Brand:
- Enables quick interchange of mic clips and mic accessories on mic stands
- Quik-Release button dismounts mic accessories—no need to twist or twirl
- Shock-absorbing washer reduces vibrations and protects mics during mounting
- 5/8"-27 threading on both ends mounts to standard mic stands and mic clips
INV#12639
- Flexible rubber construction enhances grip for dependable mic support
- Expands to fit a variety of mic diameters and returns to its original shape after each use
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#11274
- 25 mm opening delivers a secure grip for handheld dynamic mics
- Integrated shock absorber reduces rumble for clear mic sound
- Heavy-duty brass socket for stable, reliable mounting
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#11277
- Squeeze-to-release grip holds mics securely yet enables quick removal
- Padding protects mics from scratches and enhances grip for dependable mic support
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#11267
- Mounts 5/8"-27 threaded mic accessories on flat surfaces-no need for a floor stand
- Shock pad reduces vibrations and rumble to help maintain pure mic sound
- Compact footprint conserves space on walls and workstations
- Mounting screws included
INV#11981
- Converts mic stands from 5/8" male to 3/8" male threading
- Knurled outer flange increases grip for ease of tightening and loosening
- Enables use of standard mic stands with European mic accessories
INV#12532
- Standard size fits most dynamic mics with a spherical head, such as the SM58
- Metal retainer rings maintain the spherical grille shape
- Durable wire-mesh grille protects the mic capsule from damage
- Internal foam filter reduces vocal pops and hisses as well as breath and wind noise
INV#12552
- Interior diamond-pattern texture enhances grip for dependable mic support
- Expands to fit a variety of mic diameters and returns to its original shape after each use
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#11276
- Mounts cameras or small audio recorders to standard mic stands—no need for a tripod
- Knurled outer flange increases grip for ease of tightening and loosening
INV#12531
- 30 mm opening delivers a secure grip for handheld wireless mics
- Integrated shock absorber reduces rumble for clear mic sound
- Heavy-duty brass socket for stable, reliable mounting
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#11284
- Holds up to seven handheld mics, including wireless, to keep them readily available, safe, and organized
- Silicone padding increases grip and protects mic finishes
- Holds mics in a staggered arrangement for clear viewing and ease of access
- 5/8"-27 center socket and an included 3/8" adapter enables mounting on virtually any mic stand
INV#13394
- 5/8"-27 threading mounts all standard mic clips and accessories
- Wide range of angle adjustment for precise mic positioning
- Holds up to three mic clips simultaneously—no need for multiple floor stands
- Two threaded stems are equidistant from the center for stereo miking
INV#12645
- Slight flexibility provides a secure hold for a variety of mic diameters
- Smooth interior for ease of sliding a microphone in or out
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#12495
- Smooth interior for ease of sliding a microphone in or out
- Tapered shape and slight flexibility provides a secure hold for a variety of mic diameters
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#11279
- Mounts cameras or small audio recorders to standard mic stands—no need for a tripod
- Ball head enables independent 360° pan and 180° tilt to facilitate precise positioning
- 5/8"-27 female and 1/4" male threading mounts to a wide range of mic stands and cameras
INV#12037
- Convenient catchall for small instruments, music accessories, setlists, or drinks
- Built-in threaded stem and tightening washer for mounting an instrument mic
- Clamp adjusts to securely mount to mic stand shafts and booms
- Heavy-duty construction and efficient set up for dependable performance and operation
INV#10666
- Clamp adjusts to fit mic stand shafts and drum hardware 0.375"–1" in diameter
- Cup holder adjusts to fit cups and containers 3"–3.25" in diameter
INV#13402
- Mounts 5/8"-27 threaded mic accessories on flat surfaces—no need for a floor stand
- Clamp firmly grips most desktops or stands and its nylon screw tip prevents scratches
INV#11989
- 5/8"-27 threaded socket mounts to standard mic stands and mic-mounting accessories
- Platform delivers stable support of small monitors and other devices
- Rubber padding enhances grip to prevent equipment from slipping
- Versatile platform can hold a variety of gear to adapt to a wide range of applications
INV#13509
- Converts mic accessories from 5/8" female to 3/8" female threading
- Enables use of standard mic accessories with European mic stands
INV#12533
- Clamp fits large-diaphragm condenser mics 42–48 mm in diameter
- Cloth-lined clamp interior protects mic from scratches
- Heavy-duty steel mount for stable, dependable mic support
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#12541
- Adds support for an additional mic accessory to a mic stand—no need for an additional floor stand
- Fits mic stands, tabletops, and amp cabinets for mic access that adapts to a wide range of applications
- Clamp adjusts to grip a variety of widths and its nylon screw tip prevents scratches
- 5/8"-27 threading mounts all standard mic clips and accessories
INV#12021
- 20 mm opening delivers a secure grip for pencil-style mics
- Integrated shock absorber reduces rumble for clear mic sound
- Heavy-duty brass socket for stable, reliable mounting
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#11278
- Adds extra rotation and tilt to standard mic stands and mic accessories
- Wide range of articulation increases position possibilities for mic clips
- 360° of rotation and 180° of tilt for precise mic placement
- Textured ball and cup prevent slipping to keep your gear safely in place
INV#11741
- Enables a standard mic stand to perform double duty as a music stand
- Bookplate fits into tight spaces and holds standard-size sheet music
- u-mount clamp adjusts to fit a variety of mic stand shafts and booms
- Rotates and tilts for ease of viewing
INV#11703
- Securely clamps to a drum rim to support a mic—no need for a mic stand
- 5/8"-27 threaded stem mounts a wide range of mic clips
- Threaded stem adjusts in distance from the drum head for precise mic placement
- Padded contact points and shock absorbers reduce vibrations for a clean mic signal
INV#12939
- Enables quick interchange of mic clips and mic accessories on mic stands
- Quik-Release button dismounts mic accessories—no need to twist or twirl
- Shock-absorbing washer reduces vibrations and protects mics during mounting
- 5/8"-27 threading on both ends mounts to standard mic stands and mic clips
INV#12668
- 2.5 lb counterweight offsets the weight of mics or booms to increase mic stand balance
- Nylon-tipped set screw grips the mic boom securely without damaging the finish
- Also boosts the stability of mic stands when mounted to the main shaft or tripod legs
INV#11140
- Converts mic accessories from 5/8" female to 3/8" female threading
- Knurled outer flange increases grip to facilitate tightening and loosening
- Enables use of standard mic accessories with European mic stands
- Each package includes two adapters for convenient use with multiple mic stands
INV#12534
- Provides a hook to hang up studio accessories conveniently within reach
- Clamp adjusts to securely attach to various standard mic stand shafts and booms
- Hook measures 3" x 3.5" to provide space for multiple accessories
INV#12029
- 5.5 lb counterweight offsets the weight of mics or booms to increase mic stand balance
- Nylon-tipped set screw grips the mic boom securely without damaging the finish
- Also boosts the stability of mic stands when mounted to the main shaft or tripod legs
INV#11141
- Interior ribbed texture enhances grip for dependable mic support
- Expands to fit a variety of mic diameters and returns to its original shape after each use
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#12981
- Low-profile base slides under pedalboards to conserve floor space
- Three M20 sockets for adding mic stands and guitar hangers adapt the setup to a wide range of applications
- Included Rocker-Lug mic stand reaches over the pedalboard—no need for a boom
- Solid threaded upper shaft with tightening washer securely mounts mic accessories
INV#12868
- Reversible mounting block features a flat side that grips tabletops and a grooved side that grips mic stands
- Clamp firmly grips most desktops or stands and its nylon screw tip prevents scratches
- Mic-clip adapter can be mounted in three locations for precise mic positioning
INV#52962
- Securely clamps to a drum rim to support a mic—no need for a mic stand
- 5/8"-27 threaded stem mounts a wide range of mic clips
INV#11980
- Mounts 5/8"-27 threaded mic accessories on flat surfaces-no need for a floor stand
- Shock pad reduces vibrations and rumble to help maintain pure mic sound
- Compact footprint conserves space on walls and workstations
- Mounting screws included
INV#11993
- Standard 5/8"-27 threaded ends support most mic clips, goosenecks, booms, and other mic accessories
- Wide range of angle adjustment enables precise, adaptable mic positioning
- Holds up to six mic clips simultaneously—no need for multiple floor stands
- Three pairs of threaded stems are equidistant from the center for stereo miking
INV#12661
- Enables mounting together two components with 5/8"-27 male stems
- Compact size and metal construction for unobtrusive, dependable connection
- Standard threading for compatibility with a wide range of mic stands and mic accessories
INV#10501
- Isolates a mic from external vibrations to improve the quality of recordings
- 5/8"-27 threading mounts to a wide range of mic stands and booms
- Padded clamp enhances grip for dependable mic support and protects mic from scratches
- Angle adjustments lock in place for precise mic positioning
INV#12679
- Hangs guitars and basses by the headstock to work with any body style
- Screws into any base with an M20-threaded socket to create a guitar stand
- Height adjusts 24"-38" to adapt to a wide range of guitars and basses
- Yoke folds flat for efficient storage and transportation
INV#13510
- Enables quick interchange of mic clips and mic accessories on mic stands
- High-impact plastic enclosure protects internal parts for dependable performance
- 5/8"-27 threading on both ends mounts to standard mic stands and mic clips
INV#11991
- Enables mounting together two components with 5/8"-27 female sockets
- Compact size and metal construction for unobtrusive, dependable connection
- Standard threading for compatibility with a wide range of mic stands and mic accessories
INV#10486
- Clamp fits small-diaphragm condenser mics 19–30 mm in diameter
- Heavy-duty steel mount for stable, dependable mic support
- 5/8"-27 threading mounts to a wide range of mic stands and booms
- Angle adjustments lock in place for precise mic positioning
INV#48574
- Clamp fits large-diaphragm condenser mics 42–48 mm in diameter
- Cloth-lined clamp interior protects mic from scratches
- Heavy-duty steel mount for stable, dependable mic support
- 5/8"-27 threading mounts to a wide range of mic stands and booms
INV#12542
- Adds support for four mic accessories to a mic stand—no need for additional stands
- Four 5/8"-27 threaded stems accept a wide range of standard mic accessories
- Clamp firmly grips mic stands measuring 0.4"–0.8" (11–22 mm) in diameter
- Tightening washers secure mic accessories from the bottom for ease of positioning
INV#12563
- Adds support for four mic accessories to a mic stand—no need for additional stands
- Four 5/8"-27 threaded stems accept a wide range of standard mic accessories
- Clamp firmly grips mic stands measuring 0.85"–1.2" (22–30 mm) in diameter
- Tightening washers secure mic accessories from the bottom for ease of positioning
INV#12647
