Brand:
- Cardioid Dynamic Microphone with DPDT
- Push-to-talk Switch, 19" Gooseneck, 2 3/4" Flange
- And 6' Cable - Chrome - Not Assembled
INV#52202
- Cardioid 18" Desktop Gooseneck Condenser
- Microphone,
INV#62008
- A great choice for speech applications such as DJ rigs, studio talkback, or public address
- Built-in flexible gooseneck for ease of precise, reliable positioning
- Unidirectional polar pattern reduces feedback and off-axis noise for a clear signal
- Built-in connector plugs into an XLR mic input on a console or mixer—no need for a cable
INV#12664
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- Quiet, fixed-placement long-life gooseneck
- Plugs into any standard XLRF-type surface or cable connector
INV#5781
- Includes attached XLR Preamp, shock & flange mount, and snap-fit foam windscreen
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges provide the right polar pattern for every application
- Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
- Shock mount provides over 20 dB isolation from surface vibration noise
- Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
INV#9178
- Interchangeable cartridges that provide an optimal polar pattern choice for each application
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Supplied stand-mount adapter for portable applications
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Accurate sound reproduction with minimum RF interference or electromagnetic hum
INV#9301
- Single color light ring
- Surface-mount
- Logic input/output for remote LED and mute control
- CommShield® Technology for improved RF filtering
INV#94806
- Cardioid 12" Desktop Gooseneck Condenser
- Microphone,
INV#9318
- Includes attached XLR Preamp, shock & flange mount, and snap-fit foam windscreen
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges provide the right polar pattern for every application
- Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
- Shock mount provides over 20 dB isolation from surface vibration noise
- Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
INV#9114
- Designed for high-quality sound reinforcement, professional recording and broadcasting
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no “memory” permits quick positioning into desired shape
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Self-contained electronics eliminate need for external power module
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
- Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
- Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
INV#37145
- Bi-color status indicator
- For wired or wireless desktop bases
- Logic input/output for remote LED and mute control
- CommShield® Technology for improved RF filtering
INV#51049
- Rigid center and flex at both ends
- Uniform frequency response on or off axis
- Flat from 50Hz to 20kHz within + 2dB at 6 inches
- Will handle up to 145dB SPL
- No handling noise
- High rejection of sounds to the rear of the microphone
- Rejects RFI
- Handles high sound pressure levels with high rejection of sounds to the rear of the microphone
- Incredible gain before feedback
- Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
INV#120399
- Cardioid Dynamic Microphone, 19" Gooseneck, 2
- 3/4" Flange and 6' Cable - Chrome - Not Assembled
INV#94458
- Desk Stand for some MX Gooseneck Microphones, 10
- Attached XLR Cable
INV#62022
- Designed for high-quality sound reinforcement, professional recording and broadcasting
- Superior off-axis rejection for maximum gain before feedback
- Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no “memory” permits quick positioning into desired shape
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Self-contained electronics eliminate need for external power module
- Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
INV#37150
- Logic enabled for LED and mute control
- 20 ft (6.1m) attached XLR cable
- Programmable mute switch (push to mute, push to talk, logic, local)
- Low cut filter
- CommShield® Technology
INV#50984
- Supercardioid Attached 10' XLR Cable, Logic
- Functions, Programmable
INV#63176
- Dual-section 18" Gooseneck Condenser Microphone, Inline Pre-Amp, Flange Mount
- Cardioid polar pattern with tailored response for speech
- CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and offers high resistance to intense nearby radio signals
- Frequency response ideal for capturing fast transients in a wide variety of locations, including podiums and desktops
- Superior Shure design and rugged, dependable construction
INV#142265
- Single color light ring
- Surface-mount
- Logic input/output for remote LED and mute control
- CommShield® Technology for improved RF filtering
INV#50315
- Single color light ring
- Surface-mount
- Logic input/output for remote LED and mute control
- CommShield® Technology for improved RF filtering
INV#94799
- Includes attached XLR Preamp, shock & flange mount, and snap-fit foam windscreen
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges provide the right polar pattern for every application
- Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
- Shock mount provides over 20 dB isolation from surface vibration noise
- Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
INV#6905
- Uniform frequency response on or off axis
- Flat from 50Hz to 20kHz within + 2dB at 6 inches
- Will handle up to 145dB SPL
- No handling noise
- High rejection of sounds to the rear of the microphone
- Rejects RFI
- Handles high sound pressure levels with high rejection of sounds to the rear of the microphone
- Incredible gain before feedback
- Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
INV#61780
- Cardioid 12" Gooseneck Condenser Microphone,
- Attached
INV#9309
- Designed for high-quality sound reinforcement, professional recording and broadcasting
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no “memory” permits quick positioning into desired shape
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Self-contained electronics eliminate need for external power module
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
- Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
- Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
INV#37134
- Dual-section 12" Gooseneck Condenser Microphone, Inline Pre-Amp, Flange Mount
- Cardioid polar pattern with tailored response for speech
- CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and offers high resistance to intense nearby radio signals
- Frequency response ideal for capturing fast transients in a wide variety of locations, including podiums and desktops
- Superior Shure design and rugged, dependable construction
INV#142266
- 16" overall length
- Natural accurate sound
- Interchangeable capsule
- Low profile design
- Dual gooseneck sections allows for precise positioning
- Low noise electronics
INV#93254
- XLR Desktop Base, 12' Cable, Black
- Compatible with all Centraverse™ 12" and 18" gooseneck microphones
INV#142260
- LumiComm Touch Ring Omni Boundary Layer
- Installation Microphone, Black - 30kHz
INV#169494
- Cardioid mini-gooseneck
- Natural sound in all applications requiring voice reproduction
- Unidirectional pattern minimizes feedback
- Windscreen included
INV#9510
- Cardioid 80 Hz - 20 kHz M1250B with 12" flexible
- Gooseneck. Requires 18-52 V phantom power. RFI
- Immunity. ATS10 table stand sold separately.
INV#53939
- Includes attached XLR Preamp, shock & flange mount, and snap-fit foam windscreen
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges provide the right polar pattern for every application
- Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
- Shock mount provides over 20 dB isolation from surface vibration noise
- Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
INV#9177
MX405LP/C
Microflex Series Modular Gooseneck Microphone (5", Cardioid, Status Indicator, Less Preamp)
- Bi-color status indicator
- Surface-mount
- Logic input/output for remote LED and mute control
- CommShield® Technology for improved RF filtering
INV#51046
- Response optimised for consistent sound quality
- Unobtrusive slimline design
- Superior grade components
- Engineered in high quality brass
- Finished in satin black
INV#52261
- The ISOMAX 2 is a Countryman classic, still
- Delivering the industry's tightest pattern
- Control for an all-purpose mic. Available in
INV#49776
- Integrated Sennheiser KE10 cardioid microphone capsule for premium audio in universal applications
- RF shielding against intermodulation from wireless devices
- Streamlined design for seamless integration
- High-quality (made in Germany)
INV#94613
- Rugged 12inch (30cm) gooseneck module,
- Programmable mute switch (on/off, push-to-talk,
- Push-to-mute), high RFI immunity, LED ring, XLR
INV#55848
- Rigid center and flex at both ends
- Uniform frequency response on or off axis
- Flat from 50Hz to 20kHz within + 2dB at 6 inches
- Will handle up to 145dB SPL
- No handling noise
- High rejection of sounds to the rear of the microphone
- Rejects RFI
- Handles high sound pressure levels with high rejection of sounds to the rear of the microphone
- Incredible gain before feedback
- Orators can speak above, below or to either side of the microphone and maintain the same pristine sound quality with high intelligibility
INV#120397
- Cardioid condenser microphone on 12inch (30cm)
- Gooseneck, phantom powering module with XLR
- Connector included
INV#92635
- Designed for use as a high-quality talk-back, paging & dispatch microphone in entertainment, commercial and industrial application
- Extremely rugged all-metal construction for long-lasting performance
- Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
- Low-profile element provides uniform cardioid polar pattern with 120° acceptance angle
- Easy-to-adjust, rugged gooseneck permits quick positioning
- Frequency response tailored for excellent intelligibility in environments with excessive ambient noise
- Polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Protective screen reduces wind noise and “popping” when used extremely close
INV#99648
