Audio-Technica

UniPoint Series UniLine Hanging Mic (Plate Mount)

Model: U853PMU
UPC: 042005140725
Products Variants:
Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
Available in two colors: black (U853PMU) and white (U853PMWU)
Designed for suspension over choirs, instrumental groups and theater stages
Low-profile design with low-reflectance finish for minimum visibility
Superior off-axis rejection for maximum gain before feedback
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
UniLine® polar pattern provides narrow 90° acceptance angle
UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
Please log in to see your price
Specification Sheet

Customers who bought this product also purchased

Product Properties

Description:

Featuring Audio-Technica’s UniLine® line-cardioid element, the U853PMU condenser hanging microphone comes equipped with a wall/ceiling plate power module for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone also offers UniGuard® innovations that deliver unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine® line cardioid polar patterns. Its 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise.
,
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Line Cardioid
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY –35 dB (17.7 mV) re 1V at 1 Pa
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 124 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 102 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 72 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
SWITCHES Flat, roll-off;
0 dB/+10 dB gain setting
WEIGHT (MICROPHONE) 1.1 oz (30 g)
WEIGHT (POWER MODULE) 3.4 oz (97 g)
DIMENSIONS (MICROPHONE) 6.14" (156.0 mm) long,
0.48" (12.2 mm) diameter
DIMENSIONS (POWER MODULE) 2.80" (71.0 mm) W x
4.55" (115.5 mm) H x
1.42" (36.0 mm) D
OUTPUT CONNECTOR (POWER MODULE) Screw terminals
CABLE 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
OPTIONAL INTERCHANGEABLE ELEMENTS UE-C cardioid (120°);
UE-H hypercardioid (100°);
UE-O omnidirectional (360°)
ACCESSORIES FURNISHED AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter

Viewed Products