Brand:
- Programmable Volume Control for the DriveRack 260, 220i and the ZonePro 640 and 641
- Up to 1000 ft. on CAT 5 Cable
- Programmable Contact Closure Interface
INV#35101
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#35100
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#36416
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#34616
- 8-character backlit display supports up to thirty-one scrolling characters
- Instant user feedback for control assignments, default settings, and actions
- Three buttons navigate menus, change values, and enable or disable the remote control
- All control assignments, including item labeling, parameter limits and firmware version upgrades are handled by software included with Symetrix DSP hardware
- Standard with a white plastic faceplate, ARC-2e mounts into a single gang electrical box
INV#98718
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#37958
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#35953
- Remote Control for your system
- Visual indication verifies changes
- Preset Recall
- Preset Scroll
- Input Gain Control
- Matrix Mix Gain Control
- Output Gain Control
- Zone Source Select
- Channel Mute
- Logic High/Low
- Lock-Out Feature
INV#88326
- Remote Control for your system
- Visual indication verifies changes
- Preset Recall
- Preset Scroll
- Input Gain Control
- Matrix Mix Gain Control
- Output Gain Control
- Zone Source Select
- Channel Mute
- Logic High/Low
INV#48805
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#99874
- RS485 wall control panel for MTX processors.
- Features rotary encoders and 4 buttons. Simple
- Connection via Cat5. 3 Gang electrical box size.
INV#158297
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#42309
- Remote Level Control for your system
- Eight assigned mixer/gain blocks
- For use with ne24.24M, NE two-channel power amplifiers (pe), NE multi-channel power amplifiers (pe), ne4800 / ne8800 DSP processors, PEMA™ power amplifiers
- Use along with neWR-5 wall remote
- IEEE 802.3af Power over Ethernet (PoE)
- Automatic IP Addressing
- Assignable Fader Scaling
- Signal Level Option on Mute Buttons
- Assignable Signal Level LED Breakpoints
- Communication Failure Indicator
- User Defined Labels per Channel
- Panel Lock-Out Contact Closure
INV#104062
- Remote Level Control for your system
- Sixteen assigned blocks
- For use with ne24.24M, NE two-channel power amplifiers (pe), NE multi-channel power amplifiers (pe), ne4800 / ne8800 DSP processors, PEMA™ power amplifiers
- Use along with neWR-5 wall remote
- IEEE 802.3af Power over Ethernet (PoE)
- Automatic IP Addressing
- Assignable Fader Scaling
- Signal Level Option on Mute Buttons
- Assignable Signal Level LED Breakpoints
- Communication Failure Indicator
- User Defined Labels per Channel
- Panel Lock-Out Contact Closure
INV#104064
- 13/16" (2.07 cm)
- 3" (7.62 cm)
- 1 3/4" (4.45 cm)
INV#49147
- 4 1/2" (11.43 cm)
- 2 3/4" (6.99 cm)
- 2" (5.08 cm)
INV#48462
- 1/2" (1.27 cm)
- 2" (5.08 cm)
- 1.00 lb (0.45 kgs)
INV#37206
- For use with ZonePro digital zone processors
- Up to 1000 ft. on CAT 5 Cable
INV#35102
- RS485 wall control panel for MTX processors.
- Features 4 buttons. Simple connection via Cat5. 1
- Gang electrical box size. White finish
INV#158298
- RS485 wall control panel for MTX processors.
- Features 1 rotary encoder and 4 buttons. Simple
- Connection via Cat5. 1 Gang electrical box size.
INV#158299
- Programmable DSP Engine: Design an audio system
- Using 32-bit DSP components (Matrix Mixers, EQs,
- Routers, Crossovers, Delay, Surround Sound,
INV#75077
- Programmable DSP Engine: Design an audio system
- Using 32-bit DSP components (Matrix Mixers, EQs,
- Routers, Crossovers, Delay, Surround Sound,
INV#59466
- Programmable DSP Engine: Design an audio system
- Using 32-bit DSP components (Matrix Mixers, EQs,
- Routers, Crossovers, Delay, Surround Sound,
INV#49183
- DIGITAL REMOTE FOR CP66, HAL1, EXP1 REQUIRES
- CP66, HAL1, or EXP1; BLACK FINISH; BLACK DECORA
- PLATE INCLUDED; FITS IN 1-GANG U.S. ELECTRICAL
INV#110696
- Power, control, and a single channel of ARC Audio are connected via RJ-45 inputs or screw-type barrier strips
- Passes one (1) channel of audio over CAT5 cable
- Supports "sleep" mode for light-sensitive environments like theaters
- Hardware lockout pins are provided to accommodate an installer-supplied key switch
- Software and hardware lockout functions can be independently programmed
- Push-button encoder with 8-segment LED bar graph with splash resistant faceplate
- The encoder can be assigned to two functions, A and B that are toggled by pressing the encoder button
- Mounts into a single gang electrical box (US), finished with a standard Decora® faceplate (supplied in white)
INV#60969
- Programmable DSP Engine: Design an audio system
- Using 32-bit DSP components (Matrix Mixers, EQs,
- Routers, Crossovers, Delay, Surround Sound,
INV#75078
- 6.6 (2 meter), 9-pin D-sub HA remote control
- Cable for connecting AD8HR to a computer serial
- Port or daisy-chaining AD8HR HA-remote ports
INV#163156