Brand:
- Converts mic stands and accessories from 5/8" threading to 3/8"
- Knurled finish provides excellent grip
INV#12532
- Instantly connect or disconnect your mic clip or boom from your stand
- Easy to use quik-release push button
- Shock absorbing rubber washer
- Standard 5/8-27" threading at both ends
- Black color
INV#12639
- 25mm, fits most handheld dynamic mics
- Reduces the effect of low-end rumble and floor vibrations
- Standard 5/8"-27 female threaded brass insert in a heavy-duty plastic base
- Lifetime Warranty
INV#11277
- Specially designed to grip your wireless mics securely
- Memory rubber helps retain its shape use after use
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11274
- Spring loaded to grip your mics securely yet provide quick access
- Soft lining protects your mics and helps prevent slipping
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11267
- Standard thread size fits most brand name ball-shaped dynamic microphones
- Die-cast zinc sphere retainer rings
- Durable wire mesh grille
- Inner foam filter to reduce wind and breath "pop" noises
INV#12552
- Great for picks, capos, phones, small percussion... just about any small accessory
- Mounting bar has a threaded end and positioning washer, which allows you to mount an additional mic...perfect for miking an instrument
- Clamps to any standard mic stand
- Steel construction and easy mounting makes this ideal gig gear
INV#10666
- Use standard mic stands to mount still and video cameras or popular handheld audio recorders
- Ball-head allows for independent pan and tilt with 360 degree pan movement and 180 degree tilt
- 5/8" 27-thread female to 1/4" thread male
INV#12037
- Specially designed interior diamond pattern strengthens its grip on your mics
- Memory rubber helps retain its shape use after use
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11276
- Ideal utility mount for installing 5/8"-27 mic clips, goosenecks, and accessories to flat surfaces
- 3mm shock pad reduces unwanted vibrations
- 2.3" diameter conserves space
- Black finish
INV#11981
- 30mm, fits most handheld wireless mics
- Reduces the effect of low-end rumble and floor vibrations
- Standard 5/8”-27 female threaded brass insert in a heavy-duty plastic base
- Lifetime Warranty
INV#11284
- Standard 5/8"-27 threaded ends will fit most standard mic clips, goosenecks, and booms
- 95 degrees tilt on either side creates versatility
INV#12645
- Easy to use mic clip with special low-profile open design creates a secure grip for dynamic microphones.
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#12495
- Allows you to mount a camera or camcorder onto a mic stand
- Knurled finish provides excellent grip
INV#12531
- Sleek European-syle mic clip made of hard plastic
- For use with most dynamic microphones
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#11279
- Fits large diaphragm condenser mics 42-48mm in diameter
- Clamp interior is lined with cloth to protect your mic
- Die-cast steel adapter with 5/8"-27 threads. Angle adjustments will lock into place
- Black finish
INV#12541
- Converts mic stands and accessories from 3/8" threading to 5/8"
- Knurled outer flange for ease of tightening
- For use with mic stands w/ European 3/8" threads
- Includes 2 in each package
INV#12534
- Perfect choice for adding another mic to your stand for miking drums, cymbals or an acoustic guitar
- Fits most standard mic stands and booms - it will even clamp to the side of most amps
- The adjustable clamping bracket features a nylon tip for a secure hold without damaging the finish of your equipment
- Standard 5/8"-27 threaded ends will fit most standard mic clips and booms
INV#12021
- Attaches to any mic/drum stand shaft with .375-1" tubing
- Cup diameter adj.: 3-3.25"
INV#13402
- Sturdy C-shaped mount for installing 5/8"-27 mic clips and accessories to desk/tabletops
- Nylon tipped screw firmly grips tabletops between 0.625" to 1.625"
- Ideal utility mount for installing 5/8"-27 mic clips and accessories to flat surfaces
INV#11989
- Shock mount fits pencil mics 19-30mm in diameter
- Die-cast steel adapter with 5/8"-27 threads
- Angle adjustments will lock into place
INV#48574
- Turn any existing microphone stand into a double-duty music stand
- 12-1/4" x 10-5/8" bookplate fits into tight places
- Patented u-mount clamp design to lock onto any tubing up to 19 mm (3/4")
- Provides easy angle adjustments
- Perfect for set lists and lyric sheets
INV#11703
- Adds a ball joint with 5/8"-27 male threading to any standard mic stand
- No more wrestling with mic clips to get just the right angle
- 360 degree rotation and 180 degree tilt
- Textured ball and cup for maximum holding strength at any angle
- Over-sized locking knob
- Supports up to 6 lbs
- Chrome-plated steel construction
INV#11741
- Securely attaches to a drum rim
- Standard 5/8"-27 threaded end works with all standard mic clips and slides up/down for precise positioning of your microphone
- A protective rubber coating on all contact surfaces and the isolation cylinders dampen unwanted vibrations
- Easy mic positioning
INV#12939
- 20mm, fits most pencil-style condenser mics
- Reduces the effect of low-end rumble and floor vibrations
- Standard 5/8"-27 female threaded brass insert in a heavy-duty plastic base
- Lifetime Warranty
INV#11278
- Removable mounting block features a flat side to clamp to flat surfaces and a v-groove side to clamp to mic stands
- Nylon tipped screw attaches clamp firmly to any desktop or stand 0.625"-1.625"
- Removable mic clip adapter can be placed in 3 hole locations for optimal mic positioning
INV#52962
- Specially designed interior ribbed pattern to grip your condenser mics securely
- Memory rubber helps retain its shape use after use
- Fits standard 5/8"-27 mic stands, goosenecks, booms and accessories
INV#12981
- Standard 5/8"-27 threaded ends will fit most mic clips, goosenecks, booms and more
- 45 degree angle adjustments on both sides creates versatility
INV#12661
- 6 lb counterweight simply used to add balance to stands and booms with shafts up to 7/8"
- Nylon tipped screw grips shaft securely
- Ideal for off-setting heavy mics on booms or providing stability to stands by attaching to lowest part of shaft or legs
INV#11141
- Isolates mic from floor noise and vibrations
- Standard 5/8-27 threading
- EVA lining protects finish
- Ergonomic adjustment knob for accurate positioning
- Handles mics 55 - 60mm in diameter
INV#12679
- Keeps your miking accessories - headphones, cables, and other small instruments within easy reach
- Fits most standard mic stands and booms
- Attachment piece measures 3" x 3.5"
INV#12029
- Securely attaches to a drum rim
- Works with any 5/8"- 27 mic clip
- Black finish
INV#11980
- 3 lb counterweight simply used to add balance to stands and booms with shafts up to 7/8"
- Nylon tipped screw grips shaft securely
- Ideal for off-setting heavy mics on booms or providing stability to stands by attaching to lowest part of shaft or legs
INV#11140
- Fits large diaphragm condenser mics 42-48mm in diameter
- Clamp interior is lined with cloth to protect your mic
- Die-cast steel adapter with 5/8"-27 threads. Angle adjustments will lock into pl
- Champagne finish
INV#12542
- Ideal utility mount for installing 5/8"-27 mic clips, goosenecks, and accessories to flat surfaces
- 3mm shock pad reduces unwanted vibrations
- 2.3" diameter conserves space
- Chrome finish
INV#11993
- 5/8"-27 male/male adapter
- Compact, only 19mm total length
- Standard threading fits nearly every mic clip, boom arm, and gooseneck on the market
- A must have for every accessory bag
INV#10486
- Ideal utility mount for installing 5/8"-27 mic clips and accessories to flat surfaces
- 1.75" diameter conserves space
- Mounting screws included
- Chrome finish
INV#12811
- Quick release button easily connects and disconnects your microphone clip
- Professional grade high-impact plastic
- Standard 5/8-27" threading at both ends
INV#11991
- 5/8"-27 female/female adapter
- Compact, all-metal design
- Industry standard threading
- A must have for every accessory bag
INV#10501
- Get more gear on your mic stand
- Four standard 5/8"-27 threaded studs accept a variety of mic stand accessories
- u-mount clamp handles mic stands with diameters between .4" and .8" (11mm to 22mm)
- Locking washers allow attachments to mount at any angle
- Dimensions: 5.1" x 2.5" x 1.6"
INV#12563
- Get more gear on your mic stand
- Four standard 5/8"-27 threaded studs accept a variety of mic stand accessories
- u-mount clamp handles mic stands with diameters between .85" and 1.2" (22mm to 30mm)
- Locking washers allow attachments to mount at any angle
INV#12647
- Attaches with 2 wingnut screws
- Heavy-duty rubber clip
- Fits most standard mics
INV#53694
