Brand:

- Lighweight, rigid
- Portable, easy to position
- Clean, elegant appearance
- Exceptional sound quality
- No external power needed
- Attaches to any mic stand
- Can be used horizontally or vertically
INV#59621

- Interchangeable cartridges that provide an optimal polar pattern choice for each application
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Supplied stand-mount adapter for portable applications
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Accurate sound reproduction with minimum RF interference or electromagnetic hum
INV#9301

- Designed for suspension over choirs, instrumental groups and theater stages
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U853R) and white (U853RW)
INV#37160

- Hi-SPL handling is ideal for suspension over choirs and orchestras
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
INV#5777

- Overhead mic for choir, group vocal
- Orchestra miking
- Orchestra miking
- Orchestra miking
- School plays, theatrical productions
INV#14551

- Tailored frequency response ideal for capturing fast transients above choirs and other ensembles
- CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and high resistance to intense nearby radio signals
- Superior Shure design and rugged, dependable construction
INV#142261

- 30kHz flat frequency response
- No spotlighting
- Uniform frequency response on or off axis
- More gain before feedback
- Picks up almost no sound from the rear of the microphone
- Electronics housed in microphone
- Prevents RFI
- Mini-gooseneck allows quick and easy positioning
- Comes with 30 foot balanced, twisted pair Canare cable
- Custom cable lengths available
- Does not come with XLR (order accessory C30-XLR for installed male XLR)
INV#120416

- Designed for suspension over choirs, instrumental groups and theater stages
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U853R) and white (U853RW)
INV#37161

- Tailored frequency response ideal for capturing fast transients above choirs and other ensembles
- CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and high resistance to intense nearby radio signals
- Superior Shure design and rugged, dependable construction
INV#142262

- Lighweight, rigid
- Portable, easy to position
- Clean, elegant appearance
- Exceptional sound quality
- No external power needed
- Attaches to any mic stand
- Can be used horizontally or vertically
INV#80351

- Hi-SPL handling is ideal for suspension over choirs and orchestras
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector
INV#5747

- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
INV#58375

- Hanging ceiling mic with adjustable cable,
- Cardioid, strain relief, high output, RF
- Immunity. White. Includes plenum box with bracing
INV#156962

- Cardioid 60 Hz - 10 kHz Flush mount ceiling mic
- White finish. 12" of cable terminating into
- Phoenix connector. Junction box and mating
INV#115828

- Cardioid 60 Hz - 10 kHz Hanging integrated
- Gooseneck ceiling mic with 12 " gooseneck, white
- Finish. 12" of cable terminating into phoenix
INV#156974

- Overhead mic for choir, group vocal
- Orchestra miking
- Orchestra miking
- Orchestra miking
- School plays, theatrical productions
INV#14552

- Cardioid 60 Hz - 10 kHz Hanging integrated
- Gooseneck ceiling mic with 6 " gooseneck, white
- Finish. 12" of cable terminating into phoenix
INV#156976

- 30kHz flat frequency response
- No spotlighting
- Uniform frequency response on or off axis
- More gain before feedback
- Picks up almost no sound from the rear of the microphone
- Electronics housed in microphone
- Prevents RFI
- Mini-gooseneck allows quick and easy positioning
- Comes with 30 foot balanced, twisted pair Canare cable
- Custom cable lengths available
- Does not come with XLR (order accessory C30-XLR for installed male XLR)
INV#120414

- Tri-Element Array Hanging Condenser Microphone.
- Three high quality Cardiod capsules covering 360
- Degrees with Built in RF Filter
INV#185390

- Hanging ceiling mic with adjustable cable,
- Cardioid, strain relief, high output, RF
- Immunity. White. Includes plenum box with bracing
INV#156964

- Condenser element
- Cardioid Pickup Pattern
- Mini XLR connector
- Steel Hanging positioning bracket
- Hardwired 30-foot cable
- Mini to standard XLR connector included
- Multistage windscreen
- 9-52 Volt Phantom Power Operation
INV#40107

- 30kHz flat frequency response
- No spotlighting
- Uniform frequency response on or off axis
- More gain before feedback
- Picks up almost no sound from the rear of the microphone
- Electronics housed in microphone
- Prevents RFI
- Mini-gooseneck allows quick and easy positioning
- Comes with 30 foot balanced, twisted pair Canare cable
- Custom cable lengths available
- Does not come with XLR (order accessory C30-XLR for installed male XLR)
INV#120415

- Interchangeable cartridges that provide an optimal polar pattern choice for each application
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Supplied stand-mount adapter for portable applications
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Accurate sound reproduction with minimum RF interference or electromagnetic hum
INV#90011

- Lighweight, rigid
- Portable, easy to position
- Clean, elegant appearance
- Exceptional sound quality
- No external power needed
- Attaches to any mic stand
- Can be used horizontally or vertically
INV#58617

- Designed for suspension over choirs, instrumental groups and theater stages
- Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U853PM) and white (U853PMW)
INV#37157

- Overhead mic for choir, group vocal
- Orchestra miking
- Orchestra miking
- Orchestra miking
- School plays, theatrical productions
INV#58368

- Hanging installation microphone
- Internal preamp
- Very uniform polar pattern
- Integrated 25 foot shielded low noise cable
INV#6679

- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
INV#58372

- Tri-element hanging ceiling microphone, low
- Profile, balanced circuit, RF Immunity. Includes
- Plenum box, 25' shielded and plenum rated cable,
INV#175162

- Tri-element hanging ceiling microphone, low
- Profile, balanced circuit, RF Immunity. Includes
- Plenum box, 25' shielded and plenum rated cable,
INV#175161

- 30kHz flat frequency response
- No spotlighting
- Uniform frequency response on or off axis
- More gain before feedback
- Picks up almost no sound from the rear of the microphone
- Electronics housed in microphone
- Prevents RFI
- Mini-gooseneck allows quick and easy positioning
- Comes with 30 foot balanced, twisted pair Canare cable
- Custom cable lengths available
- Does not come with XLR (order accessory C30-XLR for installed male XLR)
INV#99911

- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
INV#58374

- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
INV#58369

- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
INV#58371

- Small, lightweight, low profile
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high sensitivity
INV#80595

- Response optimised for consistent sound quality
- Slimline design
- Engineered in high quality brass
- Strong lightweight cable
- Fully balanced and terminated in male 3 pin XLR
- Short flexible shaft
- Knuckle for easy adjustment of vertical angle
INV#38548

- Response optimised for consistent sound quality
- Slimline design
- Engineered in high quality brass
- Strong lightweight cable
- Fully balanced and terminated in male 3 pin XLR
- Short flexible shaft
- Knuckle for easy adjustment of vertical angle
INV#58376

- Response optimised for consistent sound quality
- PPA2 (CPPW01) mounted on a standard single gang ceiling plate
- Low profile design
- Engineered in high quality brass
- Short flexible shaft
- Finished in satin black or matt white
INV#58377

- Premium hanging choir cardioid condenser
- Microphone with in line preamp
- XLR connector
- 25 ft cable, white
INV#38063

- Hanging installation microphone
- Wide, smooth frequency response
- Cardioid polar pattern
- In line electronics module
INV#38062

- Designed for suspension over choirs, instrumental groups and theater stages
- Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
- UniLine® polar pattern provides narrow 90° acceptance angle
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U853PMU) and white (U853PMWU)
INV#37158