- Neutrik Speakon output connectors
- 3-position gain switch (1V, 32dB or 26dB sensitivity)
- 3-position mode switch (bridged, stereo or parallel mono)
- 3-position HPF switch (30Hz, 50Hz or off)
- On/off limiter switch
- Permanently attached power cord
- Extensive protection circuitry
- Safety/Compliance: cCSAus, FCC, CE, RoHS
INV#100333

- Patented 5th-generation Class-I circuitry provides terrific efficiency for strong performance with a low power draw
- Built-in BSS OmniDrive HD DSP processing and 24-bit/192kHz Cirrus Logic SHARC converters, along with FIR and IIR filters provide ultra-smooth performance
- A front-panel USB connector lets you connect a USB drive to quickly transfer DSP settings that were created in a computer
- Analog XLR inputs and outputs, as well as AES/EBU digital XLR inputs and outputs. Speakon and Binding Post outputs are also provided
INV#58281

- Patented 5th-generation Class-I circuitry provides terrific efficiency for strong performance with a low power draw
- Built-in BSS OmniDrive HD DSP processing and 24-bit/192kHz Cirrus Logic SHARC converters, along with FIR and IIR filters provide ultra-smooth performance
- A front-panel USB connector lets you connect a USB drive to quickly transfer DSP settings that were created in a computer
- Analog XLR inputs and outputs, as well as AES/EBU digital XLR inputs and outputs. Speakon and Binding Post outputs are also provided
INV#58282

- Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- New system monitoring provides software visibility of AC line voltage and power supply temperature
INV#81758

- 4-channel DSP amplifier for liveà applications
- Powerà density of up to 10kW in 2RU
- Fullyà integrated DSP with advanced 96à kHz processing and FIRà Drive technology
- OMNEO integration for seamless compatibility with Dante and OCA
INV#230768