Brand:
- 70V/25V/4 Ohm/8 Ohm, 120 Watts
- Built-in Media Player USB/SD, FM & Bluetooth, with the ability to record to USB or SD
- 3 Mic/Line inputs
- - CH1 - Mic/Line on Phoenix terminal
- - CH2 - Mic on Phoenix terminal - Line on RCA
- - CH3 - Mic on Phoenix terminal - Line on RCA
- - CH3 - 3.5mm Aux on front panel
- Phantom Power support for primary mic
- (1) TELE-PAGING input, and (1) MOH/LINE OUT on 3-prongs Phoenix terminals
- Speaker outputs on 5-prongs Phoenix Terminals
- Power, Signal, -20dB, Clip and Protect Indicators
- Output Current Limiting, Thermal Protection & DC Offset protection
INV#274441
- FLS® Feedback Locating System
- Master Mute for Channels 1-5
- Combination XLR and 1/4" input jack
- Footswitchable effects defeat and Master Mute
- Kosmos® -C
- 9-Band Graphic EQ
- RCA, 1/8" Media input
- Dual power section with independent control
- RCA Record outputs
- On-board 24 bit digital effects
- LED Meter bridge
- Mid-Morph®
- Power amp sub-sonic filtering
- 15 Volt Phantom Power
- Bluetooth® streaming audio
- Weight Unpacked: 20.02 lb(9.08 kg)
- Weight Packed: 22.29 lb(10.11 kg)
- Width Packed: 14"(35.56 cm)
- Height Packed: 19.75"(50.165 cm)
- Depth Packed: 13"(33.02 cm)
INV#151373
- All-in-one for Easy Operation and Fast Setup
- Superior Sound through Painstaking Design and Parts Selection
- Intuitive, Functional Controls and Connectivity
- Built-in SPX Effects
- High-efficiency Power Amplifiers
- Lightweight, Practical Design
- Uncompromising Reliability and Safety Standards
- Forced Air Keeps the System Cool Even in Difficult Conditions
- Six Advanced Analog Compressors Included
- Practical Utility Features
- Yamaha Speaker Processing
- Power Amp Mode Selector
- Optional Rack Mount Hardware
INV#42725
- FLS Feedback Locating System
- Master Mute for channels 1-7
- Footswitchable effects defeat
- Combination XLR and 1/4" input jacks
- RCA, 1/8" Media input
- Selectable 9-Band Graphic EQ with FLS
- Selectable Main or Monitor dual power section
- RCA Record outputs
- LED Meter bridge
- Digital effects parameter control
- Power amp sub-sonic filtering
- On-board 24- bit digital effects with mute button
- Clip light and signal present indicator
- Kosmos-C
- Main line level 1/4" output
- Mid-Morph EQ
- DDT Speaker protection circuit
- 48 Volt Phantom Power
- Bluetooth® streaming audio
- Weight Unpacked: 23.02 lb(10.44 kg)
- Weight Packed: 26.01 lb(11.8 kg)
- Width Packed: 14"(35.56 cm)
- Height Packed: 22"(55.88 cm)
- Depth Packed: 13.75"(34.925 cm)
INV#151372
- 1,000 Watts RMS 1,500 Watts peak; Digital
- Effects; Midmorph EQ; Dual 9-Band Main/Mon
- Graphic EQ; FLS exclusive Feedback detection
INV#178426
- Full-featured 8-channel, 1600W, ultra-light Professional Powered Mixer with onboard 32-bit digital RMFX+™ processor
- 800W + 800W Mackie designed Class-D, Fast Recovery™ power amplifiers
- 32-bit RMFX+™ processor featuring 24 “Gig Ready”, useable reverbs, choruses, and tap delay for live applications
- 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
- New Dedicated In-line Compression provides increased presence and punch for vocals and instruments
- 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
- Mackie's 3-Band Active channel EQ with a Mid sweep (100Hz-8kHz) on mono channels
- 2 built-in DI boxes for direct instrument connections
- Separate Monitor and FX auxiliary sends
- Dual 9-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
- 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
- Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
- Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig
- Built like a tank and armored in poly carbonate ABS, the PPM1008 features classic Mackie rounded front chassis design. So if the PPM rolls on its face during transport the controls are recessed and protected.
- Ultra-Lightweight and portable (25.2 lbs / 11.4 kg)
INV#53847
- Rackmount Bracket Set for 1402VLZ4, VLZ3 & VLZ Pro
INV#161841
- RotoPod Bracket Set for 1604VLZ4, VLZ3 & VLZ Pro
INV#161839
- Rackmount Bracket Set for 1642VLZ4, VLZ3 & VLZ Pro
INV#161840
- Rackmount Bracket Set for 1202VLZ4, VLZ3 & VLZ Pro
INV#161842
- FLS® Feedback Locating System
- Combination XLR and 1/4" input jack
- 5-band graphic EQ with FLS®
- Master mute for channels 1-4
- On-board digital reverb
- RCA, 1/8" media input
- Dual power amp section
- RCA record outputs
- LED meter bridge
- Power amp sub-sonic filtering
- Footswitchable effects defeat
- Weight Unpacked: 14.99 lb(6.8 kg)
- Weight Packed: 17.00 lb(7.71 kg)
- Width Packed: 11.75"(29.845 cm)
- Height Packed: 17.75"(45.085 cm)
- Depth Packed: 11.5"(29.21 cm)
INV#151374
- Versatile 16-Input Configuration Adapts to Varied Source Requirements
- Advanced Channel EQ
- Ample I/O for Expansion and Integration
- One-knob Compression on Mono Channels
- 9-band Digital Graphic EQ with Presets & Memory
- FRC (Frequency Response Correction) System
- Automatic Feedback Suppression
- Multi-band "Maximizer"
- Dual Yamaha SPX Effect Processors
INV#51435
