Brand:

- 12" FS Series Arena Horn with 65 x 65 Degree
- Dispersion
INV#193579

- 12" FS Series Arena Coaxial Speaker with 90
- Degree Conical Dispersion
INV#193576

- 1.4'' / 100 W (AES) / 3'' VC / 8 ohms | min.
- Impedance 6.7 ohm @ 3.7 kHz ohms / Neodymium
INV#177205

- 12" FS Series Arena Horn with90 x 90 Degree
- Dispersion
INV#193577

- 2'' / 100 W (AES) / 3'' VC / 8 ohms | min.
- Impedance 6.7 ohm @ 3.6 kHz ohms / Neodymium
INV#177204

- Adaptor for LH30TA horn for IP66 rating
- (waterproof grommet strain relief)
INV#152637

- Adaptor for LH30TA horn for IP66 rating (threaded
- Conduit fitting (1/2-14NPT)
INV#152638

- Adaptor for LH15TA horn for IP66 rating
- (waterproof grommet strain relief)
INV#152639

- Adaptor for LH15TA horn for IP66 rating (threaded
- Conduit fitting (1/2-14NPT)
INV#152640

- Complex Conic horn used in the STX2, controlled
- 90 x 40 coverage.
INV#69669

- Complex Conic horn used in the STX2, controlled
- 60 x 40 coverage.
INV#69670

- 1" throat Complex Conic horn used in the PN/PNX81
- <
>82, SR81/9; TRX81, 82 < > 121, 90 x 60 .
INV#69674

- 1" throat Complex Conic horn used in the
- PN/PNX61, SR62H and TRX62H: 150 x 60 .
INV#69671

- 1" throat Complex Conic horn used in the PN/PNX81
- <
>82, SR81/9; TRX81, 82 < > 121, 120 x 60 .
INV#69673

- 2" throat Complex Conic horn used in the PN151;
- 90 x 40 (requires ADAPT-1 or ADAPT-2).
INV#69675

- 2" throat Complex Conic horn used in the PN151;
- 60 x 40 coverage (requires ADAPT-1 or ADAPT-2).
INV#69676

- 2" throat Complex Conic horn used in the PN151;
- 40 x 40 (requires ADAPT-1 or ADAPT-2).
INV#69677

- 12" FS Series Arena Horn with 90 x 40 Degree
- Dispersion
INV#193578

- H, 90°, ±10°, 900Hz-6kHz V, 40°, ±10°, 1000Hz-10kHz
- Low Frequency Cut Off
- SPL (1W/1M) w/ PD60 Driver
- 28¼" (718mm)
- 15" (380mm)
INV#56381

- SPL (1W/1M) w/ PD60 Driver
- Low Frequency Cut Off
- Air Column Length
- 18 1/4" (463mm)
- 15" (380mm)
- 22 3/4" (578mm)
INV#56380

- 17 1/2" (44.45 cm)
- 12.00 lbs (5.44 kgs)
- HLE-1, HLE-1T, HLE-3, HLE-3T, MLE-1, MLE-1T, MLE-3, MLE-3T
INV#70176

- 6" (15.24 cm)
- 14" (35.56 cm)
- 17 1/2" (44.45 cm)
- 120° x 60 °
- HLE-1, HLE-1T, HLE-3, HLE-3T, MLE-1, MLE-1T, MLE-3, MLE-3T
- 1203, 1604, 2279, 913, NFPA 503
INV#54921

- 25V / 70.7V 4 Watts Transformer / 161-8 5 oz
INV#70266