Brand:
- Flexible shockmount fixture for SHM &GM gooseneck
- Mics with XLR male, black, with check nut
INV#119352
- Shock Mount Base with Selectable Soft Switch and
- "Mic Active" LED, Phantom Power Required
INV#34581
- Shock absorbing base mount with flap, 3 Pin
- Female XLR Finish: Black, Gold or Nickel
INV#112237
- Very low profile through-table Shock Mount fitted
- With 3 Pin female XLR input and 3 Pin male XLR
- Output. For use with all Clockaudio goosenecks.
INV#60764
- Mini table stand fitted with TA3F and 10 ft
- Cable. Requires PPA (not included). Finish: Satin
- Black
INV#117820
- Table stand with programmable membrane switch
- Fitted with 5 Pin female XLR input and 7 Pin male
- XLR output. (Logic Control)
INV#176833
- Table stand with programmable membrane switch
- Fitted with 5 Pin female XLR input and 5 Pin male
- XLR output
INV#176834
- Table stand with programmable membrane switch,
- Fitted with TA3M input connector, 5 pin male XLR
- Output, RF PPA built in.Compatible with C3100,
INV#112213
- Table stand with programmable membrane switch
- Fitted with 3 Pin female XLR input and 5 Pin male
- XLR output. (Logic Control)
INV#176835
- Table stand with programmable membrane switch
- Fitted with 3 Pin female XLR
INV#176836
- Table stand fitted with 5 Pin female XLR with
- Latching switch
INV#159907
- Shock Mount Base with Push-To-Talk or
- Push-To-Mute Switch, No Phantom Power Required
INV#9516
- 1-gang wall module with preamp audio input and
- Output, and IR emitter output for emitter;
- Proversion. Used only with Musica or DigiLinX.
INV#155494
- 1-gang wall module with preamp audio output for
- Powered subwoofer or external amplifier;
- Proversion. Used only with Musica or DigiLinX EIM
INV#155495
- Power supply PST-AC1250 12V 5A switch mode power
- Supply with 5.5 X 2.1mm barrel plug includes 3
- Pin cord.For CDT100
INV#185372
- Universal Phantom Power Adaptor with RF
- Filter,9V-48V, permanent install, terminal screw
- Connections.
INV#112208
- UDP Version (For Crestron/AMX logic control users
- Only) Dante Transporter for Audio and Control
- Signals transported over Dante System.
INV#185383
- Phantom Power Adaptor, 6.4 , with knuckle joint,
- TA3F connector to XLR termination with RF Filter.
- Finish: Satin Black.
INV#112210
- 24" Cable Terminated w/Professional 3-pin XLR-F
- And Phoenix-type Terminal Plug DSP Compatible
INV#94490
