Brand:
- Dual 31-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12dB
- Front panel bypass switch
- <
>12 dB input gain range - 4-segment LED ladders for monitoring output levels
- XLR and TRS Inpts and Outputs
- Frequency Repsonse of <10Hz to >50kHz
- Dynamic range of greater than 108dB
INV#81855
- Single 31-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12dB
- 12dB per octave, 3dB down @ 50Hz low-cut filter
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inputs and Outputs
- Frequency Repsonse of <10Hz to >50kHz
- Dynamic range of greater than 108dB
INV#81854
- Dual 15-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12dB
- Front panel bypass switch
- <
>12 dB input gain range - 4-segment LED ladders for monitoring output levels
- XLR and TRS Inpts and Outputs
- Frequency Repsonse of <10Hz to >50kHz
- Dynamic range of greater than 108dB
INV#81856
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced outputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
INV#28637
- Frequency Response
- 22dBu Balanced, 18dBu Unbalanced
- 19 1/16" (48.2854 cm)
INV#49331
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
INV#9446
- Balanced XLR and ¼” TRS input/output connectors
- Constant-Q bandwidth from each filter with 3% center frequency accuracy
- Parallel filter design for minimal phase distortion
- Ultra low-noise circuitry
- Low-cut filter at 40Hz, 12dB/octave switchable, with status LED
- Band range: +/- 12dB gain
- Equalizer On/Off bypass switch with status LED
- Center detents on faders and variable input level control (+/- 12dB)
- Gain status LED bar graph with peak LED
- Power switch with integral LED On indicator
- Shielded internal power supply with AC input and selectable line voltage (~115V/60Hz or ~230V/50Hz)
- Compact and durable all-steel chassis design
INV#7506
- 2 CHANNEL 2/3-OCT. microGRAPHIC EQ (1U) 2 x 15
- CONSTANT-Q FILTERS; 20mm SLIDERS 6dB/ 12dB
- SWITCHABLE; " & XLR I/O
INV#40495
