Brand:
- Omnidirectional Condenser Miniature-Lavalier
- Microphone, Tan
INV#6255
- Clip-on lavalier mic also excels in acoustic guitar applications
- Provides crisp, full-sounding voice and instrument pickup
- Excellent gain before feedback and suppression of background noise
- Operates on phantom power only
INV#5917
- Omnidirectional Condenser Miniature-Lavalier
- Microphone, Black
INV#6889
- Designed for extreme conditions, the EMW's
- Wraparound polymer shell reduces fabric rubbing
- Noise and protects the capsule from shocks and
INV#112173
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#39469
- Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
- Natural and articulate vocal reproduction when used as a clip-on lavalier—clothing clip included
- Excels in pickup of acoustic guitar with included instrument adapter
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Switchable low-frequency roll-off
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Operates on battery or phantom power
- 6' (1.8 m) cable permanently attached between microphone and power module
INV#5748
- Microflex Omnidirectional Lavalier Microphone
INV#9319
- MT830c miniature omnidirectional condenser
- Lavalier microphone terminated for use with
- UniPak transmitter. Includes AT8420 clothing
INV#28530
- Cardioid electret condenser lavalier with clip
- And windscreen
INV#28515
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#60564
- SERIES8 OMNIDIRECTIONAL Condenser Lavalier
- Microphone. Waterproof. Low-profile miniature
- Lavalier is ideal when camouflaging is key
INV#164886
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Supplied dual tie clip holds two microphones for dual miking applications
INV#90010
- Only one tenth of an inch in diameter, the B6 is
- The smallest lavalier in the world and
- Outperforms microphones many times its size. The
INV#189882
- With a variety of colors, mounting options, and accessories, the TL47 is ideal for nearly any lavalier application
- Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response due to the patent pending dual-diaphragm design
- Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement
- Best-in-class low self-noise and dynamic range for cleaner audio production
- Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible superhydrophobic nanoscopic coating
- Paintable 1.6 mm cable that is immune to memory effect and kinks
- Dual redundant ground in cable serves as secondary shield for longevity
- Sound signature: Natural
- Sensitivity: Low
- Connectors: MTQG/TA4F
- Accessories: Accessories not included.
INV#240730
- The TL46 is ideal for a variety of theater, film, broadcast, and live TV applications when additional output (8-10dB) is required
- Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response due to the patent pending dual-diaphragm design
- Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement
- Best-in-class low self-noise and dynamic range for cleaner audio production
- Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible superhydrophobic nanoscopic coating
- Paintable 1.6 mm cable that is immune to memory effect and kinks
- Dual redundant ground in cable serves as secondary shield for longevity
- Sound signature: Natural
- Sensitivity: High
- Connectors: MTQG/TA4F
- Accessories: Available separately
INV#240738
- Lavalier microphone with 3mm condenser mic capsule
- Omnidirectional pickup pattern
- Lightweight/inconspicuous clip design for placement on ties, lapels, etc.
- Ideal for broadcast, presentation, house of worship, theater and other vocal applications
INV#246927
- Omnidirectional lavalier, reduced sensitivity
- (6.3 mV/Pa) with 3.5mm evolution wireless
- Plug,MZQ222 clip and MZW2 windscreen (beige)
INV#5412
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#42255
- Designed for extreme conditions, the EMW's
- Wraparound polymer shell reduces fabric rubbing
- Noise and protects the capsule from shocks and
INV#6060
- Reduced sensitivity (6.3 mV/Pa)
- Pigtails
- MZQ222 clip and MZW2 windscreen
- Dual-diaphragm design virtually eliminates "sweat-outs"
- Stranded, stainless-steel reinforced cable provides maximum strength and low contact noise
- Acoustical equalization via supplied end caps
- 1-year warranty
INV#35221
- IS Series 1.1 mm reinforced cable spool (9m/29.5
- Ft.) with integrated pre-amp for boundary and
- Hanging mic applications (3 oz)
INV#90454
- Cardioid Condenser Lavalier Microphone for CAD
- Audio Wireless - TA4F Connector
INV#128031
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Supplied dual tie clip holds two microphones for dual miking applications
INV#9313
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#60348
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#42695
- Cardioid condenser lavalier microphone. For
- Musical instruments and lavalier use where
- Feedback or room noise is a problem. 11-52V
INV#5916
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#185360
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#40298
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#6068
- Inconspicuous clip-on microphone with mini XLR
- Connector. Rugged metal housing.
INV#61985
- Our B3 is essential to any well-stocked pro audio
- Toolkit: it captures the highest-quality audio
- Available in a lavalier mic, with
INV#120748
- Interchangeable cartridges that provide an optimal choice for each application
- Rotatable tie-clip that pivots in 90 degree increments for placement flexibility
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Supplied snap-fit foam windscreen that controls breath noise and stays on securely
- Supplied dual tie clip holds two microphones for dual miking applications
INV#9310
- The TL46 is ideal for a variety of theater, film, broadcast, and live TV applications when additional output (8-10dB) is required
- Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response due to the patent pending dual-diaphragm design
- Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement
- Best-in-class low self-noise and dynamic range for cleaner audio production
- Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible superhydrophobic nanoscopic coating
- Paintable 1.6 mm cable that is immune to memory effect and kinks
- Dual redundant ground in cable serves as secondary shield for longevity
- Sound signature: Natural
- Sensitivity: High
- Connectors: MTQG/TA4F
- Accessories: Available separately
INV#240735
- Omnidirectional lavalier, reduced sensitivity
- (6.3 mV/Pa) with pigtails. No accessories. (black)
INV#5441
- With a variety of colors, mounting options, and accessories, the TL47 is ideal for nearly any lavalier application
- Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response due to the patent pending dual-diaphragm design
- Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement
- Best-in-class low self-noise and dynamic range for cleaner audio production
- Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible superhydrophobic nanoscopic coating
- Paintable 1.6 mm cable that is immune to memory effect and kinks
- Dual redundant ground in cable serves as secondary shield for longevity
- Sound signature: Natural
- Sensitivity: Low
- Connectors: MTQG/TA4F
- Accessories: Accessories included.
INV#240711
- Omni lavalier, reduced sensitivity, with
- Evolution wireless connector. Includes MZQ222
- Clip and MZW2 windscreen. Black.
INV#29298
- Designed for extreme conditions, the EMW's
- Wraparound polymer shell reduces fabric rubbing
- Noise and protects the capsule from shocks and
INV#38516
