Brand:

- 12 analog mic/line input, 8 analog output,
- Networked signal processor with fault-tolerant bus
INV#60367

- Networked signal processor and fault-tolerant bus
- Chassis (no CobraNet ) - requires up to four
- Input / output cards
INV#51857

- 12 analog mic/line input, 8 analog output,
- Networked signal processor with 12 independent
- AEC alogrithms and fault-tolerant bus
INV#94371

- Open-architecture, 1RU design built for general-purpose and PA applications
- USB connection facilitates easy integration with PC audio sources
- Dante audio networking supports 64 x 64 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones, amplifiers, mixers, and end points
- Bose AmpLink port provides 8 channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose amplifiers
- Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity
- GPIO (5 in/5 out) and Serial for interfacing with external devices and control systems
- High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 118 dB dynamic range.
- Bose ControlSpace Designer software enables a large set of signal processing modules, such as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors, delays and logic
- A variety of control options - compatible with the programmable Bose CC-64 and CC-16 controllers, ControlCenter digital zone controllers, and ControlSpace Remote clients
- Supports industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports, with available drivers for AMX and Crestron-based systems
- Bose Part # 834317-1110
INV#244709

- 24 x 24 channel matrix mix engine
- 48/96 kHz sampling rate
- Dante & OCA onboard
- 12 analog mic/line inputs, 8 analog ouputs
- >118 dB SNR, <0.002% THD
INV#250959

- Elegant styling with intuitive controls for end user operation
- 122 x 32 pixel backlit blue LCD
- Sealed VOLUME +/- and SELECT +/- pushbuttons
- Simplified drag-and-drop setup using ControlSpace Designer
- DIP switch addressing on back of unit
- Programmable control of system elements (switching of audio sources, system configurations)
- Supports programming of easy-to-select scenes-allowing multiple room usage scenarios to be recalled from the CC-16 by end users
- Customizable on-screen wording provides easier system operation
- Programmable software lock out
- Fits into a standard 2-gang electrical wall box
- Bose Part # 41761
INV#49238

- Networked I/O expander with fault-tolerant bus
- Chassis (no CobraNet ) - requires up to four
- Input / output cards
INV#51858

- Elegant styling with easy-to-read dynamic labeling for simplified end user operation
- 2-line by 40-character backlit LCD screen
- Four gain/selector control knobs (rotary/push) with LED rings
- Four bank switch buttons to change Gain/Selector control knob mapping for 16 unique controls
- One master scene/preset recall knob (rotary scroll/push to select)
- Simplified drag-and-drop setup using ControlSpace Designer software
- Customizable on-screen wording provides easier system operation
- Supports programming of easy-to-select scenes – allowing multiple room usage scenarios to be recalled from the CC-64 by end users
- Programmable software lock-out
- Fits into a standard 5-gang electrical wall box
- Bose Part # 41760
INV#50853

- Mic or Line, GUI Selectable
- Configuration Electronically Balanced Gain
- -40 to 15dB in 0.25dB Steps
- 48V, GUI Enabled
- Frequency Response
- 110dB Type (Unweighted)
- >100dB (50Hz-10khz)
- 0.002% (1kHz @ 4dBu)
- 1.5" (3.9cm)
- 4" (10.1cm)
- 5.2" (13.21cm)
- External Power Supply Safety and Certifications
- cUL, CE, RoHS, TUV
INV#169174

- Line Input Impedance
- 500mV (-6dB) Balanced
- 316mV (-10dB) Unbalanced
- 15kHz 18dB / Octave (Fixed)
- 200Hz, 300Hz, & 400Hz @ 18dB / Octave (Dip Switch Selectable)
- 24VDC Power Requirements
- 1 1/2" (38mm)
- 2 1/2" (63.5mm)
INV#169206

- Microphone or Line, Software Selectable
- 40-Bit Floating Point
- Analog Converters
- 48V, Software Enabled
- 110dB Type (Unweighted)
- >100dB (50Hz-10khz)
- 0.002% (1kHz @ 4dBu)
- Configuration Electronically Balanced Gain
- -100 to 15dB in 0.25dB Steps
- Power Consumption
- /-, GUI Selectable
- Frequency Response
- 1.75" (44mm)
- 7.2 lbs / 3.25 kg
- Listed to UL60005
INV#169181

- Microphone or Line, Software Selectable
- 40-Bit Floating Point
- Analog Converters
- 48V, Software Enabled
- 110dB Type (Unweighted)
- >100dB (50Hz-10khz)
- 0.002% (1kHz @ 4dBu)
- Configuration Electronically Balanced Gain
- -100 to 15dB in 0.25dB Steps
- Power Consumption
- /-, GUI Selectable
- Frequency Response
- 1.75" (44mm)
- 7.2 lbs / 3.25 kg
- Listed to UL60005
INV#169184

- All-in-one design supports simultaneous VoIP, PSTN, and USB soft codecs in a single, 1RU model
- 8-channel advanced AEC with multiple references, routable to both analog and Dante inputs
- Adaptable noise cancellation on each AEC channel; non-linear processing and comfort noise to enhance the clarity and intelligibility of meetings
- Single-line VoIP with an internal web interface, allowing IT personnel to configure VoIP parameters without design file access or integrator involvement
- PSTN connection (RJ-11) for worldwide POTS/analog telephone systems
- USB connection facilitates easy integration with all soft codecs
- Dante audio networking includes 16 x 16 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones and amplifiers
- Bose AmpLink port provides 4 channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose amplifiers
- GPI and Serial for external connections, such as fire alarm triggers and interfacing with control systems
- Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity
- Bose Part # 834315-1110
INV#244708

- Right-sized connectivity for cost-effective commercial installation - 2 x 2 balanced analog I/O, 2 pair mono-summed RCA inputs, 8 control inputs, 1 control output, mute contact, Ethernet port, and Bose AmpLink connectivity
- CSP configuration utility with browser-based UI facilitates real-time display and control of levels, routing, thresholds, priorities, scheduled events, Bose loudspeaker EQs, plus input and area EQs
- Rear-panel Ethernet port for PC/Mac configuration; also allows for connection to networks supporting ControlCenter digital zone controllers and the ControlSpace Remote app
- AutoVolume compensation continuously adapts zone output level based on ambient noise when paired with the Bose AVM-1 sense microphone (sold separately)
- Opti-voice paging provides a smooth transition between music and announcements
- Opti-source level management monitors input level of up to 4 sources, maintaining consistent volume when switching sources
- SmartBass processing expands performance and response at any listening level on supported Bose loudspeakers
- Bose AmpLink output for simplified digital audio connection to compatible power amplifiers, reducing terminations, and related points of failure
- Intuitive end-user operation - optional ControlCenter CC-1D, CC-2D, and CC-3D (sold separately) digital zone controllers and ControlSpace Remote app provide easy volume control and source selection
- Bose Part # 808453-1110
INV#240255

- Right-sized connectivity for cost-effective commercial installation - 8 x 4 balanced analog I/O, 4 pair mono-summed RCA inputs, 8 control inputs, 1 control output, mute contact, Ethernet port, and Bose AmpLink connectivity
- CSP configuration utility with browser-based UI facilitates real-time display and control of levels, routing, thresholds, priorities, scheduled events, Bose loudspeaker EQs, plus input and area EQs
- Rear-panel Ethernet port for PC/Mac configuration; also allows for connection to networks supporting ControlCenter digital zone controllers and the ControlSpace Remote app
- AutoVolume compensation continuously adapts zone output level based on ambient noise when paired with the Bose AVM-1 sense microphone (sold separately)
- Opti-voice paging provides a smooth transition between music and announcements
- Opti-source level management monitors input level of up to 4 sources, maintaining consistent volume when switching sources
- SmartBass processing expands performance and response at any listening level on supported Bose loudspeakers
- Bose AmpLink output for simplified digital audio connection to compatible power amplifiers, reducing terminations, and related points of failure
- Intuitive end-user operation - optional ControlCenter CC-1D, CC-2D, and CC-3D (sold separately) digital zone controllers and ControlSpace Remote app provide easy volume control and source selection
- Bose Part # 808456-1110
INV#240256

- 12-channel AEC expansion with multiple references to complement ControlSpace EX processors in larger systems
- Adaptable noise cancellation on each AEC channel; non-linear processing and comfort noise to enhance the clarity and intelligibility of meetings
- Dante audio networking supports 16 x 16 audio channels for connection to EX processors
- Front-panel interface features large OLED display and rotary encoder for setting network parameters and monitoring channel activity
- Bose Part # 834316-1110
INV#244707

- All-in-one design supports simultaneous VoIP, PSTN and USB soft codecs in a single 1RU model
- 12-channel advanced AEC routes to both analog and Dante inputs. Multiple references allow one EX-1280C processor to support multiple rooms, or AECsharing across multiple processors. Each AEC channel includes adaptable noise cancellation, non-linear processing and comfort noise to enhance the clarity and intelligibility of the meeting
- 2-line VoIP supports all popular codecs. A VoIP web interface allows IT personnel to configure VoIP parameters without audio system design file access or integrator involvement
- PSTN connection (RJ-11) for worldwide POTS/analog telephone systems. It includes compliance certification for most countries.
- USB connection facilitates easy integration with PC soft codecs
- Dante audio networking supports 64 x 64 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones
- Bose AmpLink port provides 8-channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose amplifiers
- Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity
- GPIO (5 in/5 out) for external connections including microphone pushbuttons or driving microphone LEDs
- Bose Part # 772234-1110
INV#227723

- One-cable-from-the table connectivity supports PoE+ and Dante audio networking to maximize ease of integration
- Dante audio networking for connection to other Dante-enabled products over Ethernet-based networks.
- USB 2.0 connector supports PC connections to soft codecs such as Skype for Business
- Headset connectors for direct connection to office and mobile phones through RJ-9 and 3.5 mm TRRS ports
- Dual network and power connectors allow daisy-chaining of multiple EX endpoints
- Rotatable mounting tabs allow for multiple mounting options
- Low-profile aluminum enclosure with integrated LED indicators for unobtrusive under-table mounting
- Simplified software configuration via ControlSpace Designer software. Supports autodiscovery, auto-routing, and logic presets for microphone LEDs and pushbuttons
- Optional magnetic mounting plate for single-handed under-table mounting, and a 60 W power supply
- Power and signal indicators
- Bose Part # 771784-0110
INV#227720

- One-cable-from-the table connectivity supports PoE+ , Dante audio networking, logic I/O and LED power to maximize ease of integration
- Broad conference microphone compatibility with 8 high-quality mic/line input channels, each featuring 48V phantom power, 12V LED power, 1 logic input and 2 logic outputs for interfacing with microphone pushbuttons and indicators
- Dante audio networking for connection to other Dante-enabled products over Ethernet-based networks
- Dual network and power connectors allow daisy-chaining of multiple EX endpoints
- Rotatable mounting tabs allow for multiple mounting options
- Low-profile aluminum enclosure with integrated LED indicators for unobtrusive under-table mounting
- Simplified software configuration via ControlSpace Designer software. Supports autodiscovery, auto-routing, and logic presets for microphone LEDs and pushbuttons
- Optional installation accessories include a magnetic mounting plate for single-handed under-table mounting, and a microphone extension cable, and a 60 W power supply
- Power and signal indicators
- Bose Part # 772045-0110
INV#227721

- One-cable-from-the table connectivity supports PoE+, Dante audio networking, logic I/O and LED power to maximize ease of integration
- Broad conference microphone compatibility with 4 high-quality mic/line input channels, each featuring 48V phantom power, 12V LED power, 1 logic input and 2 logic outputs for interfacing with microphone pushbuttons and indicators
- Dante audio networking for connection to other Dante-enabled products over Ethernet-based networks
- Dual network and power connectors allow daisy-chaining of multiple EX endpoints
- Rotatable mounting tabs allow for multiple mounting options
- Low-profile aluminum enclosure with integrated LED indicators for unobtrusive under-table mounting
- Simplified software configuration via ControlSpace Designer software. Supports autodiscovery, auto-routing, and logic presets for microphone LEDs and pushbuttons
- Optional installation accessories include a magnetic mounting plate for single-handed under-table mounting, a microphone extension cable, and a 60 W power supply
- Power and signal indicators
- Bose Part # 771783-0110
INV#227722

- Microphone or Line, Software Selectable
- 40-Bit Floating Point
- Analog Converters
- 48V, Software Enabled
- 110dB Type (Unweighted)
- >100dB (50Hz-10khz)
- 0.002% (1kHz @ 4dBu)
- Configuration Electronically Balanced Gain
- -100 to 15dB in 0.25dB Steps
- Power Consumption
- /-, GUI Selectable
- Frequency Response
- 1.75" (44mm)
- 7.2 lbs / 3.25 kg
- Listed to UL60005
INV#169185